Komatsu PC12R-8, PC12R-8HS, PC15R-8, PC15R-8HS Hydraulic Excavator Operation and Maintenance Manual WEAM002703

Description

• Model List:
  • PC12R-8 Hydraulic Excavator
  • PC12R-8HS Hydraulic Excavator
  • PC15R-8 Hydraulic Excavator
  • PC15R-8HS Hydraulic Excavator

• 1. EAMPC12.PDF
• 1.1. FOREWORD
• 1.2. INFORMATION ON SAFETY
• 1.3. INTRODUCTION
• 1.3.1. INTENDED USES
• 1.3.2. IMPROPER OR UNAUTHORIZED USES
• 1.3.3. MAIN CHARACTERISTICS
• 1.3.4. RUNNINGIN
• 1.4. PRODUCT IDENTIFICATION
• 1.4.1. MACHINE SERIAL NUMBER
• 1.4.2. MACHINE IDENTIFICATION PLATE
• 1.4.3. ENGINE SERIAL NUMBER AND EXHAUST GAS EMISSION PLATE
• 1.4.4. TRAVEL REDUCTION GEAR SERIAL NUMBER
• 1.4.5. SWING REDUCTION GEAR SERIAL NUMBER
• 1.4.6. CAB SERIAL NUMBER
• 1.5. TABLE OF CONTENTS
• 1.5.1. SAFETY, NOISE AND VIBRATION PLATES
• 1.5.2. GENERAL PRECAUTIONS
• 1.5.3. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
• 1.5.4. PRECAUTIONS TO BE TAKEN WHEN WORKING
• 1.5.5. TRANSPORTING THE MACHINE ON MOTOR VEHICLES
• 1.5.6. BATTERY
• 1.5.7. PRECAUTIONS FOR THE REMOVAL
• 1.5.8. PRECAUTIONS FOR MAINTENANCE
• 1.6. POSITION
• 1.7. COLOUR
• 1.8. CAPACITY (A)
• 1.9. INVOLVED CIRCUIT
• 1.9.1. USE OF THE MACHINE
• 1.9.2. PARKING THE MACHINE
• 1.9.3. STOPPING THE ENGINE
• 1.9.4. TRANSPORTING THE MACHINE ON MOTOR VEHICLES
• 1.9.5. LIFTING THE MACHINE
• 1.9.6. PRECAUTIONS TO BE TAKEN IN THE COLD SEASON
• 1.10. CHARGE PERCENTAGE
• 1.11. FLUID TEMPERATURE
• 1.11.1. OTHER PRECAUTIONS
• 1.11.2. PRECAUTIONS TO BE TAKEN AT THE END OF WORK
• 1.11.3. PRECAUTIONS TO BE TAKEN IN THE WARM SEASON
• 1.11.4. USING THE WORK EQUIPMENT
• 1.11.5. USING THE MACHINE WITH VARIABLE TRACK GAUGE
• 1.11.6. LONG PERIODS OF INACTIVITY
• 1.11.7. TROUBLESHOOTING
• 1.11.8. GUIDE TO MAINTENANCE
• 1.11.9. MAINTENANCE NOTES
• 1.12. Minimum ambient temperature (C)
• 1.13. Quantity of antifreeze (l)
• 1.14. Quantity of water (l)
• 1.14.1. NOTES REGARDING THE HYDRAULIC SYSTEM
• 1.14.2. NOTES REGARDING THE ELECTRICAL SYSTEM
• 1.14.3. NOTES REGARDING LUBRICATION
• 1.14.4. PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING
• 1.17. EVERY 250 HOURS
• 1.18. YM11930535150
• 1.20. EVERY 500 HOURS
• 1.21. YM12455055700
• 1.23. EVERY 500 HOURS
• 1.24. YM12905255630
• 1.26. EVERY 500 HOURS
• 1.27. YM11965512560
• 1.29. EVERY 500 HOURS
• 1.29.1. FUEL, COOLANT AND LUBRICANTS
• 1.30. WATER ANTIFREEZE
• 1.31. PERMANENT COOLANT
• 1.31.1. LUBRICATION WITH GREASE
• 1.32. NLGI 2
• 1.33. SUPPLIER
• 1.34. HEES SYNTHETIC BIODEGRADABLE OIL
• 1.34.1. DRIVING TORQUES FOR SCREWS AND NUTS
• 1.34.2. SPECIFIC DRIVING TORQUES
• 1.35. 0.5 5.5 0.5
• 1.36. 5 54 5
• 1.37. 0.5
• 1.38.1. LUBRICATION
• 1.38.2. PERIODICAL CHANGE OF THE COMPONENTS CONNECTED WITH SAFETY
• 1.43. Every 2 years or 4000 hours, whichever occurs first
• 1.43.1. MAINTENANCE PLAN
• 1.43.2. MAINTENANCE INTERVALS IN CASE OF USE OF THE DEMOLITION HAMMER (BREAKER)
• 1.45.1. CHECKS BEFORE STARTING
• 1.45.2. MAINTENANCE EVERY 100 HOURS OF OPERATION
• 1.45.3. MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION (Operations to be carried out together w…
• 1.47.1. MAINTENANCE EVERY 250 HOURS OF OPERATION
• 1.47.2. MAINTENANCE EVERY 500 HOURS OF OPERATION
• 1.47.3. MAINTENANCE EVERY 1000 HOURS OF OPERATION
• 1.48.1. MAINTENANCE EVERY 2000 HOURS OF OPERATION
• 1.48.2. WHEN REQUIRED
• 1.48.3. MAINTENANCE INTERVALS IN CASE OF USE OF THE DEMOLITION HAMMER (BREAKER)
• 1.48.4. MAINTENANCE AFTER THE FIRST 50 HOURS OF OPERATION (Only for machines in which the synthetic…
• 1.48.5. MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION
• 1.48.6. MAINTENANCE EVERY 250 HOURS OF OPERATION
• 1.48.7. MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION (Only for machines in which the syntheti…
• 1.48.8. MAINTENANCE EVERY 500 HOURS OF OPERATION
• 1.48.9. MAINTENANCE EVERY 1000 HOURS OF OPERATION
• 1.48.10. MAINTENANCE EVERY 2000 HOURS OF OPERATION
• 1.49. TECHNICAL DATA
• 1.49.1. STANDARD OVERALL DIMENSIONS PC12R
• 1.49.2. TECHNICAL CHARACTERISTICS PC12R
• 1.49.3. TOTAL MASS
• 1.49.4. STANDARD BUCKET CAPACITY
• 1.49.5. ENGINE
• 1.49.6. ELECTRICAL SYSTEM
• 1.49.7. UPPER STRUCTURE ROTATION
• 1.49.8. SPEEDS
• 1.49.9. TOTAL MASS
• 1.49.10. STANDARD BUCKET CAPACITY
• 1.49.11. ENGINE
• 1.49.12. ELECTRICAL SYSTEM
• 1.49.13. UPPER STRUCTURE ROTATION
• 1.49.14. SPEEDS
• 1.49.15. TOTAL MASS
• 1.49.16. STANDARD BUCKET CAPACITY
• 1.49.17. ENGINE
• 1.49.18. ELECTRICAL SYSTEM
• 1.49.19. UPPER STRUCTURE ROTATION
• 1.49.20. SPEEDS
• 1.49.21. TOTAL MASS
• 1.49.22. STANDARD BUCKET CAPACITY
• 1.49.23. ENGINE
• 1.49.24. ELECTRICAL SYSTEM
• 1.49.25. UPPER STRUCTURE ROTATION
• 1.49.26. SPEEDS
• 1.49.27. AUTHORIZED OPTIONAL EQUIPMENT
• 1.49.28. (PC15RPC15R HS)
• 1.49.29. ARRANGEMENT FOR THE INSTALLATION OF THE DEMOLITION HAMMER (BREAKER)