Linde 1164-01 - D12R Operating Instructions SN W41164H00006 and up SN up to W41164V00125
Linde 1164-01 - D12R Operating Instructions SN W41164H00006 and up SN up to W41164V00125 - Image 2
Linde 1164-01 - D12R Operating Instructions SN W41164H00006 and up SN up to W41164V00125 - Image 3
Linde 1164-01 - D12R Operating Instructions SN W41164H00006 and up SN up to W41164V00125 - Image 4
Linde 1164-01 - D12R Operating Instructions SN W41164H00006 and up SN up to W41164V00125 - Image 5

Linde 1164-01 – D12R Operating Instructions SN W41164H00006 and up SN up to W41164V00125

$20.00

  • Type Of Manual: Operating Instructions
  • Manual ID: SN W41164H00006 and up SN up to W41164V00125
  • Format: PDF
  • Size: 83.3MB
  • Number of Pages: 1075
  • Serial Number:
    SN W41164H00006 and up SN up to W41164V00125
Category:

Description

  • Model List:

    • D12R
  • 1. Double pallet stackerD12R
  • 1.1. Table of content
  • 1.2. Introduction
  • 1.2.1. Your truck
  • 1.2.2. Conformity marking
  • 1.2.3. Declaration that reflects the content of the declaration of conformity
  • 1.2.4. Identification label
  • 1.2.5. Correct use
  • 1.2.6. Description of use and climatic conditions
  • 1.2.7. Impermissible use
  • 1.2.8. Symbols used
  • 1.2.9. Taking delivery of the industrial truck
  • 1.2.10. Rules for the operating company of industrial trucks
  • 1.2.11. Disposing of gel and lead batteries
  • 1.3. Safety
  • 1.3.1. Safety regulations
  • 1.3.2. Handling consumables
  • 1.3.3. Emissions
  • 1.3.3.1. Noise emission values
  • 1.3.3.2. Vibration values for upper limbs
  • 1.3.4. Residual risks
  • 1.3.5. Stability
  • 1.3.6. Competent person
  • 1.3.7. Periodic general checks on the trucks
  • 1.4. General views
  • 1.4.1. General view
  • 1.4.2. General view of the technical compartment
  • 1.4.3. Controls
  • 1.4.4. Display
  • 1.4.5. Electronic key (option)
  • 1.4.6. Labels
  • 1.5.1. Technical description
  • 1.5.2. Checks before first commissioning
  • 1.5.3. Preshift checks
  • 1.5.4. Daily checks before starting work
  • 1.5.4.1. Checking the function of the controls
  • 1.5.4.2. Checking the safety devices
  • 1.5.5. Truck operating instructions
  • 1.5.6. Stepping on.off the truck
  • 1.5.7. Operation of operator presence detection
  • 1.5.8. Drivers compartment settings
  • 1.5.8.1. Adjusting the seat
  • 1.5.8.2. Adjusting the floor
  • 1.5.8.3. Seat heater option
  • 1.5.9. Display
  • 1.5.9.1. Selection buttons
  • 1.5.9.2. Display of the drive wheel position
  • 1.5.9.3. Using the display unit
  • 1.5.10. Driving regulations
  • 1.5.11. Driving
  • 1.5.11.1. Determining the drive direction
  • 1.5.11.2. Starting up
  • 1.5.11.3. Forward travel.reverse travel
  • 1.5.11.4. Steering
  • 1.5.11.5. Reversing the direction of travel
  • 1.5.11.6. Emergency off switch
  • 1.5.11.7. Horn
  • 1.5.11.8. Adjusting the control unit
  • 1.5.11.9. Braking
  • 1.5.11.10. Drivers overhead guard
  • 1.5.11.11. ECO mode
  • 1.5.11.12. Using the truck on a slope
  • 1.5.12. connect access system (LFM)
  • 1.5.13. Transporting loads
  • 1.5.13.1. Reading the capacity plate
  • 1.5.13.2. Progressive stopping of the carriage in the lower position
  • 1.5.13.3. Using the mast
  • 1.5.13.4. Handling a single load
  • 1.5.13.5. Handling two stacked pallets
  • 1.5.14. Driving assistance system Speed Management
  • 1.5.14.1. Description of Speed Management
  • 1.5.15. Cold store usage (optional)
  • 1.5.16. Before leaving the truck
  • 1.5.17. Gel and lead battery
  • 1.5.17.1. General information on batteries
  • 1.5.17.2. Charging the battery
  • 1.5.17.3. Opening and closing the battery hood
  • 1.5.17.4. Disconnecting.connecting the battery connector
  • 1.5.17.5. Charging the battery using an external charger
  • 1.5.17.6. General information on changing batteries
  • 1.5.17.7. Changing the side access battery
  • 1.5.18. Handling the truck in an emergency
  • 1.5.18.1. Emergency lowering of the mast
  • 1.5.18.2. Towing the truck
  • 1.5.19. Handling the truck in specific situations
  • 1.5.19.1. Slinging the truck
  • 1.5.19.2. Lifting the truck
  • 1.6. Maintenance
  • 1.6.1. General information
  • 1.6.2. Technical data for inspection and maintenance
  • 1.6.3. Recommended lubricants
  • 1.6.4. Accessing the technical compartment
  • 1.6.5. Regular maintenance
  • 1.6.6. Maintenance plan
  • 1.6.7. Chassis, bodywork and fittings
  • 1.6.7.1. Cleaning the truck
  • 1.6.7.2. Cleaning the battery and the battery compartment
  • 1.6.8. Steering and wheels
  • 1.6.8.1. Checking the condition of the wheels
  • 1.6.9. Electrical equipment
  • 1.6.9.1. Cleaning and blowing out the electrical components
  • 1.6.9.2. Checking the electrolyte level and topping up with water
  • 1.6.9.3. Checking the condition of cables, terminals and the battery connector
  • 1.6.10. Hydraulic systems
  • 1.6.10.1. Checking the hydraulic system for leaks
  • 1.6.10.2. Checking the hydraulic oil level
  • 1.6.11. Lift mast
  • 1.6.11.1. Cleaning and lubricating the chains
  • 1.6.11.2. Adjusting the length of the mast chains
  • 1.6.11.3. Checking the protective screen
  • 1.6.12. Storage and disposal
  • 1.6.12.1. Storage of truck
  • 1.6.12.2. Disposal of old trucks
  • 1.7. Datasheet
  • 1.7.1. D12R datasheet
  • 1.7.2. D12R mast types
  • 1.7.3. Ecodesign requirements for electric motors and variable speed drives
  • 2. EnerSys.Hawker Batteries
  • 3. KF Charger
  • 4. Leadacid battery charger 24V
  • 5. Leadacid battery charger 24V . 48V
  • 6. Leadacid battery charger 24V . 48V . 80V
  • 7. LiIonCharger 18 kW
  • 8. LiIonCharger 24V . 120A
  • 9. Lithiumion batteriesT20R.R.S.SF.SR, T25R.R.S.SF.SRD12R.R.S.SFL14.16R.R
  • 9.1. Table of content
  • 9.2. Introduction
  • 9.2.1. Introduction
  • 9.2.2. Information on the conformity of lithiumion batteries
  • 9.3. Safety
  • 9.3.1. Special lithiumion safety rules
  • 9.3.2. What to do in the event of incorrect use
  • 9.3.3. Personal protective measures following an incident
  • 9.3.4. What to do in the event of an accidental spillage
  • 9.3.5. Transporting a lithiumion battery
  • 9.3.6. Scrapping lithiumion batteries
  • 9.4. General views
  • 9.4.1. Lithiumion battery types
  • 9.4.2. Labels on the top of lithiumion batteries
  • 9.4.3. Labels on the sides of lithiumion batteries
  • 9.5.1. Checking the charge status
  • 9.5.2. Connecting.disconnecting the battery connector
  • 9.5.3. Commissioning a truck equipped with a side access lithiumion battery
  • 9.5.4. Automatic battery shutoff
  • 9.5.5. Battery fitted with a compartment
  • 9.5.6. Specific features of the display
  • 9.5.7. Installing the external charger
  • 9.5.8. Charging lithiumion batteries using an external charger
  • 9.5.9. Using the side socket to charge the battery
  • 9.5.10. Battery charging times
  • 9.5.11. Side access lithiumion battery Changing the battery
  • 9.5.12. Battery error codes
  • 9.5.13. Lithiumion batteries Longterm storage
  • 9.6. Maintenance
  • 9.6.1. Maintenance plan for lithiumion batteries
  • 9.6.2. Chassis, bodywork and fittings
  • 9.6.2.1. Cleaning the lithiumion battery
  • 9.6.3. Electrical equipment
  • 9.6.3.1. Harnesses and cables
  • 9.7. Technical specifications
  • 9.7.1. Lithiumion battery weight precision
  • 10. MIDAC Batteries
  • 11. TAB Batteries
Rate this product
Reviews

There are no reviews yet.

Be the first to review “Linde 1164-01 – D12R Operating Instructions SN W41164H00006 and up SN up to W41164V00125”

Your email address will not be published. Required fields are marked *

Related products