Komatsu PC360LC-11 Hydraulic Excavator Field Assembly Instruction GEN00130-04

Description

• Model List:
  • PC360LC-11 Hydraulic Excavator

• 1. COVER
• 2. FOREWORD
• 3. CONTENTS
• 4. Specifications
• 5. Precautions for Field Assembly
• 6. Disposal of Removed Parts
• 7. Assembling Procedures, Applicable Equipment and Schedule
• 8. Flow of field assembly
• 9. KIT Layout Diagram
• 10. Transportation
• 11. Tightening Torque
• 12. Coating Materials
• 13. Selection of wire ropes used for assembly
• 14. Selection of nylon slings used for assembly
• 15. Assembly of Chassis
• 15.1. A1. Installation of handrail
• 15.2. A2. Installation of climbing grip
• 15.3. A3. Installation of mirror
• 16. Assembling of Work Equipment
• 16.1. B1. Installation of arm assembly
• 16.2. B2. Releasing remaining pressure in hydraulic circuit
• 16.3. B3. Installation of bucket cylinder hoses between boom and bucket cylinder
• 16.4. B4. Installation of bucket
• 16.5. B5. Greasing after completion of work equipment
• 16.6. B6. Bleeding air from work equipment circuit
• 17. Increasing and decreasing oF track frame gauge, assembling of counterweight
• 17.1. C1. Adjustment of track tension
• 17.2. C2. Sticking sheet to counterweight
• 17.3. C3. Installation of camera
• 17.4. C4. Installation of counterweight
• 18. Procedure for Inspection and Maintenance after Completion of Assembly
• 18.1. M1. Replacement of return filter (Standard filter to flushing filter)
• 18.2. M2. Flushing of hydraulic circuit
• 18.3. M3. Replacement of return filter (Flushing filter to standard filter)
• 18.4. M4. Check of oil/coolant level at each part
• 18.5. M5. Inspection of oil level in hydraulic tank and refill
• 18.6. M6. Parts to be touched up after field assembly
• 18.7. M7. Error code
• 18.8. M8. ADJUST KomVision Camera angle (KomVision Spec.)(Camera calibration and 12 m visibility check)
• 19. FIELD ASSEMBLY INSPECTION REPORT