Hyster N30XMH2 (C210) Electric Parts Manual

Description

• Model List:
  • N30XMH2 (C210) Electric

• 1. OVERHEAD GUARD
• 2. COUNTERWEIGHT
• 3. NON-SUSPENSION SEAT
• 4. SUSPENSION SEAT
• 5. FULL SUSPENSION SEAT SHEET 1 OF 2
• 6. FULL SUSPENSION SEAT SHEET 2 OF 2
• 7. ELECTRICAL SYSTEM
• 7.1. ELECTRICAL SYSTEM
• 7.2. CONTROL PANEL
• 7.3. CONTACTOR PANEL CONTROL
• 7.4. CONTACTOR STEERING
• 7.5. CONTACTOR
• 7.6. COWL ELECTRICAL
• 7.7. BATTERY CONNECTOR
• 7.8. WIRE HARNESS DASH
• 7.9. WIRE HARNESS LIGHT
• 7.10. WIRE HARNESS MAIN
• 7.11. WIRE HARNESS CONTROL VALVE SWITCH
• 7.12. ELECTRICAL GUIDANCE
• 7.13. LOAD END SENSOR
• 7.14. ECM GUIDANCE
• 7.15. GUIDANCE SWITCH AND SIGNAL
• 8. DRIVE UNIT
• 8.1. DRIVE AXLE
• 8.2. TRANSMISSION AND DIFFERENTIAL
• 8.3. E/EE/ES AND CRE/FRE INSTALLATION
• 8.4. TRACTION MOTOR 9-INCH
• 8.5. TRACTION MOTOR 9 IN. WITH BWI
• 8.6. TRACTION MOTOR 11.0-INCH
• 9. STEERING SYSTEM
• 9.1. STEERING POD
• 9.2. SHIFT LEVER
• 9.3. STEERING CONTROL UNIT OPTION 1
• 9.4. STEERING HYDRAULIC
• 9.5. STEERING CYLINDER
• 9.6. GEAR PUMP
• 9.7. GEAR PUMP OPTIONAL
• 9.8. STEERING MOTOR WITHOUT BWI ( S/N C210V01743A)
• 9.9. STEERING MOTOR WITHOUT BWI (S/N C210V01744A )
• 9.10. STEERING MOTOR WITH BWI ( S/N C210Y01743A)
• 9.11. STEERING MOTOR WITH BWI (S/N C210V01744A )
• 9.12. STEERING AXLE
• 9.13. STEERING AXLE
• 9.14. STEERING CONTROL UNIT OPTION 2
• 9.15. STEERING AXLE GUIDANCE
• 10. BRAKE/ACCELERATOR SYSTEM
• 10.1. BRAKE PEDAL LINKAGE
• 10.2. MASTER CYLINDER
• 10.3. PARK BRAKE LEVER ACTUATED
• 10.4. PARK BRAKE LINKAGE SEAT ACTUATED ( 7/2002)
• 10.5. PARK BRAKE LINKAGE SEAT ACTUATED (7/2002 )
• 10.6. PARK BRAKE SEAT ACTUATED ( 7/2002)
• 10.7. PARK BRAKE SEAT ACTUATED (7/2002 )
• 10.8. ACCELERATOR
• 10.9. ACCELERATOR PEDAL
• 10.10. ELECTRIC BRAKE
• 10.11. BRAKE SWITCH HARNESS
• 11. HYDRAULIC SYSTEM
• 11.1. HYDRAULIC
• 11.2. DRIVE MOTOR MOUNT
• 11.3. HYDRAULIC PUMP 12 CC SINGLE GEAR PUMP
• 11.4. HYDRAULIC PUMP 12 CC SINGLE GEAR PUMP – OPTIONAL
• 11.5. HYDRAULIC PUMP OPTIONAL
• 11.6. HYDRAULIC PUMP 19 CC DOUBLE GEAR PUMP
• 11.7. HYDRAULIC PUMP 19 CC SINGLE GEAR – OPTIONAL
• 11.8. HYDRAULIC PUMP 19 CC DOUBLE GEAR PUMP LOW NOISE
• 11.9. HYDRAULIC PUMP 19 CC PUMP – LOW NOISE – OPTIONAL
• 11.10. HYDRAULIC MOTOR OPEN CONSTRUCTION WITHOUT BWI
• 11.11. HYDRAULIC MOTOR OPEN CONSTRUCTION WITH BWI
• 11.12. HYDRAULIC MOTOR OPEN CONSTRUCTION WITH BWI – OPTIONAL ( S/N C210V01699V)
• 11.13. HYDRAULIC MOTOR
• 11.14. HYDRAULIC MOTOR CLOSED CONSTRUCTION WITH BWI ( S/N C210V01699Y)
• 11.15. HYDRAULIC MOTOR CLOSED CONSTRUCTION WITH BWI (S/N C210V01700Y )
• 11.16. CONTROL VALVE ATTACHING PARTS
• 11.17. HAND LEVER
• 11.18. HAND LEVER
• 11.19. HYDRAULIC CONTROL VALVE THREE FUNCTION – MANUAL HYDRAULICS
• 11.20. HYDRAULIC CONTROL VALVE FOUR FUNCTION – MANUAL HYDRAULICS
• 11.21. HYDRAULIC TANK
• 11.22. GUIDANCE HYDRAULICS
• 12. Mast-Three Stage Full Free-Lift
• 12.1. OUTER, INTERMEDIATE, AND INNER MAST
• 12.2. CHAINS, PINS, AND ANCHORS
• 12.3. CYLINDER INSTALLATION MAIN LIFT AND FREE-LIFT
• 12.4. LIFT HYDRAULICS
• 12.5. FREE-LIFT CYLINDER
• 12.6. MAIN LIFT CYLINDER
• 12.7. MAST MOUNTING
• 12.8. TRAVERSE BOOM
• 12.9. TRAVERSE FRAME WITH SIDE-SHIFT
• 12.10. TRAVERSE FRAME WITHOUT SIDE-SHIFT
• 12.11. TRAVERSE CYLINDER
• 12.12. SIDE-SHIFT CYLINDER
• 12.13. HEADER HOSE
• 12.14. HOSE REEL
• 12.15. FORK HOOK TYPE WITHOUT SIDE-SHIFT – STANDARD TAPER, 100 MM X 40 MM
• 12.16. FORK PIN TYPE WITH SIDE-SHIFT OR FORK TILT
• 12.17. ACTUATOR
• 13. OPTIONS
• 13.1. BRAKE AND BACK-UP LIGHTS
• 13.2. DRIVE AND REAR LIGHTS
• 13.3. STROBE LIGHT
• 13.4. DC CONVERTER 36/48 VOLT TO 12 VOLT
• 13.5. BACK-UP ALARM
• 13.6. WIRE HARNESS REAR LIGHT
• 13.7. WIRE HARNESS SWITCH
• 13.8. GUIDE ROLLER
• 13.9. BATTERY SLIDE AND ROLLER TRAY
• 13.10. BATTERY SLIDE AND ROLLER TRAY
• 13.11. BATTERY SLIDE AND ROLLER TRAY
• 13.12. WIRE HARNESS TRACTION CUT-OUT
• 13.13. DRIVE WHEEL AND TIRE
• 13.14. STEER TIRE AND WHEEL
• 14. FIELD CONVERSION KITS
• 14.1. DC TO DC CONVERTER KITS
• 15. NUMERICAL INDEX