Linde 1133-03 – MT15, MT16, MT20 Operating Instructions SN 09.19 and up

Description

• Model List:
  • MT15
  • MT16
  • MT20

• 1. series Electric Pallet TruckModel MT18
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Scope
• 1.2.2. Obligations of the Equipment Owner
• 1.2.3. Operator Responsibilities
• 1.2.4. Proper use
• 1.2.5. Hazard messages
• 1.3. Safety
• 1.3.1. Before Operation
• 1.3.2. Operator daily checklist
• 1.3.3. Operating Position
• 1.3.4. Travel
• 1.3.5. Inclines, Ramps, Docks, Elevators
• 1.3.6. Parking
• 1.3.7. Battery Safety
• 1.3.8. Safety During Maintenance
• 1.3.8.1. Personnel Qualifications
• 1.3.8.2. Hazardous Substances
• 1.3.9. Operator Warning Decals
• 1.3.9.1. Data plate
• 1.3.9.2. No riding decal
• 1.3.9.3. Trained operator warning decal
• 1.3.9.4. Test or service warning decal
• 1.4. Overview
• 1.4.1. Technical Description
• 1.4.2. Truck Components
• 1.4.3. Controls
• 1.4.4. Display Unit
• 1.4.5. Data Plate
• 1.4.6. Decal and Data Plate Location
• 1.4.7. Definition of Directions
• 1.5. Operation
• 1.5.1. Unloading and Preparing a New Truck for Operation
• 1.5.2. Turning the Truck On and Off
• 1.5.3. Driving
• 1.5.4. Braking
• 1.5.5. Emergency Stop Button
• 1.5.6. Steering
• 1.5.7. Horn
• 1.5.8. Raising and Lowering the Forks
• 1.5.9. Battery Removal and Installation
• 1.5.10. Charging the Battery
• 1.5.11. Hoisting the Truck
• 1.6. Maintenance
• 1.6.1. Personnel Qualifications
• 1.6.2. Cleaning the Truck
• 1.6.3. Daily Inspection
• 1.6.3.1. Daily Inspection Overview
• 1.6.4. Routine Lubrication and Inspection
• 1.6.4.1. Routine Lubrication and Inspection Intervals
• 1.6.4.2. Check Drive Wheel and Fasteners
• 1.6.4.3. Lubrication Points
• 1.6.5. Scheduled Maintenance
• 1.6.5.1. General Maintenance Information
• 1.6.5.2. Maintenance Schedule
• 1.6.6. Fluids and Lubricants
• 1.6.6.1. Lubricant Specifications and Capacities
• 1.6.7. Troubleshooting
• 1.6.7.1. Fuses
• 1.6.7.2. Fault Codes
• 1.7. Technical Data
• 1.7.1. Specifications
• 2. Pallet truckMT15EMEA
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Introduction
• 2.2.2. General information
• 2.2.3. Conformity marking
• 2.2.4. Declaration that reflects the content of the declaration of conformity
• 2.2.5. Intended use of the trucks
• 2.2.6. Improper use
• 2.2.7. Additional information
• 2.2.8. Description of use and climatic conditions
• 2.2.9. Symbols used
• 2.2.10. Disposing of components and batteries
• 2.2.11. Technical description
• 2.3. Safety
• 2.3.1. Safety guidelines
• 2.3.2. Residual risks
• 2.3.3. Stability
• 2.3.4. Handling consumables
• 2.3.5. EMC Electromagnetic compatibility
• 2.3.6. Regulations
• 2.3.7. Competent person
• 2.4. Views
• 2.4.1. Overview
• 2.4.2. Display element
• 2.4.3. Labels
• 2.4.4. Nameplate
• 2.5. Operation
• 2.5.1. Intended use of the trucks
• 2.5.2. Checks before first commissioning
• 2.5.3. Breakin period precautions
• 2.5.4. Key switch
• 2.5.5. Emergency off switch
• 2.5.6. Driving the truck
• 2.5.7. Using the truck on ramps
• 2.5.8. Picking up and storing goods
• 2.5.9. Truck parking
• 2.5.10. Hoisting
• 2.5.11. Truck transport
• 2.6. Battery use and maintenance
• 2.6.1. Precautions for safely working on the battery
• 2.6.2. Disassembling and installing the battery
• 2.6.3. Servicing the battery
• 2.6.4. Battery waste disposal
• 2.7. Maintenance
• 2.7.1. Operational safety and environmental protection
• 2.7.2. Repairs and maintenance safety regulations
• 2.7.3. Calendar of maintenance operations
• 2.7.4. hour service plan
• 2.7.5. Lubrication maintenance schematic view
• 2.7.6. Servicing
• 2.7.7. Decommissioning and storing the truck
• 2.7.8. Safety checks to be performed at regular intervals and following any abnormal situations
• 2.7.9. Equipment scrapping and disposal method
• 2.8. Troubleshooting
• 2.8.1. Troubleshooting
• 2.9. Lithiumion battery use and maintenance
• 2.9.1. Battery introduction and instructions
• 2.10. Technical data
• 2.10.1. Technical datasheet
• 2.10.2. Ecodesign requirements for electric motors and variable speed drives
• 3. Pallet truckMT16, MT20
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Introduction
• 3.2.2. Intended use
• 3.2.3. Improper use
• 3.2.4. Additional information
• 3.2.5. Description of use and climatic conditions
• 3.2.6. Symbols used
• 3.2.7. Technical description
• 3.3. Safety
• 3.3.1. Safety guidelines
• 3.3.2. Residual risks
• 3.3.3. Stability
• 3.3.4. Handling consumables
• 3.3.5. EMC Electromagnetic compatibility
• 3.3.6. Regulations
• 3.3.7. Competent person
• 3.4. Views
• 3.4.1. Overview
• 3.4.2. Display element
• 3.4.3. Identification plates
• 3.5. Operation
• 3.5.1. Intended use of the trucks
• 3.5.2. Checks before use
• 3.5.3. Breakin period precautions
• 3.5.4. Key switch
• 3.5.5. Emergency off switch
• 3.5.6. Driving the truck
• 3.5.7. Using the truck on ramps
• 3.5.8. Picking up and storing goods
• 3.5.9. Truck parking
• 3.5.10. Truck transport
• 3.6. Battery use and maintenance
• 3.6.1. Precautions for safely working on the battery
• 3.6.2. Disassembling and installing the battery
• 3.6.3. Servicing the battery
• 3.6.4. Battery waste disposal
• 3.7. Maintenance
• 3.7.1. Operational safety and environmental protection
• 3.7.2. Repairs and maintenance safety regulations
• 3.7.3. Calendar of maintenance operations
• 3.7.4. hour service plan
• 3.7.5. Lubrication maintenance schematic view
• 3.7.6. Decommissioning and storing the truck
• 3.7.7. Safety checks to be performed at regular intervals and following any abnormal situations
• 3.7.8. Equipment scrapping and disposal method
• 3.8. Troubleshooting
• 3.8.1. Troubleshooting
• 3.9. Lithiumion battery use and maintenance
• 3.9.1. Battery introduction and instructions
• 3.9.2. Charging
• 3.10. Technical data
• 3.10.1. Technical datasheet
• 3.10.2. Ecodesign requirements for electric motors and variable speed drives