Komatsu HD325-6, HD405-6, HD465-5, HD605-5, HD785-3, HD785-5, HD985-3, HD985-5, HD1200-1 Payload Meter II Dump Truck Operation and Maintenance Manual SEATD00904

Description

• Model List:
  • HD325-6 Payload Meter II Dump Truck
  • HD405-6 Payload Meter II Dump Truck
  • HD465-5 Payload Meter II Dump Truck
  • HD605-5 Payload Meter II Dump Truck
  • HD785-3 Payload Meter II Dump Truck
  • HD785-5 Payload Meter II Dump Truck
  • HD985-3 Payload Meter II Dump Truck
  • HD985-5 Payload Meter II Dump Truck
  • HD1200-1 Payload Meter II Dump Truck

• 1. MAIN MENU
• 2. COVER
• 3. INTRODUCTION
• 4. PRECISE USE
• 5. CONTENTS
• 6. GENERAL LOCATIONS
• 6.1. FRONT FACE OF CONTROLLER
• 6.2. LEFT FACE OF CONTROLLER
• 6.3. EXTERNAL DISPLAY LAMPS
• 6.4. COMMUNICATIONS CABLE CONNECTION PORT FOR PERSONAL COMPUTER
• 7. CONTENT OF DISPLAY (CONTROLLER, EXTERNAL DISPLAY LAMPS)
• 7.1. WHEN POWER IS ON
• 7.2. DISPLAY DURING NORMAL OPERATIONS
• 8. EXTERNAL DISPLAY LAMPS
• 8.1. DISPLAY LEVEL FOR LAMPS
• 8.2. ESTIMATE DISPLAY
• 9. DETAILS OF DATA STORED IN MEMORY OF PAYLOAD METER
• 9.1. CYCLE DATA
• 9.2. ENGINE ON/OFF DATA
• 9.3. ABNORMALITY, WARNING DATA
• 9.4. TOTAL PAYLOAD, OVERALL NUMBER OF CYCLES DATA
• 9.5. OTHER DATA
• 10. OPERATION OF SWITCHES
• 10.1. CARRYING OUT CALIBRATION
• 10.2. FORCED DISPLAY OF TOTAL PAYLOAD AND OVERALL NUMBER OF CYCLES
• 10.3. OPERATOR CHECK MODE
• 10.4. DIMMING LIGHTS ON MONITOR DISPLAY
• 10.5. ADJUSTING BUZZER SOUND LEVEL
• 10.6. SETTING MASS UNIT
• 10.7. SETTING FORCED PROHIBITION FOR SWITCHES
• 10.8. SERVICE CHECK MODE
• 11. ABNORMALITY AND WARNING DISPLAY (ERROR CODE)
• 12. WHEN F09 IS DISPLAYED FOR THE ERROR CODE (PROCEDURE FOR REPLACING BATTERY)
• 12.1. REPLACING BATTERY
• 12.2. AFTER REPLACING THE BATTERY, DO AS FOLLOWS
• 13. OPERATION IF FCAL IS DISPLAYED AS AN ERROR CODE OR THE CONTROLLER IS REPLACED