Komatsu HD1200-1, HD985-3, HD785-5, HD785-3, HD605-5, HD465-5, HD405-6, HD325-6 Payload Meter II Operation and Maintenance Manual SEAT000903

Description

• Model List:
  • HD1200-1 Payload Meter II
  • HD985-3 Payload Meter II
  • HD785-5 Payload Meter II
  • HD785-3 Payload Meter II
  • HD605-5 Payload Meter II
  • HD465-5 Payload Meter II
  • HD405-6 Payload Meter II
  • HD325-6 Payload Meter II

• 1. COVER
• 2. INTRODUCTION
• 3. PRECISE USE
• 4. CONTENTS
• 5. GENERAL LOCATIONS
• 5.1. FRONT FACE OF CONTROLLER
• 5.2. LEFT FACE OF CONTROLLER
• 5.3. EXTERNAL DISPLAY LAMPS
• 5.4. COMMUNICATIONS CABLE CONNECTION PORT FOR PERSONAL COMPUTER
• 6. CONTENT OF DISPLAY (CONTROLLER, EXTERNAL DISPLAY LAMPS)
• 6.1. WHEN POWER IS ON
• 6.2. DISPLAY DURING NORMAL OPERATIONS
• 7. EXTERNAL DISPLAY LAMPS
• 7.1. DISPLAY LEVEL FOR LAMPS
• 7.2. ESTIMATE DISPLAY
• 8. DETAILS OF DATA STORED IN MEMORY OF PAYLOAD METER
• 8.1. CYCLE DATA
• 8.2. ENGINE ON/OFF DATA
• 8.3. ABNORMALITY, WARNING DATA
• 8.4. TOTAL PAYLOAD, OVERALL NUMBER OF CYCLES DATA
• 8.5. OTHER DATA
• 9. OPERATION OF SWITHES
• 9.1. CARRYING OUT CALIBRATION
• 9.2. FORCED DISPLAY OF TOTAL PAYLOAD AND OVERALL NUMBER OF CYCLES
• 9.3. OPERATOR CHECK MODE
• 9.4. DIMMING LIGHTS ON MONITOR DISPLAY
• 9.5. ADJUSTING BUZZER SOUND LEVEL
• 9.6. SETTING MASS UNIT
• 9.7. SETTING FORCED PROHIBITION FOR SWITCHES
• 9.8. SERVICE CHECK MODE
• 10. ABNORMALITY AND WARNING DISPLAY (ERROR CODE)
• 11. WHEN F09 IS DISPLAYED FOR THE ERROR CODE (PROCEDURE FOR REPLACING BATTERY)
• 11.1. REPLACING BATTERY
• 11.2. AFTER REPLACING THE BATTERY, DO AS FOLLOWS
• 12. OPERATION IF FCRL IS DISPLAYED AS AN ERROR CODE OR THE CONTROLLER IS REPLACED