Description
-
Model List:
- WH609-1 Telescopic Handler
- WH613-1 Telescopic Handler
- WH713-1 Telescopic Handler
- WH714-1 Telescopic Handler
- WH714H-1 Telescopic Handler
- WH716-1 Telescopic Handler
- 1. CONTENTS
- 2. REVISED PAGES
- 3. SAFETY
- 4. FOREWORD
- 5. HOW TO READ THE SHOP MANUAL
- 6. HOISTING INSTRUCTIONS
- 7. STANDARD TIGHTENING TORQUE
- 8. COATING MATERIALS
- 9. ELECTRIC
- 10. WEIGHT TABLE
- 11. TABLE OF OIL AND COOLANT QUANTITIES
- 12. CONVERSION TABLE
- 13. STRUCTURE AND FUNCTION
- 13.1. ENGINETRANSMISSION COUPLING
- 13.2. STEERING SYSTEM (4WS)
- 13.3. STEERING UNIT
- 13.4. HYDRAULIC DIAGRAM
- 13.5. HYDRAULIC PUMP
- 13.6. CONTROL VALVE
- 13.7. PPC VALVE
- 13.8. SOLENOID VALVES
- 13.9. SAFETY VALVES
- 13.10. CYLINDERS
- 13.11. AIR CONDITIONING SYSTEM
- 13.12. CLIMATE CONTROL SYSTEM OPERATION
- 13.13. ELECTRICAL DIAGRAMS
- 14. TESTING AND ADJUSTMENTS
- 14.1. STANDARD SPECIFICATIONS
- 14.2. INTRODUCTION
- 14.3. VALVE LASH ADJUSTMENT
- 14.4. CHECKING ENGINE SPEED
- 14.5. TENSIONING THE AIR CONDITIONER COMPRESSOR BELT.
- 14.6. ADJUSTING ACCELERATOR CABLE LENGTH
- 14.7. ADJUSTING BRAKE PEDAL TRAVEL AND POSITIONING THE STOP LAMP MICROSWITCHES
- 14.8. ADJUSTING THE PARKING BRAKES
- 14.9. BLEEDING AIR FROM CIRCUITS
- 14.10. PREPARING THE MACHINE READY FOR HYDRAULIC PRESSURE CHECK AND CALIBRATION
- 14.11. CHECKING AND CALIBRATING WORK EQUIPMENT HYDRAULIC PRESSURES
- 14.12. CALIBRATING THE PRESSURE OF THE STEERING SYSTEM
- 14.13. INSPECTING THE OPERATION OF THE UNLOADING VALVE
- 14.14. CHECKING AND CALIBRATING THE DR VALVE (PUMP FLOW VARIATION)
- 14.15. CHECKING THE DYNAMIC PUMP DP VALUE
- 14.16. CHECKING PUMP FLOW
- 14.17. BRAKE SYSTEM CHECKS
- 14.18. TRANSMISSION (POWER SHIFT) CHECKS
- 14.19. TRANSMISSION ASSEMBLY PRESSURE CHECKS
- 14.20. CHECKING THE SPEED OF THE TRANSMISSION SHAFTS RESPONSIBLE FOR TRANSLATION (CARDAN SHAFTS)
- 14.21. LEVEL CALIBRATION
- 14.22. CHECKING LOAD CELL CALIBRATION
- 14.23. CALIBRATING THE OVERTURN PREVENTION SYSTEM (SAR)
- 14.24. CHECKING WEIGHT PERCENTAGE ON REAR AXLE
- 14.25. CHECKING SHOE CLEARANCE
- 14.26. CHECKING BOOM SIDE ALIGNMENT
- 14.27. BOOM CHAINS
- 14.28. CHAIN TENSIONING
- 14.29. CHECKING FOR BLOWBY
- 14.30. ANALYSIS OF THE CAUSES RESPONSIBLE FOR HYDRAULIC DRIFT
- 14.31. EQUALIZING STABILIZER SPEED
- 14.32. AIR CONDITIONING SYSTEM MAINTENANCE
- 14.33. CHECKING THE A/C SYSTEMS OPERATING TEMPERATURE
- 15. REMOVAL AND INSTALLATION
- 15.1. HOW TO READ THE MANUAL
- 15.2. PRECAUTIONS TO BE TAKEN WHEN WORKING
- 15.3. TURBOCOMPRESSOR (only if equipped)
- 15.4. GENERATOR FAN BELT
- 15.5. RADIATOREXCHANGER ASSEMBLY
- 15.6. MUFFLER
- 15.7. BATTERY BATTERY TRAY
- 15.8. COMPLETE ENGINE SHIFT ASSEMBLY
- 15.9. ENGINETRANSMISSION
- 15.10. CONTROL VALVE ASSEMBLY
- 15.11. BRACKET CONTROL, EQUIPMENT LOCK, AND FRAME LEVELLING SOLENOID VALVES
- 15.12. AIR CONDITIONER COMPRESSOR (only if equipped)
- 15.13. AIR CONDITIONER COMPRESSOR BELT
- 15.14. SERVOCONTROL FEED VALVE
- 15.15. STEERING SELECTION SOLENOID VALVE ASSEMBLY
- 15.16. FRONT AXLE
- 15.17. REAR AXLE
- 15.18. TELESCOPIC BOOM
- 15.19. LIFT AND OFFSET CYLINDERS
- 15.20. INTERMEDIATE AND TOP BOOM
- 15.21. EXTENSION CYLINDER
- 15.22. BOOM SLIDING SHOES
- 15.23. EXTENSION AND RETRACTION CHAINS (Versions with 3section boom)
- 15.24. CHAIN RETURN PULLEY PINS AND BUSHINGS
- 15.25. ENGINE LINE CENTRE
- 15.26. ACCELERATOR CABLE
- 15.27. SHIFTREVERSING GEAR LEVER ASSEMBLY
- 15.28. STEERING COLUMN SWITCH UNIT DIPSWITCH
- 15.29. STEERING UNIT
- 15.30. STEERING COLUMN
- 15.31. PARKING BRAKE CABLE
- 15.32. DASH / INSTRUMENT PANEL
- 15.33. CONTROL PANEL
- 15.34. FUSE AND RELAY CENTRE
- 15.35. PROPELLER SHAFT
- 15.36. FUEL TANK
- 15.37. HYDRAULIC OIL TANK
- 15.38. FRAME LEVELLING CYLINDER
- 15.39. FRAME SWING LOCKING ROD (WH609 and WH613 only)
- 15.40. AXLE LOCKING CYLINDER
- 15.41. STABILIZER CYLINDERS (If equipped)
- 15.42. EQUIPMENT HOLDER
- 15.43. EQUIPMENT MOTION CYLINDER
- 15.44. CYLINDERS
- 15.45. EQUIPMENT QUICKLOCK ASSEMBLY
- 15.46. AIR CONDITIONER FANS
- 15.47. AIR CONDITIONER CONDENSER ASSEMBLY
- 15.48. DEHUMIDIFYING FILTER
- 15.49. PAIR CONDITIONING SYSTEM PRESSURE SWITCH
- 15.51. TRANSMISSION
- 15.52. AXLES
- 16. OTHERS
- 16.1. CAB WIRING
- 16.2. ELECTRICAL DIAGRAM
Reviews
There are no reviews yet.