Linde 116-03 – R14X, R16X, R17X, R17XHD Operating Instructions SN 01.10 and up

Description

• Model List:
  • R14X
  • R16X
  • R17X
  • R17XHD

• 1. Electric reach truckR14X03, R16X03, R17X03, R17XHD03
• 1.1. Table of content
• 1.2. Introduction and general description
• 1.2.1. Introduction
• 1.2.2. EC declaration of conformity
• 1.2.3. General description
• 1.3. Safety
• 1.3.1. Operator safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. In the event of tipover
• 1.3.5. Noise emission levels
• 1.3.6. Frequency characteristic for human body vibrations
• 1.4. Getting to know the truck
• 1.4.1. Location of identification plates and labels
• 1.4.2. Truck type.capacity plate
• 1.4.3. General view of truck
• 1.4.4. Operating controls and indicators
• 1.4.5. Operators display
• 1.4.6. Lift height indicator (LHI)
• 1.4.7. Magnetic fork position indicators
• 1.4.8. Definition of direction of travel
• 1.5. Operation
• 1.5.1. Runningin instructions
• 1.5.2. Preshift checks
• 1.5.3. The battery
• 1.5.4. Operator adjustments
• 1.5.5. Braking twin pedal
• 1.5.6. Braking single pedal
• 1.5.7. Driving twin pedal
• 1.5.8. Driving single pedal
• 1.5.9. Travelling on an incline
• 1.5.10. Operating the mast and attachments (with two joystick control)
• 1.5.11. Operating the mast and attachments (with three joystick control)
• 1.5.12. Operating the mast and attachments (with four joystick control)
• 1.5.13. Handling loads
• 1.5.14. Before leaving the truck
• 1.5.15. Steering (Option)
• 1.5.16. Opposite direction steering (Option)
• 1.5.17. Height preselector LPS (option)
• 1.5.18. Operator code entry (Option)
• 1.5.19. Data Logger (Option)
• 1.5.20. Truck data management LFM (Option)
• 1.5.21. Cold store cabin
• 1.5.22. Exterior lights (option)
• 1.6. Maintenance
• 1.6.1. Maintenance safety guidelines
• 1.6.2. Report of Thorough Examination
• 1.6.3. Covers and cowlings
• 1.6.4. Fuses
• 1.6.5. Emergency lower
• 1.6.6. Emergency steering and parking brake release
• 1.6.7. Slinging the truck
• 1.6.8. Securing for transportation
• 1.6.9. Jacking the truck
• 1.6.10. Towing procedure
• 1.6.11. Mast unit
• 1.6.12. Recommended lubricants
• 1.6.13. Inspection and maintenance data
• 1.6.14. Inspection and maintenance schedule
• 1.6.15. Inspection and maintenance as required
• 1.6.16. hr Inspection and maintenance (250 hr cold store)
• 1.6.17. hr Inspection and maintenance (1000 hr cold store)
• 1.6.18. hr Inspection and maintenance (2500 hr cold store)
• 1.6.19. hr Inspection and maintenance (5000 hr cold store)
• 1.6.20. Taking the truck out of operation
• 1.6.21. Decommissioning the truck
• 1.7. Technical data
• 1.7.1. Dimensions
• 1.7.2. Technical data 1.4 tonne capacity
• 1.7.3. Technical data 1.6 tonne capacity
• 1.7.4. Technical data 1.7 tonne capacity
• 1.7.5. Technical data 1.7 tonne capacity (heavy duty)
• 1.7.6. Battery data
• 1.7.7. Mast variations
• 2. Electric reach truckR14X03, R16X03, R17X03, R17XHD03
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Your industrial truck
• 2.2.2. General information
• 2.2.3. Conformity marking
• 2.2.4. Declaration that reflects the content of the declaration of conformity
• 2.2.5. Intended use
• 2.2.6. Description of use and climatic conditions
• 2.2.7. Improper use
• 2.2.8. Symbols used
• 2.2.9. Taking delivery of the industrial truck
• 2.2.10. Customised options
• 2.2.11. Disposing of components and batteries
• 2.3. Safety
• 2.3.1. Safety guidelines
• 2.3.2. Handling consumables
• 2.3.3. Residual risks
• 2.3.4. Stability
• 2.3.5. Inclines, ramps, docks and lifts
• 2.3.6. In the event of tipover
• 2.3.7. Operating company
• 2.3.8. Competent person
• 2.3.9. Periodic safety inspection
• 2.4. Overview
• 2.4.1. Location of identification plates and labels
• 2.4.2. Truck type.capacity plate
• 2.4.3. General view of truck
• 2.4.4. Operating controls and indicators
• 2.4.5. Operators display
• 2.4.6. Lift height indicator (LHI)
• 2.4.7. Magnetic fork position indicators
• 2.4.8. Definition of direction of travel
• 2.5. Operation
• 2.5.1. General description
• 2.5.2. Runningin instructions
• 2.5.3. Preoperation checks
• 2.5.4. Drivers compartment
• 2.5.5. Brakes parking brake
• 2.5.6. Operation
• 2.5.7. Special equipment
• 2.5.8. Working with a load
• 2.5.9. Before leaving the truck
• 2.5.10. Drive batteries
• 2.5.11. Emergency operation
• 2.5.12. Loading.transporting
• 2.6. Service and maintenance
• 2.6.1. Maintenance safety guidelines
• 2.6.2. Recommendations for consumables
• 2.6.3. Inspection and maintenance data
• 2.6.4. Regular maintenance
• 2.6.5. Routine inspection and maintenance
• 2.6.6. Inspection and maintenance schedule
• 2.6.7. Inspection and maintenance as required
• 2.6.8. Inspection and maintenance, every 1000 hours (every 250 hours for cold store trucks)
• 2.6.9. Inspection and maintenance, every 2000 hours (every 1000 hours for cold store trucks)
• 2.6.10. Inspection and maintenance, every 5000 hours (every 2500 hours for cold store trucks)
• 2.6.11. Inspection and maintenance, every 10,000 hours (every 5000 hours for cold store trucks)
• 2.6.12. Selfhelp
• 2.6.13. Decommissioning
• 2.7. Technical data
• 2.7.1. Dimensions
• 2.7.2. Technical data 1.4 tonne capacity
• 2.7.3. Technical data 1.6 tonne capacity
• 2.7.4. Technical data 1.7 tonne capacity
• 2.7.5. Technical data 1.7 tonne capacity (heavy duty)
• 2.7.6. Mast variations
• 2.7.7. Battery data
• 2.7.8. Noise emission levels
• 2.7.9. Frequency characteristic for human body vibrations
• 3. EnerSys.Hawker Batteries
• 4. Leadacid battery charger 24V . 48V
• 5. Leadacid battery charger 24V . 48V . 80V
• 6. MIDAC Batteries
• 7. TAB Batteries