Komatsu MX352, MX502 Hydraulic Excavator Shop Manual SEBM035400
Komatsu MX352, MX502 Hydraulic Excavator Shop Manual SEBM035400 - Image 2
Komatsu MX352, MX502 Hydraulic Excavator Shop Manual SEBM035400 - Image 3
Komatsu MX352, MX502 Hydraulic Excavator Shop Manual SEBM035400 - Image 4
Komatsu MX352, MX502 Hydraulic Excavator Shop Manual SEBM035400 - Image 5

Komatsu MX352, MX502 Hydraulic Excavator Shop Manual SEBM035400

$50.00

  • Type Of Manual: Shop Manual
  • Manual ID: SEBM035400
  • Format: PDF
  • Size: 27.5MB
  • Number of Pages: 491
Category:

Description

  • Model List:

    • MX352 Hydraulic Excavator
    • MX502 Hydraulic Excavator
  • 0.1. HOW TO READ THE SHOP MANUAL
  • 0.2. HOISTING INSTRUCTIONS
  • 0.3. METHOD OF DISASSEMBLING, CONNECTING PUSHPULL TYPE COUPLER
  • 0.4. COATING MATERIALS
  • 0.5. STANDARD TIGHTENING TORQUE
  • 0.6. ELECTRIC WIRE CODE
  • 0.7. CONVERSION TABLE
  • 0.8. UNITS
  • 1. GENERAL
  • 1.1. SPECIFICATION DIMENSION DRAWING
  • 1.2. WORKING RANGE DRAWING
  • 1.3. SPECIFICATIONS
  • 1.4. WEIGHT TABLE
  • 1.5. LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS
  • 2. STRUCTURE, FUNCTION AND MAINTENANCE STANDARD
  • 2.2. COOLING SYSTEM
  • 2.3. POWER TRAIN
  • 2.4. SWING CIRCLE
  • 2.5. SWING MACHINERY
  • 2.6. HYDRAULIC COMPONENTS LAYOUT DRAWING
  • 2.7. HYDRAULIC TANK
  • 2.8. CENTER SWIVEL JOINT
  • 2.9. TRAVEL MOTOR
  • 2.10. HYDRAULIC CYLINDER
  • 2.11. SOLENOID VALVE
  • 2.12. MULTICONTROL VALVE
  • 2.13. HYDRAULIC PUMP
  • 2.14. CONTROL VALVE
  • 2.15. CLSS
  • 2.16. OPERATION FOR EACH FUNCTION AND VALVE
  • 2.17. SWING MOTOR
  • 2.18. PPC VALVE
  • 2.19. WORK EQUIPMENT
  • 2.20. DIMENSIONS OF EACH PART OF WORK EQUIPMENT
  • 2.21. FLOOR
  • 2.22. AIR CONDITIONER
  • 2.23. ENGINE CONTROL
  • 2.24. ELECTRIC CONTROL SYSTEM
  • 2.25. COMPONENT PARTS OF SYSTEM
  • 2.26. MONITOR SYSTEM
  • 2.27. MONITOR PANEL
  • 2.28. SENSORS
  • 3. TESTING AND ADJUSTING
  • 3.1. STANDARD VALUE TABLE FOR ENGINE RELATED PARTS
  • 3.2. STANDARD VALUE TABLE FOR CHASSIS RELATED PARTS
  • 3.3. TESTING AND ADJUSTING
  • 3.3.1. LIST OF TESTING, ADJUSTING, AND TROUBLESHOOTING TOOLS
  • 3.3.2. MEASURING ENGINE SPEED
  • 3.3.3. MEASUREMENT OF EXHAUST GAS COLOR
  • 3.3.4. ADJUSTING VALVE CLEARANCE
  • 3.3.5. MEASURING COMPRESSION PRESSURE
  • 3.3.6. MEASURING ENGINE OIL PRESSURE
  • 3.3.7. TESTING AND ADJUSTING FUEL INJECTION TIMING
  • 3.3.8. TESTING AND ADJUSTING ALTERNATOR BELT TENSION
  • 3.3.9. ADJUSTING FUEL CONTROL LEVER
  • 3.3.10. TESTING WEAR OF SPROCKET
  • 3.3.11. TESTING AND ADJUSTING TRACK SHOE TENSION
  • 3.3.12. MEASURING AND ADJUSTING OIL PRESSURES IN WORK EQUIPMENT, TRAVEL, BOOM SWING, SWING, AND BLADE CIRCUITS
  • 3.3.13. MEASURING AND ADJUSTING LS DIFFERENTIAL PRESSURE
  • 3.3.14. ADJUSTING PC VALVE
  • 3.3.15. MEASURING AND ADJUSTING CONTROL PUMP CIRCUIT OIL PRESSURE
  • 3.3.16. MEASURING SOLENOID VALVE OUTPUT PRESSURE
  • 3.3.17. MEASURING PPC VALVE OUTPUT PRESSURE
  • 3.3.18. ADJUSTING PPC VALVE
  • 3.3.19. MEASURING SWING HOLDING BRAKE RELEASE PRESSURE
  • 3.3.20. TESTING AND ADJUSTING TRAVEL DEVIATION
  • 3.3.21. MEASUREMENT OF OIL LEAKAGE FROM WORK EQUIPMENT CYLINDER
  • 3.3.22. BLEEDING AIR FROM EACH PART
  • 3.3.23. RELEASING RESIDUAL PRESSURE FROM HYDRAULIC CIRCUIT
  • 3.3.24. RELEASING RESIDUAL PRESSURE FROM HYDRAULIC TANK
  • 3.3.25. PRESSURIZING HYDRAULIC TANK
  • 3.3.26. INSPECTION PROCEDURES FOR DIODE
  • 3.4. TROUBLESHOOTING
  • 3.4.1. POINTS TO REMEMBER WHEN TROUBLESHOOTING
  • 3.4.2. SEQUENCE OF EVENTS IN TROUBLESHOOTING
  • 3.4.3. POINTS TO REMEMBER WHEN CARRYING OUT MAINTENANCE
  • 3.4.4. CHECKS BEFORE TROUBLESHOOTING
  • 3.4.5. CLASSIFICATION AND PROCEDURES OF TROUBLESHOOTING
  • 3.4.6. TYPES AND LOCATIONS OF CONNECTORS
  • 3.4.7. CONNECTOR ARRANGEMENT DIAGRAM
  • 3.4.8. CONNECTION TABLE FOR CONNECTOR PIN NUMBERS
  • 3.4.9. TADAPTER BOXES AND TADAPTER TABLE
  • 3.4.10. TROUBLESHOOTING OF ELECTRICAL SYSTEM (E MODE)
  • 3.4.11. TROUBLESHOOTING OF HYDRAULIC AND MECHANICAL SYSTEM (H MODE)
  • 3.4.12. TROUBLESHOOTING OF MONITOR PANEL SYSTEM (M MODE)
  • 3.4.13. TROUBLESHOOTING OF ENGINE (S MODE)
  • 4. DISASSEMBLY AND ASSEMBLY
  • 4.1. HOW TO READ THIS MANUAL
  • 4.2. PRECAUTIONS WHEN PERFORMING OPERATION
  • 4.3. SPECIAL TOOL LIST
  • 4.4. SKETCHES OF SPECIAL TOOLS
  • 4.5. REMOVAL AND INSTALLATION OF RADIATOR AND HYDRAULIC OIL COOLER
  • 4.6. REMOVAL AND INSTALLATION OF ENGINE AND HYDRAULIC PUMP
  • 4.7. REMOVAL AND INSTALLATION OF TRACK SHOE
  • 4.8. DISASSEMBLY AND ASSEMBLY OF IDLER
  • 4.9. DISASSEMBLY AND ASSEMBLY OF RECOIL SPRING
  • 4.10. DISASSEMBLY AND ASSEMBLY OF TRACK ROLLER
  • 4.11. DISASSEMBLY AND ASSEMBLY OF CARRIER ROLLER
  • 4.12. REMOVAL AND INSTALLATION OF CENTER SWIVEL JOINT
  • 4.13. DISASSEMBLY AND ASSEMBLY OF CENTER SWIVEL JOINT
  • 4.14. REMOVAL AND INSTALLATION OF FLOOR FRAME ASSEMBLY
  • 4.15. REMOVAL AND INSTALLATION OF SWING MOTOR AND SWING MACHINERY
  • 4.16. DISASSEMBLY AND ASSEMBLY OF SWING MOTOR AND SWING MACHINERY
  • 4.17. REMOVAL AND INSTALLATION OF WORK EQUIPMENT
  • 4.18. REMOVAL AND INSTALLATION OF REVOLVING FRAME
  • 4.19. REMOVAL AND INSTALLATION OF SWING CIRCLE
  • 4.20. DISASSEMBLY AND ASSEMBLY OF CONTROL VALVE
  • 4.21. DISASSEMBLY AND ASSEMBLY OF HYDRAULIC CYLINDER ASSEMBLY
  • 4.22. REMOVAL AND INSTALLATION OF AIR CONDITIONER UNIT
  • 5. OTHERS
  • 5.1. HYDRAULIC CIRCUIT DIAGRAM MX352
  • 5.2. HYDRAULIC CIRCUIT DIAGRAM MX502
  • 5.3. HYDRAULIC CIRCUIT DIAGRAM (Additional attachment circuit) MX502
  • 5.4. ELECTRICAL CIRCUIT DIAGRAM MX352 (1/2)
  • 5.5. ELECTRICAL CIRCUIT DIAGRAM MX352 (2/2)
  • 5.6. ELECTRICAL CIRCUIT DIAGRAM MX502 (1/2)
Rate this product

Reviews

There are no reviews yet.

Be the first to review “Komatsu MX352, MX502 Hydraulic Excavator Shop Manual SEBM035400”

Your email address will not be published. Required fields are marked *

Related products