Komatsu WA380-3 Avance Wheel Loader Operation and Maintenance Manual OMEW380000

Description

• Model List:
  • WA380-3 Avance Wheel Loader

• 1. COVER
• 2. FORWARD
• 3. SAFETY INFORMATION
• 4. INTRODUCTION
• 5. LOCATION OF PLATESTABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
• 6. CONTENTS
• 7. SAFETY
• 7.1. GENERAL PRECAUTIONS
• 7.2. PRECAUTIONS DURING OPERATION
• 7.2.1. BEFORE STARTING ENGINE
• 7.2.2. OPERATING MACHINE
• 7.2.3. TRANSPORTATION
• 7.2.4. BATTERY
• 7.2.5. TOWING
• 7.3. PRECAUTIONS FOR MAINTENANCE
• 7.3.1. BEFORE CARRYING OUT MAINTENANCE
• 7.3.2. DURING MAINTENANCE
• 7.3.3. TIRE
• 7.4. POSITION FOR ATTACHING SAFETY LABELS
• 7.4.1. POSITION FOR ATTACHING SAFETY LABELS
• 8. OPERATION
• 8.1. GENERAL VIEW
• 8.1.1. GENERAL VIEW OF MACHINE
• 9. EXPLANATION OF COMPONENTS
• 9.1. METER,LAMPS
• 9.2. SWITCHES
• 9.3. CONTORL LEVERS,PEDALS
• 9.4. CAP WITH LOCK
• 9.5. SAFETY BAR
• 9.6. TOWING PIN
• 9.7. GREASE PUMP
• 9.8. BACKUP ALARM
• 9.9. FUSE
• 9.10. SLOWBLOW FUSE
• 10. OPERATION
• 10.1. CHECK BEFORE STARTING ENGINE
• 10.2. STARTING ENGINE
• 10.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
• 10.4. MOVING MACHINE OFF
• 10.5. CHANGING GEAR SPEED
• 10.6. CHANGING DIRECTION
• 10.7. TURING
• 10.8. STOPPING MACHINE
• 10.9. OPERATION OF WORK EQUIPMENT
• 10.10. WORK POSSIBLE USING WHEEL LOADER
• 10.11. PRECAUTIONS FOR OPERATION
• 10.12. ADJUSTING WORK EQUIPMENT POSTURE
• 10.13. PARKING MACHINE
• 10.14. CHECKS AFTER COMPLETION OF OPERATION
• 10.15. STOPPING ENGINE NOTICE
• 10.16. CHECEK AFTER STOPPING ENGINE
• 10.17. LOCKING
• 10.18. HANDLING THE TIRES
• 11. TRANSPORTATION
• 11.1. LOADING,UNLOADING WORK
• 11.2. PRECAUTIONS FOR LOADING
• 11.3. PRECAUTIONS FOR TRANSPORTATION
• 12. COLD WEATHER OPERATION
• 12.1. PRECAUTIONS FOR LOW TEMPERATURE
• 12.2. PRECAUTIONS AFTER COMPLETION OF WORK
• 12.3. AFTER COLD WEATHER
• 13. LONGTERM STORAGE
• 13.1. BEFORE STORAGE
• 13.2. DURING STORAGE
• 13.3. AFTER STORAGE
• 14. TROUBLESHOOTING
• 14.1. WHEN MACHINE RUNS OUT OF FUEL
• 14.2. TOWING THE MACHINE
• 14.3. IF BATTERY IS DISCHARGED
• 14.4. OTHER TROUBLE
• 15. MAINTENANCE
• 15.1. GUIDES TO MAINTENANCE
• 15.2. OUTLINES OF SERVICE
• 15.2.1. OUTLINE OF OIL,FUEL,COOLANT
• 15.2.2. OUTLINE OF ELECTRIC SYSTEM
• 15.3. WEAR PARTS LIST
• 15.4. USE OF FUEL,COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
• 15.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
• 15.5.1. INTRODUCTION OF NECESSARY TOOLS
• 15.5.2. TORQUE LIST
• 15.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
• 15.7. MAINTENANCE SCHEDULE CHART
• 15.7.1. MAINTENANCE SCHEDULE CHART
• 15.8. SERVICE PROCEDURE
• 15.8.1. INITIAL 250 HOURS SERVICE
• 15.8.2. WHEN REQUIRED
• 15.8.3. CHECK BEFORE STARTION
• 15.8.4. EVERY 50 HOURS SERVICE
• 15.8.5. EVERY 100 HOURS SERVICE
• 15.8.6. EVERY 250 HOURS SERVICE
• 15.8.7. EVERY 500 HOURS SERVICE
• 15.8.8. EVERY 1000 HOURS SERVICE
• 15.8.9. EVERY 2000 HOURS SERVICE
• 15.8.10. EVERY 4000 HOURS SERVICE
• 16. SPECIFICATIONS
• 16.1. SPECIFICATIONS
• 17. OPTIONS,ATTACHMENTS
• 17.1. AIR CONDITIONER
• 17.1.1. GENERAL LOCATIONS AND FUNCTION OF CONTROL PANEL
• 17.1.2. METHOD OF OPERATION
• 18. PROPOSAL