Bomag BW 161 ADH-4, BW 202 AD-4, BW 203 AD-4 Tandem Vibratory Roller Operating and Maintenance Instructions 00806301

Description

• Model List:
  • BW 161 ADH-4 Tandem Vibratory Roller
  • BW 202 AD-4 Tandem Vibratory Roller
  • BW 203 AD-4 Tandem Vibratory Roller

• 1. Table of contents
• 2. Foreword
• 3. Technical data
• 4. Safety regulations
• 5. Indicators and Controls
• 5.1. General notes
• 5.2. Description of indicators and control elements
• 6. Operation
• 6.1. General
• 6.2. Tests before taking into operation
• 6.3. Starting the engine
• 6.4. Starting with jump wires
• 6.5. Driving the machine
• 6.6. Stopping the machine, operating the parking brake
• 6.7. Shut down the engine
• 6.8. Switching the vibration on and off
• 6.9. Operating the crabwalk
• 6.10. Switching the pressure sprinkling system on and off
• 6.11. Sprinkling of edge cutterOptional equipment
• 6.12. Actuating the emergency stop switch
• 6.13. Adjusting the drivers seat
• 6.14. Operating the heating/air conditioning systemOptional equipment
• 6.15. Opening or closing the cabin window
• 6.16. Towing
• 6.17. Loading/transport
• 7. Maintenance
• 7.1. General notes on maintenance
• 7.2. Fuels and lubricants
• 7.3. Fuels, lubricants and filling capacities
• 7.4. Runningin instructions
• 7.5. Maintenance table
• 7.6. Every 10 operating hours
• 7.6.1. Checking the engine oil level
• 7.6.2. Checking the fuel level
• 7.6.3. Check the hydraulic oil level
• 7.6.4. Check the coolant level
• 7.6.5. Check the water level
• 7.7. Every 250 operating hours
• 7.7.1. Change the fuel filter cartridge
• 7.7.2. Replacing the fuel prefilter cartridge, bleeding the fuel system
• 7.7.3. Check, clean radiator, fuel cooler, hydraulic oil cooler and intercooler
• 7.7.4. Check the oil level in vibrator shaft tube
• 7.8. Every 500 operating hours
• 7.8.1. Changing engine oil and oil filter cartridge
• 7.8.2. Check the antifreeze concentration and the condition of the coolant
• 7.8.3. Service the air conditioningOptional equipment
• 7.8.4. Cleaning the circulation air filter for the heatingOptional equipment
• 7.8.5. Battery service, checking the main battery switch
• 7.9. Every 1000 operating hours
• 7.9.1. Change the oil in drum drive gear
• 7.9.2. Checking, tensioning, lubricating the steering chain
• 7.9.3. Check the engine mounts
• 7.9.4. Checking the Vbelt, tighten, if necessary replace the Vbelt
• 7.9.5. Check, adjust the valve clearance
• 7.9.6. Changing the oil in the vibrator shaft tube
• 7.9.7. Check the ROPS
• 7.9.8. Check the travel control
• 7.10. Every 2000 operating hours
• 7.10.1. Changing hydraulic oil and breather filter
• 7.10.2. Changing the hydraulic oil filter
• 7.10.3. Greasing the articulated joint
• 7.10.4. Changing the coolant
• 7.11. Every 3000 operating hours
• 7.11.1. Replace the injection valves
• 7.12. As required
• 7.12.1. Check, clean, change the combustion air filter
• 7.12.2. Checking, cleaning the water separator
• 7.12.3. Clean water tank and water filter
• 7.12.4. Water sprinkler system, maintenance in the event of frost
• 7.12.5. Fill the provision tank for the windscreen washer system
• 7.12.6. Adjusting the scrapers
• 7.12.7. Change the fresh air filter in the cabin
• 7.12.8. Tightening torques
• 7.12.9. Engine conservation
• 8. Trouble shooting
• 8.1. General notes
• 8.2. Engine
• 9. Disposal
• 9.1. Final shutdown of machine