Linde 1167-03 – ML10, ML12, MM10, MM10i, MM12 Production site Xiamen Operating Instructions SN CT1167V50001 and up

Description

• Model List:
  • ML10
  • ML12
  • MM10
  • MM10i
  • MM12

• 1. Electric Pallet StackerML10 . ML12MM10 . MM10i . MM12
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Introduction
• 1.2.2. Intended use
• 1.2.3. Improper use
• 1.2.4. Additional information
• 1.2.5. Description of use and climatic conditions
• 1.2.6. Symbols used
• 1.2.7. Series
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. Handling consumables
• 1.3.5. Regulations
• 1.3.6. Competent person
• 1.4. Views
• 1.4.1. Drive directions
• 1.4.2. Main Components
• 1.4.3. Load label
• 1.4.4. Identification plates
• 1.5. Operation
• 1.5.1. Intended use of the trucks
• 1.5.2. First use
• 1.5.3. Daily checks before use
• 1.5.4. Checking the working environment
• 1.5.5. General information on batteries
• 1.5.6. Charging and discharging batteries
• 1.5.7. Drive operations
• 1.5.7.1. Description
• 1.5.7.2. Starting
• 1.5.7.3. Forward travel.reverse travel
• 1.5.7.4. Brake
• 1.5.7.5. Safety reverser
• 1.5.7.6. Creep Speed function
• 1.5.7.7. Steering
• 1.5.7.8. Using the truck on a slope
• 1.5.8. Hydraulic operations
• 1.5.8.1. Use of the mast
• 1.5.8.2. Working with loads
• 1.5.8.3. Emergency lowering
• 1.5.9. Before leaving the equipment
• 1.5.10. Putting the equipment back into operation
• 1.5.11. Slinging
• 1.5.12. Transporting the truck
• 1.6. Maintenance
• 1.6.1. General maintenance information
• 1.6.1.1. General
• 1.6.1.2. Daily inspection
• 1.6.1.3. Servicing and maintenance personnel training and qualification
• 1.6.1.4. Battery maintenance staff
• 1.6.1.5. Maintenance operations that do not require special training
• 1.6.1.6. Technical inspection and maintenance data
• 1.6.2. Maintenance work
• 1.6.2.1. Changing the battery
• 1.6.2.2. Lubrication point
• 1.6.2.3. Check the hydraulic oil level
• 1.6.2.4. Topping up the gear oil
• 1.6.2.5. Checking the fuses
• 1.6.3. Tyre operation
• 1.6.3.1. Drive Wheel
• 1.6.3.2. Load Wheels Removal and Installation
• 1.6.3.3. Caster Removal and Installation
• 1.6.4. Malfunction analysis
• 1.7. Technical data
• 1.7.1. ML10 . ML12 Technical Datasheet
• 1.7.2. MM10 . MM10i . MM12 Technical Datasheet