Hyster C80ZHD (A282), C60ZHD (A373) Parts Manual

Description

• Model List:
  • C80ZHD (A282), C60ZHD (A373)

• 1. FRAME/DRIVE UNIT
• 1.1. TRACTION MOTOR INSTALLATION
• 1.2. TRACTION MOTOR ASSEMBLY
• 1.3. DRIVE WHEEL AND TIRE AND STATIC STRAP
• 1.4. BATTERY RETENTION
• 1.5. BATTERY ROLLER ASSEMBLY
• 1.6. COVERS AND FLOORMAT
• 1.7. MASTER DRIVE UNIT ASSEMBLY AND ATTACHING PARTS
• 1.8. MASTER DRIVE UNIT STEERING PARTS
• 1.9. MASTER DRIVE UNIT CARRIER
• 1.10. MASTER DRIVE UNIT HOUSING
• 1.11. MASTER DRIVE UNIT DRIVE
• 1.12. MASTER DRIVE UNIT OUTPUT
• 1.13. MASTER DRIVE UNIT TURNTABLE BEARING
• 1.14. MASTER DRIVE UNIT ASSEMBLY AND ATTACHING PARTS SUB-ZERO OPTION
• 1.15. MASTER DRIVE UNIT STEERING PARTS – SUB-ZERO OPTION
• 1.16. MASTER DRIVE UNIT CARRIER – SUB-ZERO OPTION
• 1.17. MASTER DRIVE UNIT HOUSING – SUB-ZERO OPTION ( 8/2019)
• 1.18. MASTER DRIVE UNIT HOUSING – SUB-ZERO OPTION (8/2019 )
• 1.19. MASTER DRIVE UNIT DRIVE – SUB-ZERO OPTION
• 1.20. MASTER DRIVE UNIT OUTPUT – SUB-ZERO OPTION
• 1.21. MASTER DRIVE UNIT TURNTABLE BEARING – SUB-ZERO OPTION
• 1.22. MASTER DRIVE UNIT ASSEMBLY TRACTION MOTOR ASSEMBLY/MASTER DRIVE UNIT ASSEMBLY – MANUAL STEERING AND SUB-ZERO, MANUFACTURING OPTION
• 2. ELECTRICAL SYSTEM
• 2.1. ELECTRICAL
• 2.2. DASH DISPLAY
• 2.3. HIGH SPEED FOOT PEDAL
• 2.4. BATTERY DISCONNECT
• 2.5. CONTROL MODULE AND ATTACHING HARDWARE
• 2.6. CONTACTOR ASSEMBLY WASHDOWN
• 2.7. CONTACTOR ASSEMBLY SUB-ZERO
• 2.8. WIRE HARNESS MAIN
• 2.9. WIRE HARNESS MAIN – ALTERNATE PART, PAGE 1 OF 2
• 2.10. WIRE HARNESS MAIN – ALTERNATE PART, PAGE 2 OF 2
• 2.11. WIRE HARNESS TILLER HANDLE
• 2.12. WIRE HARNESS PUSH BUTTON
• 2.13. WIRE HARNESS RF TERMINAL
• 2.14. WIRE HARNESS STROBE LIGHT
• 2.15. WIRE HARNESS STROBE LIGHT – ALTERNATE PART
• 2.16. WIRE HARNESS FOOT SWITCH
• 2.17. JUMPER HARNESS PARK BRAKE SWITCH
• 2.18. WIRE HARNESS TELEMETRY UPPER DISPLAY
• 2.19. WIRE HARNESS TELEMETRY POWER
• 2.20. WIRE HARNESS TELEMETRY LOWER DISPLAY
• 2.21. WIRE HARNESS TELEMETRY INTERLOCK
• 2.22. BUZZER ASSEMBLY TELEMETRY
• 3. STEER HANDLE/BRAKE SYSTEM
• 3.1. TILLER HEAD ASSEMBLY
• 3.2. PARKING BRAKE ASSEMBLY
• 3.3. THROTTLE SWITCH ASSEMBLY
• 3.4. TILLER HANDLE STANDARD – 17 INCH
• 3.5. TILLER HANDLE STANDARD – 25 INCH
• 3.6. TILLER HANDLE SIDE GLIDE – 17 INCH
• 3.7. TILLER HANDLE SIDE GLIDE – 25 INCH
• 3.8. TILLER ARM ASSEMBLY
• 3.9. BRAKE ASSEMBLY A282
• 3.10. BRAKE ASSEMBLY A373
• 4. LIFT LINKAGE AND FORKS
• 4.1. LIFT LINKAGE
• 4.2. LOAD WHEELS SINGLE WHEEL, TWO BEARINGS
• 4.3. LOAD WHEELS SINGLE WHEEL, TWO BEARINGS – SEALED
• 4.4. LOAD WHEELS SINGLE WHEEL, TWO BEARINGS – SEALED – ALTERNATE CONFIGURATION
• 4.5. LOAD WHEELS SINGLE WHEEL, FOUR BEARINGS
• 4.6. LOAD WHEELS SINGLE WHEEL, FOUR BEARINGS – SEALED
• 4.7. LOAD WHEELS SINGLE WHEEL, FOUR BEARINGS – SEALED – ALTERNATE CONFIGURATION
• 4.8. LOAD WHEELS DUAL WHEEL, 2 BEARINGS
• 4.9. LOAD WHEELS DUAL WHEEL, 4 BEARINGS
• 4.10. LOAD WHEELS DUAL WHEEL, 4 BEARINGS – ALTERNATE CONFIGURATION
• 4.11. LOAD WHEELS TANDEM ASSEMBLY, SEALED BEARING – A282
• 4.12. LOAD WHEELS TANDEM ASSEMBLY, LUBED BEARING – A282
• 4.13. CASTER ASSEMBLY
• 4.14. ENTRY ROLLER
• 4.15. FORK TIP SKID
• 5. HYDRAULIC SYSTEM
• 5.1. HYDRAULIC POWER UNIT
• 5.2. LIFT CYLINDER ASSEMBLY
• 6. OPTIONS
• 6.1. TELEMETRY GROUP WITH DISPLAY
• 6.2. TELEMETRY INTERLOCK WITH CARD READER
• 6.3. RF TERMINAL
• 6.4. VISUAL ALARM
• 6.5. AUDIBLE ALARM
• 6.6. CONVENIENCE TRAY WITHOUT LOAD BACKREST EXTENSION
• 6.7. OPERATOR TRAY
• 6.8. PREMIUM BACK PAD
• 7. FIELD SERVICE KITS
• 7.1. TANDEM LOAD WHEEL KITS A282
• 7.2. TELEMETRY KITS
• 7.3. PALLET ENTRY AND EXIT KITS
• 8. NUMERICAL INDEX