Description
-
Model List:
- PC950-11E0 Hydraulic Excavator
- PC950LC-11E0 Hydraulic Excavator
- 1. Foreword
- 1.1. Table of Contents
- 1.2. Read This Manual
- 1.3. KOMATSU Machine Operator Privacy Policy
- 1.4. Safety Information
- 1.5. Noise
- 1.6. Vibration Level
- 1.6.1. Vibration Operating Condition
- 1.6.2. Guide to Reduce Vibration Levels on Machine
- 1.7. Introduction
- 1.7.1. Main Use of Machine
- 1.7.2. Directions of Machine
- 1.7.3. VISIBILITY FROM OPERATORS SEAT
- 1.8. Engine Technology to Conform to Emission Regulations
- 1.9. Product Information
- 1.9.1. Location of Product Identification Number (PIN) and Machine Serial No. Plate
- 1.9.2. LOCATION OF ENGINE NUMBER PLATE
- 1.9.3. Fluorinated Greenhouse Gases
- 1.9.4. Service Meter Location
- 1.9.5. Your Machine Serial Numbers and Distributor
- 1.10. Serial Plate
- 1.11. Declaration of Conformity
- 1.12. Abbreviation List
- 2. Safety
- 2.1. Safety Labels
- 2.1.1. Location of Safety Labels
- 2.1.2. Safety Labels
- 2.2. General Precautions Common to Operation and Maintenance
- 2.2.1. Precautions Before You Start Operation
- 2.2.2. Prepare for Safety Operation
- 2.2.3. Precautions to Prevent Fire
- 2.2.4. Precautions When You Get on or Off Machine
- 2.2.5. Do Not Get Caught
- 2.2.6. Precautions Related to Protective Structures
- 2.2.7. Protection Against Objects Which Fall, Fly, or Enter
- 2.2.8. Unauthorized Modification
- 2.2.9. Precautions Related to Attachments and Options
- 2.2.10. Precautions for CAB Glass
- 2.2.11. Precautions When You Operate Engine Inside Building
- 2.3. Precautions for Operation
- 2.3.1. Precautions for Jobsite
- 2.3.2. Start Engine
- 2.3.3. Precautions for Operation
- 2.3.4. Precautions for Transportation
- 2.3.5. Towing and being Towed
- 2.3.6. Lifting Operation by Bucket with Hook
- 2.4. Precautions for Maintenance
- 2.4.1. Precautions Before Inspection and Maintenance
- 2.4.2. Precautions for Check and Maintenance
- 2.5. Precautions for DEF
- 2.5.1. General Character and Precautions for Handling
- 2.5.2. Precautions When You Add
- 2.5.3. Precautions for Storage
- 2.5.4. Precautions for Fire Hazard and Leakage
- 2.5.5. Other Precautions
- 3. Operation
- 3.1. General View
- 3.1.1. Machine Equipment Name
- 3.1.2. CAB EQUIPMENT NAME
- 3.1.3. Controls and Gauges Names
- 3.2. Explanation of Components
- 3.2.1. MACHINE MONITOR EQUIPMENT
- 3.2.2. Switches
- 3.2.3. Control Levers and Pedals
- 3.2.4. Other Equipment
- 3.3. Machine Operations and Controls
- 3.3.1. Checks and Adjustment Before You Start Engine
- 3.3.2. START ENGINE
- 3.3.3. OPERATIONS AND CHECKS AFTER YOU START ENGINE
- 3.3.4. STOP ENGINE
- 3.3.5. How to Start Machine (Travel FORWARD and REVERSE) and Stop Machine
- 3.3.6. Steer Machine
- 3.3.7. SWING MACHINE
- 3.3.8. OPERATE WORK EQUIPMENT
- 3.3.9. Handle Working Mode
- 3.3.10. Prohibited Operations
- 3.3.11. Precautions for Operation
- 3.3.12. PRECAUTIONS WHEN YOU OPERATE MACHINE ON SLOPES
- 3.3.13. How to Escape from Mud
- 3.3.14. Recommended Applications
- 3.3.15. Effective Use of Hydraulic Excavator
- 3.3.16. REPLACE BUCKET
- 3.3.17. PARK MACHINE
- 3.3.18. How to Examine After You Complete Work
- 3.3.19. LOCK
- 3.4. AIR CONDITIONER
- 3.4.1. AIR CONDITIONER EQUIPMENT
- 3.4.2. Operate Air Conditioner
- 3.5. Radio (Bluetooth)
- 3.5.1. Explanation of Radio Equipment
- 3.5.2. Operate Radio
- 3.5.3. Radio Setting
- 3.5.4. Stow Antenna
- 3.6. Handle KomVision
- 3.6.1. Precautions When You Use KomVision
- 3.6.2. MONITOR DISPLAY
- 3.7. HANDLE ANCHOR POINT FOR TIEOFF
- 3.8. Transportation
- 3.8.1. Precautions When You Transport Machine
- 3.8.2. Select Transportation Method
- 3.8.3. How to Lift Machine
- 3.8.4. PRECAUTIONS TO LOAD MACHINE
- 3.8.5. Machine Configuration for Transportation
- 3.8.6. Spread and Narrow Track Frame Gauge
- 3.9. Cold Weather Operation
- 3.9.1. Cold Weather Operation Information
- 3.9.2. Precautions After Daily Work Ends in Cold Weather
- 3.9.3. After Cold Weather Season
- 3.10. Precautions for LongTerm Storage
- 3.10.1. Prepare for LongTerm Storage
- 3.10.2. Maintenance During LongTerm Storage
- 3.10.3. STARTING MACHINE AFTER LONGTERM STORAGE
- 3.11. Troubles and Procedures
- 3.11.1. Procedures When You Run Out of Fuel
- 3.11.2. Phenomena that are Not Failures
- 3.11.3. Precautions When You Tow Machine
- 3.11.4. Precautions for Severe Work Condition
- 3.11.5. Precautions for Discharged Battery
- 3.11.6. Other Trouble
- 4. Maintenance
- 4.1. Precautions for Maintenance
- 4.1.1. Examine Service Meter Reading
- 4.1.2. Komatsu Genuine Replacement Parts
- 4.1.3. Komatsu Genuine Lubricants
- 4.1.4. Always Use Clean Washer Fluid
- 4.1.5. Clean Lubricants
- 4.1.6. Check Drained Oil and Used Filter
- 4.1.7. Precautions When You Refill Oil or Fuel
- 4.1.8. Precautions When You Add DEF
- 4.1.9. Precautions for Welding
- 4.1.10. Do Not Drop Things Inside Machine
- 4.1.11. Precautions for KDPF
- 4.1.12. Precautions for SCR Assembly
- 4.1.13. Dusty Jobsites
- 4.1.14. Avoid Mixing Oil
- 4.1.15. Lock Inspection Covers
- 4.1.16. Bleed Air from Hydraulic System
- 4.1.17. Precautions When You Install Hydraulic Hoses
- 4.1.18. Checks After Inspection and Maintenance
- 4.1.19. Select Fuel and Lubricants by Ambient Temperature
- 4.1.20. Close Engine Hood Securely
- 4.1.21. Precautions When You Clean Work Equipment Control Lever
- 4.1.22. HANDLE ANCHOR POINT FOR TIEOFF
- 4.2. Outline of Maintenance
- 4.2.1. Handle Oil, Fuel, Coolant, and Do Oil Clinic
- 4.2.2. Handle Electrical Components
- 4.3. STANDARD TIGHTENING TORQUE FOR BOLTS AND NUTS
- 4.4. Maintenance Schedule
- 4.4.1. Maintenance Schedule Table
- 4.4.2. Maintenance Interval for Hydraulic Breaker
- 4.5. Maintenance Procedure
- 4.5.1. Initial 100 Hours Maintenance (Only After the First 100 Hours)
- 4.5.2. Initial 250 Hours Maintenance (Only After the First 250 Hours)
- 4.5.3. Initial 500 Hours Maintenance (Only After the First 500 Hours)
- 4.5.4. When Required
- 4.5.5. CHECK BEFORE YOU START OPERATION
- 4.5.6. Every 10 Hours Maintenance
- 4.5.7. Every 100 Hours Maintenance
- 4.5.8. Every 250 Hours Maintenance
- 4.5.9. Every 500 Hours Maintenance
- 4.5.10. Every 1000 Hours Maintenance
- 4.5.11. Every 2000 Hours Maintenance
- 4.5.12. EVERY 2500 HOURS MAINTENANCE
- 4.5.13. Every 4000 Hours Maintenance
- 4.5.14. Every 4500 Hours Maintenance
- 4.5.15. EVERY 5000 HOURS MAINTENANCE
- 4.5.16. Every 8000 Hours Maintenance
- 4.5.17. Every 9000 Hours Maintenance
- 4.5.18. Every 6 Months Maintenance
- 5. Specifications
- 5.1. Specifications
- 5.1.1. Specifications PC95011E0
- 5.1.2. Specifications PC95011E0 SE Spec
- 5.1.3. Specifications PC950LC11E0
- 5.1.4. Specifications PC950LC11E0 SE Spec
- 5.2. Explanation of Lift Capacity Chart
- 6. Attachments and Options
- 6.1. Precautions When You Use Attachments and Options Safely
- 6.1.1. Precautions When You Select
- 6.1.2. Read the Operation and Maintenance Manual Thoroughly
- 6.1.3. Precautions When You Remove and Install
- 6.1.4. Precautions for Use
- 6.2. HANDLE ANCHOR POINT FOR TIEOFF
- 6.3. Attachments and Options
- 6.3.1. Install Attachment
- 6.3.2. Track Shoes Selection
- 7. Replacement Parts
- 7.1. Defined Life Parts
- 7.1.1. DEFINED LIFE PARTS LIST
- 7.2. Consumable Parts
- 7.2.1. Consumable Parts List
- 7.3. Recommended Fuel, Coolant, and Lubricant
- 7.3.1. Lubrication Chart
- 7.3.2. How to Use Fuel, Coolant and Lubricants by Ambient Temperature
- 7.3.3. Recommended Brands and Qualities Other Than Komatsu Genuine Oils
- 8. INDEX
Reviews
There are no reviews yet.