Linde 033-01 – M25 EX Production site Proplan Operating Instructions

Description

• Model List:
  • M25 EX

• 1. Hand pallet truckM25 Ex
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your industrial truck
• 1.2.2. CE labelling
• 1.2.3. Legal requirements for marketing
• 1.2.4. Intended use
• 1.2.5. Impermissible use
• 1.2.6. Basic information on explosion protection
• 1.2.7. Symbols used
• 1.2.8. Taking delivery of the industrial truck
• 1.2.9. Documentation scope
• 1.3. Safety
• 1.3.1. Explosion protection safety guidelines
• 1.3.2. Protective equipment for explosion protection
• 1.3.3. Residual risks
• 1.3.4. Competent person
• 1.4. Overviews
• 1.4.1. Overview
• 1.4.2. Overview
• 1.4.3. Nameplate
• 1.5. Operation
• 1.5.1. Before initial commissioning
• 1.5.1.1. Fitting the tiller
• 1.5.2. Preshift checks
• 1.5.3. Steering
• 1.5.4. Lifting
• 1.5.4.1. Lifting system
• 1.5.4.2. Lifting system controls
• 1.5.5. Brakes
• 1.5.5.1. Braking the industrial truck
• 1.5.5.2. Emergency stop
• 1.5.5.3. Parking brake on the HTP 10 XM (special equipment)
• 1.5.6. Handling loads
• 1.5.6.1. Safety regulations for handling loads
• 1.5.6.2. Before the load pickup
• 1.5.6.3. Taking up loading units
• 1.5.6.4. Taking up load
• 1.5.6.5. Driving onto lifts
• 1.5.6.6. Driving on loading bridges
• 1.5.6.7. Parking the industrial truck securely
• 1.5.7. Cold store application
• 1.6. Service and maintenance
• 1.6.1. Service plan
• 1.6.2. Jacking up
• 1.6.3. Cleaning the industrial truck
• 1.6.4. Service plan as required
• 1.6.4.1. Servicing the steering rollers and load castors
• 1.6.4.2. Checking the leak resistance
• 1.6.4.3. Servicing the lifting system
• 1.6.4.4. Adjusting the lowering device
• 1.6.5. Service plan after six months
• 1.6.5.1. Checking the forks
• 1.6.5.2. Checking the hydraulic oil level and checking the hydraulic system for leak tightness
• 1.7. Technical data
• 1.7.1. M25 dimensions
• 1.7.2. Technical datasheet
• 1.8. Spare parts list
• 1.8.1. Spare parts list