Description
-
Model List:
- WA320-7 Wheel Loader
- 1. CEAM027401 WA3207 S/N A36001 and UP
- 1.1. FOREWORD
- 1.1.1. BEFORE READING THIS MANUAL
- 1.1.2. SAFETY INFORMATION
- 1.1.3. INTRODUCTION
- 1.1.3.1. USE OF MACHINE
- 1.1.3.2. DIRECTIONS OF MACHINE
- 1.1.3.3. VISIBILITY FROM OPERATORS SEAT
- 1.1.4. PRODUCT INFORMATION
- 1.1.4.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
- 1.1.4.2. EPA REGULATIONS, ENGINE NUMBER PLATE
- 1.1.4.3. SERVICE METER LOCATION
- 1.1.4.4. YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
- 1.1.5. CONTENTS
- 1.2. SAFETY
- 1.2.1. SAFETY
- 1.2.2. SAFETY LABELS
- 1.2.2.1. LOCATION OF SAFETY LABELS
- 1.2.2.2. SAFETY LABELS
- 1.2.3. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
- 1.2.3.1. PRECAUTIONS BEFORE STARTING OPERATION
- 1.2.3.2. PREPARATIONS FOR SAFE OPERATION
- 1.2.3.3. FIRE PREVENTION
- 1.2.3.4. PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
- 1.2.3.5. DO NOT GET CAUGHT IN WORK EQUIPMENT
- 1.2.3.6. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
- 1.2.3.7. UNAUTHORIZED MODIFICATION
- 1.2.3.8. PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
- 1.2.3.9. PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
- 1.2.4. PRECAUTIONS FOR OPERATION
- 1.2.4.1. PRECAUTIONS FOR JOBSITE
- 1.2.4.2. STARTING ENGINE
- 1.2.4.3. OPERATION
- 1.2.4.4. TRANSPORTATION
- 1.2.4.5. TOWING
- 1.2.5. PRECAUTIONS FOR MAINTENANCE
- 1.2.5.1. PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
- 1.2.5.2. PRECAUTIONS FOR INSPECTION AND MAINTENANCE
- 1.2.5.3. TIRES
- 1.3. OPERATION
- 1.3.1. GENERAL VIEW
- 1.3.1.1. GENERAL VIEW OF MACHINE
- 1.3.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
- 1.3.2. EXPLANATION OF COMPONENTS
- 1.3.2.1. MACHINE MONITOR
- 1.3.2.2. SWITCHES
- 1.3.2.3. CONTROL LEVERS AND PEDALS
- 1.3.2.4. CAPS AND COVERS WITH LOCK
- 1.3.2.5. ASHTRAY
- 1.3.2.6. FRAME LOCK BAR
- 1.3.2.7. TOWING PIN
- 1.3.2.8. GREASE PUMP HOLDER
- 1.3.2.9. BATTERY DISCONNECT SWITCH
- 1.3.2.10. SYSTEM OPERATING LAMP
- 1.3.2.11. BACKUP ALARM
- 1.3.2.12. OPEN AND CLOSE CAB DOOR
- 1.3.2.13. FUSE
- 1.3.2.14. SLOWBLOW FUSE
- 1.3.2.15. AUXILIARY ELECTRIC POWER
- 1.3.2.16. HANDLING RADIO
- 1.3.2.17. HANDLING AUTO AIR CONDITIONER
- 1.3.2.18. HANDLING FRONT WIPER
- 1.3.2.19. HANDLING REAR VIEW MONITOR
- 1.3.2.20. HANDLING Komatsu Diesel Particulate Filter (KDPF)
- 1.3.2.21. HANDLING Komatsu Closed Crankcase Ventilation (KCCV)
- 1.3.2.22. HANDLING MACHINES EQUIPPED WITH KOMTRAX
- 1.3.3. MACHINE OPERATIONS AND CONTROLS
- 1.3.3.1. CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
- 1.3.3.2. STARTING ENGINE
- 1.3.3.3. CHECKS AFTER STARTING ENGINE
- 1.3.3.4. STOPPING ENGINE
- 1.3.3.5. MACHINE OPERATION
- 1.3.3.6. STEERING MACHINE
- 1.3.3.7. WORK EQUIPMENT CONTROLS AND OPERATIONS
- 1.3.3.8. HANDLING HYDRAULIC TYPE QUICK COUPLER
- 1.3.3.9. RECOMMENDED APPLICATIONS
- 1.3.3.10. RULES FOR OPERATION
- 1.3.3.11. ADJUST WORK EQUIPMENT POSTURE
- 1.3.3.12. PARKING MACHINE
- 1.3.3.13. CHECK AFTER FINISHING WORK
- 1.3.3.14. LOCKING
- 1.3.3.15. HANDLING TIRES
- 1.3.4. TRANSPORTATION
- 1.3.4.1. TRANSPORTATION PROCEDURE
- 1.3.4.2. LOADING AND UNLOADING WITH TRAILER
- 1.3.4.3. LIFTING MACHINE
- 1.3.5. COLD WEATHER OPERATION
- 1.3.5.1. COLD WEATHER OPERATION INFORMATION
- 1.3.5.2. AFTER DAILY WORK COMPLETION
- 1.3.5.3. IN COLD AREAS
- 1.3.5.4. AFTER COLD WEATHER SEASON
- 1.3.6. LONGTERM STORAGE
- 1.3.6.1. BEFORE STORAGE
- 1.3.6.2. DURING STORAGE
- 1.3.6.3. AFTER STORAGE
- 1.3.6.4. STARTING MACHINE AFTER LONGTERM STORAGE
- 1.3.7. TROUBLES AND ACTIONS
- 1.3.7.1. RUNNING OUT OF FUEL
- 1.3.7.2. TOWING MACHINE
- 1.3.7.3. DISCHARGED BATTERY
- 1.3.7.4. OTHER TROUBLE
- 1.4. MAINTENANCE
- 1.4.1. RULES FOR MAINTENANCE
- 1.4.1.1. SERVICE METER READING
- 1.4.1.2. KOMATSU GENUINE REPLACEMENT PARTS
- 1.4.1.3. KOMATSU GENUINE LUBRICANTS
- 1.4.1.4. ALWAYS USE CLEAN WASHER FLUID
- 1.4.1.5. FRESH AND CLEAN LUBRICANTS
- 1.4.1.6. CHECK DRAINED OIL AND USED FILTER
- 1.4.1.7. CAUTION FOR REFILLING OIL OR FUEL
- 1.4.1.8. WELDING INSTRUCTIONS
- 1.4.1.9. DO NOT DROP THINGS INSIDE MACHINE
- 1.4.1.10. PRECAUTIONS FOR KDPF
- 1.4.1.11. DUSTY JOBSITES
- 1.4.1.12. AVOID MIXING OIL
- 1.4.1.13. LOCKING INSPECTION COVERS
- 1.4.1.14. BLEEDING AIR FROM HYDRAULIC CIRCUIT
- 1.4.1.15. PRECAUTIONS WHEN INSTALLING HYDRAULIC HOSES
- 1.4.1.16. CHECKS AFTER INSPECTION AND MAINTENANCE
- 1.4.1.17. FUEL AND LUBRICANTS TO MATCH THE AMBIENT TEMPERATURE
- 1.4.1.18. CLOSE ENGINE SIDE COVER SECURELY
- 1.4.2. OUTLINE OF MAINTENANCE
- 1.4.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
- 1.4.2.2. HANDLING ELECTRICAL COMPONENTS
- 1.4.3. STANDARD TIGHTENING TORQUE FOR BOLTS AND NUTS
- 1.4.3.1. TIGHTENING TORQUE LIST
- 1.4.4. MAINTENANCE SCHEDULE
- 1.4.4.1. MAINTENANCE SCHEDULE TABLE
- 1.4.5. MAINTENANCE PROCEDURE
- 1.4.5.1. EVERY 10 HOURS MAINTENANCE (ONLY FOR THE FIRST 100 HOURS)
- 1.4.5.2. INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
- 1.4.5.3. INITIAL 1000 HOURS MAINTENANCE (ONLY AFTER THE FIRST 1000 HOURS)
- 1.4.5.4. WHEN REQUIRED
- 1.4.5.5. CHECKS BEFORE STARTING
- 1.4.5.6. EVERY 50 HOURS MAINTENANCE
- 1.4.5.7. EVERY 100 HOURS MAINTENANCE
- 1.4.5.8. EVERY 250 HOURS MAINTENANCE
- 1.4.5.9. EVERY 500 HOURS MAINTENANCE
- 1.4.5.10. EVERY 1000 HOURS MAINTENANCE
- 1.4.5.11. EVERY 2000 HOURS MAINTENANCE
- 1.4.5.12. EVERY 4000 HOURS MAINTENANCE
- 1.4.5.13. EVERY 4500 HOURS MAINTENANCE
- 1.4.5.14. EVERY 8000 HOURS MAINTENANCE
- 1.5. SPECIFICATIONS
- 1.5.1. SPECIFICATIONS
- 1.6. ATTACHMENTS AND OPTIONS
- 1.6.1. TIRE AND BUCKET SELECTION
- 1.6.2. HANDLING FORK
- 1.6.2.1. EXPLANATION OF COMPONENTS
- 1.6.2.2. MACHINE OPERATIONS AND CONTROLS
- 1.6.3. PCS (Proportional Control Switch)
- 1.6.3.1. DISPLAY OF LIQUID CRYSTAL UNIT
- 1.6.3.2. SETTING METHOD OF PCS
- 1.7. REPLACEMENT PARTS
- 1.7.1. SAFETY CRITICAL PARTS
- 1.7.1.1. SAFETY CRITICAL PARTS LIST
- 1.7.2. CONSUMABLE PARTS
- 1.7.2.1. CONSUMABLE PARTS LIST
- 1.7.3. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
- 1.7.3.1. LUBRICATION CHART
- 1.7.3.2. LUBRICANTS TO MATCH THE AMBIENT TEMPERATURE AND RECOMMENDED GENUINE LUBRICANTS
- 1.7.3.3. RECOMMENDED BRANDS AND QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
- 1.8. INDEX
There are no reviews yet.