Komatsu D475A-8E0 Bull Dozer Field Assembly Instruction GEN00210-04

Komatsu D475A-8E0 Bull Dozer Field Assembly Instruction GEN00210-04 - Image 2

Komatsu D475A-8E0 Bull Dozer Field Assembly Instruction GEN00210-04 - Image 3

Komatsu D475A-8E0 Bull Dozer Field Assembly Instruction GEN00210-04

$30.00

Type Of Manual: Field Assembly Instruction
Manual ID: GEN00210-04
Format: PDF
Size: 27.1MB
Number of Pages: 318

Category: Komatsu Operation and Maintenance Manual PDF

Description
Reviews (0)

Description

Model List:
- D475A-8E0 Bull Dozer

1. COVER
2. FOREWORD
3. CONTENTS
4. PRECAUTIONS FOR FIELD ASSEMBLY
5. DISPOSAL OF REMOVED PARTS
6. ASSEMBLY PROCEDURE, NECESSARY EQUIPMENTS, AND SCHEDULE
7. KIT LAYOUT DIAGRAM (WORK SPACE LAYOUT)
8. PACKING STYLE FOR TRANSPORTATION
9. SPECIFICATIONS
10. TOOL LIST FOR FIELD ASSEMBLY
11. DIAGRAM FOR TOOLS
12. TIGHTEN TORQUE TABLE
13. COATING MATERIALS LIST
14. SELECTION OF WIRE ROPES USED FOR ASSEMBLY
15. SELECTION OF NYLON SLINGS USED FOR ASSEMBLY
16. ASSEMBLY PROCEDURE
16.1. A1 Installation of track shoe assembly
16.2. A2 Installation of machine body (chassis)
16.3. A3 Installation of operators cab assembly(When operator cab assembly is not installed)
16.4. A4 Installation of pivot shaft (When pivot shaft is not installed)
16.5. A5 Installation of final drive assembly
16.6. A6 Installation of undercover (When undercover is not installed)
16.7. A7 Installation of blade lift hydraulic cylinder
16.8. A8 Installation of undercarriage 1
16.9. A8 Installation of undercarriage 2
16.10. A9 Adding oil to pivot chamber
16.11. A10 Inspection of oil level and coolant level
16.12. A11 Installation of ripper1 (Machine with ripper)
16.13. A11 Installation of ripper2 (Machine with ripper)
16.14. A11 Installation of ripper3 (Machine with ripper)
16.15. A11 Installation of ripper4 (Machine with ripper)
16.16. A11 Installation of ripper5 (Machine with ripper)
16.17. A11 Installation of ripper6 (Machine with ripper)
16.18. A11 Installation of counterweight (Machine with counterweight)
16.19. A12 Installation of trunnion
16.20. A13 Installation of track
16.21. A14 Adjusting of track tension
16.22. A15 Installation of mask
16.23. A16 Installation of handrail / step on right side of radiator
16.24. A17 Installation of shandrail / step on left side of radiator
16.25. A18 Instalation of cab right side cover(When cab right side cover is not installed)
16.26. A19 Instalation of cab left side cover(When cab left side cover is not installed)
16.27. A20 Assembling of blade unit1 (Machine with semiU blade/fullU blade)
16.28. A20 Assembling of blade unit2 (Machine with semiU blade/fullU blade)
16.29. A20 Assembling of blade unit3 (Machine with semiU blade/fullU blade)
16.30. A20 Assembling of blade unit4 (Machine with semiU blade/fullU blade)
16.31. A20 Assembling of blade unit5 (Machine with semiU blade/fullU blade)
16.32. A20 Assembling of blade unit1 (Machine with superdozer blade)
16.33. A20 Assembling of blade unit2 (Machine with superdozer blade)
16.34. A20 Assembling of blade unit3 (Machine with superdozer blade)
16.35. A20 Assembling of blade unit4 (Machine with superdozer blade)
16.36. A20 Assembling of blade unit5 (Machine with superdozer blade)
16.37. A21 Installation of blade assembly (Machine with semiU blade/fullU blade)
16.38. A21 Installation of blade assembly (Machine with superdozer blade)
16.39. A22 Installation of KOMTRAX antenna
16.40. A23 Installation of ROPS
16.41. A24 Installation of engine air intake port hood(When engine air intake port hood is not installed)
16.42. A25 Installation of precleaner (optional)(When precleaner is not installed)
16.43. A26 Installation of engine exhaust pipe(When engine exhaust pipe is not installed)
16.44. A27 Installation of headlamp (When headlamp is not installed)
16.45. A28 Installation of giant ripper shank
16.46. A29 Adjustment of blade tilt control angle(Machine with semiU blade/fullU blade)
16.47. A30 Adjustment of blade tilt control angle(Machine with superdozer)
16.48. A31 Installation of platform1
16.49. A31 Installation of platform2
16.50. A31 Installation of platform3
16.51. A31 Installation of platform4
16.52. A32 Greasing each part
16.53. A33 Bleeding air from hydraulic cylinder
16.54. A34 Bleeding air from work equipment pump and fan pump
16.55. A35 Installation of quick charge piping (optional)
16.56. A36 Installation of ladder 1 (For machine with ladder)
16.57. A36 Installation of ladder 2 (For machine with ladder)
16.58. A36 Installation of ladder 3 (For machine with ladder)
16.59. A36 Installation of ladder 4 (For machine with ladder)
16.60. A36 Installation of ladder 5 (For machine with ladder)
16.61. A37 Installation of ladder 1 (For machine with retrofitting ladder)
16.62. A37 Installation of ladder 2 (For machine with retrofitting ladder)
16.63. A37 Installation of ladder 3 (For machine with retrofitting ladder)
16.64. A37 Installation of ladder 4 (For machine with retrofitting ladder)
16.65. A37 Installation of ladder 5 (For machine with retrofitting ladder)
16.66. A37 Installation of ladder 6 (For machine with retrofitting ladder)
16.67. A37 Installation of ladder 7 (For machine with retrofitting ladder)
16.68. A38 Installation of access light and additional work lamp (optional)
17. CHECK AND MAINTENANCE PROCEDURES
17.1. M1 Checking machine monitor 1
17.2. M1 Checking machine monitor 2
17.3. M1 Checking machine monitor 3
17.4. M1 Checking machine monitor 4
17.5. M1 Checking machine monitor 5
17.6. M2 Adjustment menu
17.7. M3 Change of return filter (Standard filter Flushing filter)
17.8. M4 Flushing hydraulic circuit and bleeding air from cylinder 1
17.9. M5 Change of return filter (Flushing filter > Standard filter)
17.10. M6 Bleeding air from cylinder 2
17.11. M7 How to start operation of KOMTRAX terminal and how to initializeKOMTRAX Plus controller
17.12. M8 Noinjection cranking of engine
18. APPENDIX 1 INSTALLATION OF SPILL GUARDS
19. APPENDIX 2 FIELD ASSEMBLY INSPECTION REPORT
20. APPENDIX 3 PmCLINIC