Komatsu D85EX-15E0 Bull Dozer Operation and Maintenance Manual PEN01066-02

Description

• Model List:
  • D85EX-15E0 Bull Dozer

• 1. COVER
• 2. FOREWORD
• 2.1. READ THIS MANUAL
• 2.2. IMPORTANT SAFETY INFORMATION
• 2.3. SAFETY LABELS
• 2.3.1. SAFETY LABELS USING PICTOGRAMS
• 2.4. NOISE EMISSION LEVELS
• 2.5. VIBRATION LEVEL
• 2.5.1. VIBRATION OPERATING CONDITION
• 2.5.2. GUIDE TO REDUCE VIBRATION LEVELS ON MACHINE
• 2.6. INTENDED USE
• 2.6.1. USE OF MACHINE
• 2.6.2. GENERAL VIEW AND DIRECTIONS OF MACHINE
• 2.6.3. VISIBILITY FROM OPERATORS SEAT
• 2.7. LOCATION OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
• 2.7.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
• 2.7.2. ENGINE SERIAL NO. PLATE POSITION
• 2.7.3. ADDITIONAL EPA NAMEPLATE
• 2.7.4. BLADE SERIAL NO. PLATE POSITION
• 2.7.5. RIPPER SERIAL NO. PLATE POSITION
• 2.7.6. FLUORINATED GREENHOUSE GASES
• 2.7.7. SERVICE METER POSITION
• 2.7.8. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
• 2.8. SERIAL PLATE
• 2.9. DECLARATION OF CONFORMITY
• 2.10. CONTENTS
• 3. SAFETY
• 3.1. SAFETY
• 3.2. SAFETY LABELS
• 3.2.1. POSITIONS OF SAFETY PICTOGRAMS
• 3.2.2. SAFETY LABELS
• 3.3. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
• 3.3.1. PRECAUTIONS BEFORE STARTING OPERATION
• 3.3.2. PREPARATIONS FOR SAFE OPERATION
• 3.3.3. FIRE PREVENTION
• 3.3.4. PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
• 3.3.5. DO NOT GET CAUGHT IN WORK EQUIPMENT
• 3.3.6. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
• 3.3.7. UNAUTHORIZED MODIFICATION
• 3.3.8. PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
• 3.3.9. PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
• 3.4. PRECAUTIONS FOR OPERATION
• 3.4.1. PRECAUTIONS FOR JOBSITE
• 3.4.2. STARTING ENGINE
• 3.4.3. OPERATION
• 3.4.4. TRANSPORTATION
• 3.4.5. TOWING
• 3.5. PRECAUTIONS FOR MAINTENANCE
• 3.5.1. PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
• 3.5.2. PRECAUTIONS FOR INSPECTION AND MAINTENANCE
• 4. OPERATION
• 4.1. GENERAL VIEW
• 4.1.1. GENERAL VIEW OF MACHINE
• 4.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
• 4.2. EXPLANATION OF COMPONENTS
• 4.2.1. FRONT PANEL
• 4.2.2. SWITCHES
• 4.2.3. CONTROL LEVERS AND PEDALS
• 4.2.4. FUSE
• 4.2.5. CIRCUIT BREAKER FOR MAIN POWER SUPPLY
• 4.2.6. CIRCUIT BREAKER
• 4.2.7. ELECTRIC POWER TAKEOUT ADAPTER
• 4.2.8. CAP WITH LOCK
• 4.2.9. DOOR OPEN LOCK
• 4.2.10. SASH GLASS INTERMEDIATE LOCK
• 4.2.11. DOOR POCKET
• 4.2.12. ASHTRAY
• 4.2.13. TOOL BOX
• 4.2.14. CAR STEREO, HANDLING
• 4.2.15. AIR CONDITIONER, HANDLING
• 4.2.16. HANDLING HEATER
• 4.2.17. EXTERNAL POWER SOURCE TYPE ENGINE PREHEATING HEATER
• 4.3. OPERATION
• 4.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
• 4.3.2. STARTING ENGINE
• 4.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
• 4.3.4. STOPPING ENGINE
• 4.3.5. MACHINE OPERATION
• 4.3.6. SHIFTING GEARS
• 4.3.7. SHIFTING BETWEEN FORWARD AND REVERSE
• 4.3.8. STEERING MACHINE
• 4.3.9. PRECAUTIONS FOR OPERATION
• 4.3.10. WORK POSSIBLE USING BULLDOZER
• 4.3.11. ADJUSTING POSTURE OF WORK EQUIPMENT
• 4.3.12. PARKING MACHINE
• 4.3.13. CHECK AFTER FINISHING WORK
• 4.3.14. LOCKING
• 4.3.15. TIPS FOR LONGER UNDERCARRIAGE LIFE
• 4.4. TRANSPORTATION
• 4.4.1. TRANSPORTATION MEANS
• 4.4.2. REMOVING CAB
• 4.4.3. INSTALLATION OF CAB
• 4.4.4. INSTALLATION OF ROPS
• 4.4.5. LOADING, UNLOADING WORK
• 4.4.6. METHOD OF LIFTING MACHINE
• 4.4.7. PRECAUTIONS FOR TRANSPORTATION
• 4.4.8. TRAVELING ON ROADS
• 4.5. COLD WEATHER OPERATION
• 4.5.1. PRECAUTIONS FOR LOW TEMPERATURE
• 4.5.2. AFTER COMPLETION OF WORK
• 4.5.3. AFTER COLD WEATHER
• 4.6. LONGTERM STORAGE
• 4.6.1. BEFORE STORAGE
• 4.6.2. DURING STORAGE
• 4.6.3. AFTER STORAGE
• 4.7. TROUBLESHOOTING
• 4.7.1. AFTER RUNNING OUT OF FUEL
• 4.7.2. METHOD OF TOWING MACHINE
• 4.7.3. IF BATTERY IS DISCHARGED
• 4.7.4. OTHER TROUBLE
• 5. MAINTENANCE
• 5.1. GUIDE TO MAINTENANCE
• 5.2. OUTLINE OF SERVICE
• 5.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
• 5.2.2. RELATING TO ELECTRIC SYSTEM
• 5.2.3. HANDLING HYDRAULIC SYSTEM
• 5.3. WEAR PARTS LIST
• 5.3.1. WEAR PARTS LIST
• 5.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
• 5.4.1. LUBRICATION CHART
• 5.4.2. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
• 5.4.3. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
• 5.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
• 5.5.1. TORQUE LIST
• 5.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
• 5.6.1. SAFETY CRITICAL PARTS
• 5.7. MAINTENANCE SCHEDULE CHART
• 5.7.1. MAINTENANCE SCHEDULE CHART
• 5.7.2. MAINTENANCE INTERVAL WHEN DIESEL FUEL MIXED WITH BIOFUEL IS USED
• 5.8. SERVICE PROCEDURE
• 5.8.1. INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
• 5.8.2. WHEN REQUIRED
• 5.8.3. CHECK BEFORE STARTING
• 5.8.4. EVERY 250 HOURS SERVICE
• 5.8.5. EVERY 500 HOURS SERVICE
• 5.8.6. EVERY 1000 HOURS SERVICE
• 5.8.7. EVERY 2000 HOURS SERVICE
• 5.8.8. EVERY 4000 HOURS SERVICE
• 5.8.9. EVERY 8000 HOURS SERVICE
• 6. SPECIFICATIONS
• 6.1. SPECIFICATIONS
• 7. ATTACHMENTS, OPTIONS
• 7.1. GENERAL PRECAUTIONS
• 7.1.1. PRECAUTIONS RELATED TO SAFETY
• 7.2. SELECTION OF TRACK SHOE
• 7.2.1. METHOD OF SELECTING SHOES
• 7.3. PROCEDURE FOR SELECTING RIPPER POINT
• 7.4. HANDLING TRIMMING DOZER
• 7.4.1. GENERAL VIEW
• 7.4.2. EXPLANATION OF COMPONENTS
• 7.4.3. MAINTENANCE
• 7.4.4. SPECIFICATIONS
• 7.5. KOMTRAX
• 7.5.1. POWER SUPPLY FOR KOMTRAX
• 8. INDEX