Description
-
Model List:
- BW 213 DH-3 Single Drum Roller
- BW 213 PDH-3 Single Drum Roller
- BW 213 PDBH-3 Single Drum Roller
- 1. BW 213 DH3 / BW 213 PDH3
- 2. BW 213 PDBH3
- 3. Single drum roller
- 4. General notes
- 5. Description of indicators and control elements
- 6. General notes
- 7. Tests before starting to operate
- 8. Starting the engine
- 9. Starting with jump leads
- 10. Driving the machine
- 11. Emergency exit
- 12. Operating the parking brake, stopping the machine
- 13. Shutting the engine down
- 14. Switching the vibration on and off
- 15. Adjusting the steering wheel
- 16. Adjusting the seat
- 17. Operating the Dozer Blade (BW 213 PDBH3)
- 18. Moving the hood to maintenance position/closing the hood.
- 19. Towing the machine in case of an engine failure
- 20. Transport
- 21. General notes on maintenance
- 22. Fuels and lubricants
- 23. Table of fuels and lubricants
- 24. Runningin instructions
- 25. Maintenance chart
- 26. Checking the engine oil level
- 27. Checking, cleaning the water separator
- 28. Checking the fuel level
- 29. Checking the hydraulic oil level
- 30. Checking the coolant level
- 31. Checking the Vbelt
- 32. Checking the dust separator on the oil bath air filter
- 33. Checking the tire pressure
- 34. Adjusting the scrapers
- 35. Grease the dozer blade (BW 213 PDBH3)
- 36. Changing engine oil and oil filter cartridge
- 37. Cleaning the cooling fins on radiator and hydraulic oil cooler
- 38. Checking the oil level in the axle
- 39. Checking the oil level in the axle reduction gear
- 40. Checking the oil level in the planetary drives
- 41. Checking the oil level in the vibration bearing housings
- 42. Checking the oil level in the axle reduction gear
- 43. Servicing the battery
- 44. Draining the fuel tank sludge
- 45. Changing the fuel filter cartridges
- 46. Checking Vbelt tension, idler pulley and blower hub
- 47. Changing the oil in the drive axle
- 48. Changing the oil in the planetary drive
- 49. Changing the oil in the axle reduction gear
- 50. Changing the oil in the drum drive reduction gear
- 51. Changing the the oil for the vibration bearings
- 52. Checking the fastening elements on the engine
- 53. Tightening the fastening of the axle to the frame
- 54. Tightening the wheel nuts
- 55. Checking the ROPS
- 56. Cleaning the oil bath air filter
- 57. Checking, adjusting the valve clearance
- 58. Changing the hydraulic oil and the breather filter
- 59. Changing the hydraulic oil filter
- 60. Changing the coolant
- 61. Cleaning, changing the dry air filter cartridge
- 62. Adjusting the parking brake
- 63. Bleeding the fuel system
- 64. Changing the tires
- 65. Changing the fresh air filter in the cabin
- 66. Tightening torques
- 67. Engine conservation
- 68. General notes
- 69. Engine
There are no reviews yet.