Description
-
Model List:
- PC360LC-11 Hydraulic Excavator
- PC360LC-11E0 Hydraulic Excavator
- 1. COVER
- 2. FOREWORD
- 3. CONTENTS
- 4. Specifications
- 5. Precautions for field assembly
- 6. Disposal of removed parts
- 7. Assembling procedures, applicable equipment and schedule
- 8. Flow of field assembly
- 9. KIT layout diagram
- 10. Transportation
- 11. Tool list for field assembly
- 12. Tightening torque
- 13. Coating materials
- 14. Selection of wire ropes used for assembly
- 15. Selection of nylon slings used for assembly
- 16. Assembly of chassis
- 16.1. A 1. Installation of handrail
- 16.2. A 2. Installation of climbing grip
- 16.3. A 3. Installation of mirror
- 17. Assembling of work equipment
- 17.1. B 1. Installation of arm assembly
- 17.2. B 2. Releasing remaining pressure in hydraulic circuit
- 17.3. B 3. Installation of bucket cylinder hoses between boom and bucket cylinder
- 17.4. B 4. Installation of bucket
- 17.5. B 5. Greasing after completion of work equipment
- 17.6. B 6. Bleeding air from work equipment circuit
- 18. Increasing and decreasing oF track frame gauge, assembling of counterweight
- 18.1. C 1. Adjustment of track tension
- 18.2. C 2. Sticking sheet to revolving frame
- 18.3. C 3. Sticking sheet to counterweight
- 18.4. C 4. Installation of camera
- 18.5. C 5. Installation of counterweight
- 19. Procedure for inspection and maintenance after completion of a ssembly
- 19.1. M 1. Replacement of return filter (Standard filter to flushing filter)
- 19.2. M 2. Flushing of hydraulic circuit
- 19.3. M 3. Replacement of return filter (Flushing filter to standard filter)
- 19.4. M 4. Check of oil/coolant level at each part
- 19.5. M 5. Inspection of oil level in hydraulic tank and refill
- 19.6. M 6. Parts to be touched up after field assembly
- 19.7. M 7. Error code
- 19.8. M 8. ADJUST KomVision Camera angle(KomVision Spec.)
- 20. Mounting bolt torque check sheet
- 21. FIELD ASSEMBLY INSPECTION REPORT
Reviews
There are no reviews yet.