Description
-
Model List:
- PW200-7H Wheeled Excavator
- PW220-7H Wheeled Excavator
- 1. FOREWORD
- 2. SAFETY INFORMATION
- 2.1. SAFETY MESSAGES
- 2.2. NOISE
- 2.3. VIBRATION
- 2.3.1. Guide to Reduce Vibration Levels on Machine
- 2.4. EMERGENCY STEERING
- 2.5. EMERGENCY BRAKING
- 3. INTRODUCTION
- 3.1. INTENDED USE
- 3.2. FEATURES
- 3.3. BREAKING IN YOUR NEW MACHINE
- 4. LOCATIONS OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 4.1. MACHINE SERIAL NO. PLATE POSITION
- 4.2. ENGINE SERIAL NO. PLATE POSITION
- 4.3. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 4.4. MACHINE SERIAL PLATES
- 4.4.1. STANDARD SERIAL PLATE
- 5. SAFETY
- 5.1. GENERAL PRECAUTIONS
- 5.2. PRECAUTION DURING OPERATION
- 5.2.1. BEFORE STARTING ENGINE
- 5.2.2. OPERATING MACHINE
- 5.2.3. TRANSPORTATION
- 5.2.4. BATTERY
- 5.2.5. TOWING
- 5.2.6. BUCKET WITH HOOK OR BUCKET LINK WITH LIFTING EYE
- 5.2.7. HANDLING OF FLUIDS
- 5.3. PRECAUTIONS FOR MAINTENANCE
- 5.3.1. BEFORE CARRYING OUT MAINTENANCE
- 5.3.2. DURING MAINTENANCE
- 5.4. POSITION FOR ATTACHING SAFETY LABELS
- 5.4.1. POSITION FOR ATTACHING SAFETY LABELS
- 5.5. LIFTING CAPACITY CHART PW2007H
- 5.5.1. ONE PIECE BOOM Lift capacity tables for 2.5 metre undercarriage
- 5.5.2. ONE PIECE BOOM Lift capacity tables for 2.75 metre undercarriage
- 5.5.3. TWO PIECE BOOM Lift capacity tables for 2.5 metre undercarriage
- 5.5.4. TWO PIECE BOOM Lift capacity tables for 2.75 metre undercarriage
- 5.6. LIFTING CAPACITY CHART PW2207H
- 5.6.1. ONE PIECE BOOM Lift capacity tables for 2.75 metre undercarriage and heavy duty counterweight.
- 5.6.2. ONE PIECE BOOM Lift capacity tables for 2.75 metre undercarriage
- 5.6.3. TWO PIECE BOOM Lift capacity tables for 2.75 metre undercarriage and heavy duty counterweight
- 5.6.4. TWO PIECE BOOM Lift capacity tables for 2.75 metre undercarriage
- 6. OPERATION
- 6.1. GENERAL VIEW
- 6.1.1. GENERAL VIEW OF MACHINE
- 6.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
- 6.2. EXPLANATION OF COMPONENTS
- 6.2.1. MACHINE MONITOR
- 6.2.2. BASIC CHECK ITEMS
- 6.3. SWITCHES
- 6.4. CONTROL LEVERS, PEDALS
- 6.4.1. FRONT WINDOW
- 6.4.2. EMERGENCY EXIT FROM OPERATORS CAB
- 6.4.3. CAP, COVER WITH LOCK
- 6.4.4. FUSE
- 6.4.5. LUGGAGE TRAY
- 6.4.6. ASHTRAY
- 6.4.7. CUP HOLDER
- 6.4.8. HOT AND COOL BOX
- 6.4.9. CAB RADIO
- 6.4.10. POWER PICKUP PORT
- 6.4.11. HANDLING AIR CONDITIONER
- 6.4.12. FUSIBLE LINK
- 6.4.13. CONTROLLER
- 6.4.14. TOOL BOX
- 6.4.15. REFUELLING PUMP
- 6.4.16. WARNING LAMPS
- 6.4.17. HANDLING ACCUMULATORS
- 6.5. OPERATION
- 6.5.1. CHECK BEFORE STARTING ENGINE
- 6.6. OPERATIONS AND CHECKS BEFORE STARTING ENGINE
- 6.6.1. STARTING ENGINE
- 6.6.2. MOVING MACHINE OFF
- 6.6.3. STEERING
- 6.6.4. TRAVELLING ON PUBLIC HIGHWAY
- 6.6.5. STOPPING PARKING
- 6.6.6. SWINGING (Slewing the upper carriage)
- 6.6.7. OPERATION OF WORK EQUIPMENT
- 6.6.8. WORKING MODE SELECTION
- 6.6.9. PROHIBITIONS FOR OPERATION
- 6.6.10. PRECAUTIONS FOR OPERATION
- 6.6.11. RECOMMENDATIONS FOR TRAVELLING
- 6.6.12. PRECAUTIONS WHEN TRAVELLING UP OR DOWN HILLS
- 6.6.13. HOW TO ESCAPE FROM MUD
- 6.6.14. WORK POSSIBLE USING HYDRAULIC EXCAVATOR
- 6.6.15. REPLACEMENT AND INVERSION OF BUCKET
- 6.6.16. STOPPING ENGINE
- 6.6.17. CHECK AFTER FINISHING WORK
- 6.7. CHECK AFTER STOPPING ENGINE
- 6.7.1. LOCKING
- 6.7.2. OVERLOAD WARNING DEVICE
- 6.7.3. HANDLING THE WHEELS
- 6.8. TRANSPORTATION
- 6.8.1. LOADING, UNLOADING WORK
- 6.8.2. PRECAUTIONS FOR LOADING
- 6.8.3. PRECAUTIONS FOR TRANSPORTATION
- 6.8.4. TRAVELLING POSTURE
- 6.9. COLD WEATHER OPERATION
- 6.9.1. PRECAUTIONS FOR LOW TEMPERATURE
- 6.9.2. PRECAUTIONS AFTER COMPLETION OF WORK
- 6.9.3. AFTER COLD WEATHER
- 6.10. LONGTERM STORAGE
- 6.10.1. BEFORE STORAGE
- 6.10.2. DURING STORAGE
- 6.10.3. AFTER STORAGE
- 6.10.4. STARTING MACHINE AFTER LONGTERM STORAGE
- 6.11. TROUBLESHOOTING
- 6.11.1. PHENOMENA THAT ARE NOT FAILURES
- 6.11.2. METHOD OF TOWING MACHINE
- 6.11.3. PRECAUTIONS ON PARTICULAR JOBSITES
- 6.11.4. DISCHARGED BATTERY
- 6.11.5. OTHER TROUBLE
- 7. MAINTENANCE
- 7.1. GUIDES TO MAINTENANCE
- 7.2. OUTLINE OF SERVICE
- 7.2.1. USE OF BIODEGRADEABLE OIL
- 7.2.2. OUTLINE OF OIL, FUEL, COOLANT
- 7.2.3. OUTLINE OF ELECTRIC SYSTEM
- 7.2.4. OUTLINE OF HYDRAULIC SYSTEM
- 7.3. WEAR PARTS LIST
- 7.4. USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- 7.4.1. PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS
- 7.5. USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE CONT.
- 7.6. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- 7.6.1. INTRODUCTION OF NECESSARY TOOLS
- 7.7. TIGHTENING TORQUE SPECIFICATIONS
- 7.7.1. TIGHTENING TORQUE LIST
- 7.8. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 7.8.1. SAFETY CRITICAL PARTS
- 7.9. MAINTENANCE SCHEDULE CHART
- 7.9.1. KEY TO LUBRICATION POINTS
- 7.10. SERVICE PROCEDURE
- 7.10.1. INITIAL 50 HOURS SERVICE
- 7.10.2. CHECK AND TIGHTEN WHEEL NUTS
- 7.10.3. INITIAL 250 HOURS SERVICE
- 7.10.4. WHEN REQUIRED
- 7.10.5. CHECKING COOLANT LEVEL
- 7.10.6. CHECK AND TIGHTEN WHEEL NUTS
- 7.10.7. CHECK ELECTRICAL INTAKE AIR HEATER
- 7.10.8. CHECK ALTERNATOR
- 7.10.9. REPLACE BUCKET SIDE CUTTERS
- 7.10.10. REPLACE BUCKET TEETH
- 7.10.11. ADJUST BUCKET CLEARANCE
- 7.10.12. CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
- 7.10.13. CHECK AND ADJUST AIR CONDITIONER
- 7.10.14. DRAIN ENGINE BREATHER OIL CATCHER
- 7.10.15. CHECK BEFORE STARTING
- 7.10.16. CHECK COOLANT LEVEL, ADD WATER
- 7.10.17. EVERY 50 HOURS
- 7.10.18. EVERY 100 HOURS SERVICE
- 7.10.19. EVERY 250 HOURS MAINTENANCE
- 7.10.20. EVERY 500 HOURS SERVICE
- 7.10.21. EVERY 1000 HOURS SERVICE
- 7.10.22. EVERY 2000 HOURS SERVICE
- 7.10.23. EVERY 4000 HOURS SERVICE
- 7.10.24. EVERY 5000 HOURS SERVICE
- 8. SPECIFICATIONS
- 8.1. SPECIFICATIONS
- 8.1.1. PIECE BOOM
- 8.1.2. PIECE BOOM
- 8.1.3. WORKING RANGE ONE PIECE BOOM
- 8.1.4. WORKING RANGE TWO PIECE BOOM
- 9. OPTIONS, ATTACHMENTS
- 9.1. GENERAL PRECAUTIONS
- 9.1.1. PRECAUTIONS RELATED TO SAFETY
- 9.2. PRECAUTIONS WHEN INSTALLING ATTACHMENTS
- 9.3. HANDLING BUCKET WITH HOOK
- 9.3.1. CHECKING FOR DAMAGE TO BUCKET WITH HOOK
- 9.3.2. PROHIBITED OPERATIONS
- 9.3.3. PRECAUTIONS DURING OPERATIONS
- 9.4. MACHINES READY FOR ATTACHMENTS
- 9.4.1. GENERAL LOCATIONS
- 9.4.2. HANDLING THE CLAMSHELL BUCKET
- 9.4.3. OPERATION
- 9.4.4. METHOD FOR RELEASING PRESSURE IN CONTROL CIRCUIT OF MACHINES EQUIPPED WITH ACCUMULATOR
- 9.4.5. LONGTERM STORAGE
- 9.5. INTRODUCTION OF ATTACHMENTS AND EXTENDING MACHINE SERVICE LIFE
- 9.5.1. HYDRAULIC BREAKER
- 9.5.2. POWER RIPPER
- 9.5.3. FORK GRAB
- 9.5.4. GRAPPLE BUCKET
- 9.5.5. SCRAP GRAPPLE
- 9.5.6. CRUSHER SMASHER
- 9.5.7. HYDRAULIC PILE DRIVER
- 9.5.8. HYDRAULIC EXCAVATOR WITH MULTIPURPOSE CRANE
- 10. INDEX
There are no reviews yet.