Komatsu PC3000-1 Hydraulic Mining Shovel Operation and Maintenance Manual OMPC30006174

Description

• Model List:
  • PC3000-1 Hydraulic Mining Shovel

• 1. MAIN MENU
• 2. COVER
• 3. INTRODUCTION
• 4. GENERAL CONTENT
• 4.1. TABLE OF CONTENTS
• 5. PART 1. OPERATION MANUAL
• 5.1. EXPLANATION OF ABBREVIATIONS
• 5.2. TABLE OF CONTENTS
• 5.3. FOREWORD
• 5.4. CONSTRUCTION OF THE EXCAVATOR
• 5.4.1. CONSTRUCTION OF THE EXCAVATOR
• 5.4.2. CATWALK IN FRONT OF THE OPERATORS CAB
• 5.4.3. EMERGENCY ESCAPE LADDER
• 5.5. SAFETY INSTRUCTIONS
• 5.5.1. SAFETY INSTRUCTIONS
• 5.5.2. LADDERS, WALKWAYS AND ACCESS DOORS
• 5.5.3. EMERGENCY ENGINE SHUTDOWN FROM GROUND MAN
• 5.5.4. OPERATORS CAB
• 5.5.5. OPERATORS SEAT
• 5.6. OPERATORS CAB, CONTROLS
• 5.6.1. OPERATORS CAB, CONTROLS
• 5.7. OPERATORS CAB, MONITORS
• 5.7.1. ELECTRONIC TEXT AND MONITORING SYSTEM ETM
• 5.7.2. POWER HOUSE CONTROLS
• 5.7.3. MAIN SWITCH BOARD IN CAB BASE
• 5.7.4. PREHEATING SYSTEMS
• 5.7.5. GENERATOR SET
• 5.8. OPERATING INSTRUCTIONS
• 5.8.1. BEFORE STARTING THE ENGINE
• 5.8.2. STARTING THE ENGINE
• 5.8.3. STOPPING THE ENGINE
• 5.8.4. MOVING THE EXCAVATOR
• 5.8.5. SLEWING AND BRAKING THE SUPERSTRUCTURE
• 5.8.6. WORKING WITH THE ATTACHMENT
• 5.8.7. COMBINED OPERATION CYCLES
• 5.8.8. OPERATING THE HEATER AND AIR CONDITIONING
• 5.8.9. OPERATING THE LUBRICATION SYSTEMS
• 5.8.10. FIRE DETECTION AND SUPPRESSION SYSTEM
• 5.9. WORKING INSTRUCTIONS
• 5.9.1. WORKING INSTRUCTIONS
• 5.10. PARKING THE EXCAVATOR
• 5.10.1. PARKING THE EXCAVATOR
• 5.11. REFILLING SYSTEM
• 5.11.1. CENTRAL REFILLING SYSTEM
• 5.11.2. SERVICE CRANE FOR GREASE BARRELS
• 5.12. EXCHANGE OF ATTACHMENT AND/OR COMPONENTS
• 5.12.1. EXCHANGE OF ATTACHMENTS AND/OR COMPONENTS
• 5.13. TRANSPORTATION AND LIFTING OF THE EXCAVATOR
• 5.13.1. TRANSPORTATION AND LIFTING OF THE EXCAVATOR
• 5.14. RETRIEVAL PROCEDURE
• 5.14.1. RETRIEVAL PROCEDURE
• 6. PART 2. LUBRICATION AND MAINTENANCE MANUAL
• 6.1. TABLE OF CONTENTS
• 6.2. FOREWORD
• 6.2.1. FIRE PREVENTION
• 6.2.2. REPAIR WELDINGS
• 6.3. SAFETY INSTRUCTIONS
• 6.3.1. SAFETY INSTRUCTIONS
• 6.4. FUEL AND LUBRICANTS
• 6.4.1. FUEL AND LUBRICANTS
• 6.5. FILLING CAPACITIES
• 6.5.1. FILLING CAPACITIES
• 6.6. LUBRICATION AND MAINTENANCE SCHEDULE
• 6.6.1. LUBRICATION AND MAINTENANCE SCHEDULE
• 6.6.1.1. INITIAL SERVICING
• 6.6.1.2. PERIODIC SERVICING SCHEDULE
• 6.6.1.3. MAINTENANCE OF ENGINE AND MOTOR
• 6.7. LUBRICATION AND MAINTENANCE WORK
• 6.7.1. EVERY 10 HOURS OF OPERATION OR DAILY
• 6.7.2. EVERY 50 HOURS OF OPERATION OR WEEKLY
• 6.7.3. EVERY 250 HOURS OF OPERATION OR MONTHLY
• 6.7.4. EVERY 500 HOURS OF OPERATION OR EVERY 3 MONTHS
• 6.7.5. EVERY 1000 HOURS OF OPERATION OR EVERY 6 MONTHS
• 6.7.6. EVERY 2000 HOURS OF OPERATION OR ANNUALLY
• 6.7.7. EVERY 3000 HOURS OF OPERATION BUT AT LEAST ONCE A YEAR
• 6.7.8. WHEN NECESSARY
• 6.8. EXCAVATOR STORAGE
• 6.8.1. GENERAL
• 6.8.2. PREPARING FOR STORAGE
• 6.8.3. ONE MONTH SERVICE PERIOD
• 6.8.4. SIX MONTH SERVICE PERIOD
• 6.8.5. PREPARING FOR OPERATION
• 6.9. TROUBLESHOOTING
• 6.9.1. GENERAL
• 6.9.2. ENGINE
• 6.9.3. HYDRAULIC SYSTEM
• 6.9.4. TRAVEL AND SLEW GEARS
• 6.9.5. CRAWLER TRACKS