Linde 1168-01 – L14, L14AP, L16, L16AP Operating Instructions

Description

• Model List:
  • L14
  • L14AP
  • L16
  • L16AP

• 1. Automated Pallet Stacker
• 1.1. Table of content
• 1.2. Description of the robot
• 1.2.1. General view
• 1.2.2. Documentation
• 1.2.3. Function of the robot
• 1.2.4. Safety devices
• 1.2.5. Obstacle detection devices
• 1.2.5.1. Dynamic software fields of the front scanner (SLOW and STOP)
• 1.2.5.2. Projection of the dynamic fields on the circuit
• 1.2.5.3. Mobile rear scanner (option)
• 1.2.5.4. camera obstacleperception module (option)
• 1.2.5.5. Curtain laser scanner module for obstacle sensing (option)
• 1.2.5.6. Presence detection module for logistics unit
• 1.2.5.7. Logistics unit position
• 1.3. Robot residual risks
• 1.3.1. Residual risks
• 1.3.2. Periodic general inspection
• 1.3.3. Operation authorisation
• 1.3.4. Safety regulations
• 1.3.5. Robot modification
• 1.4. Startup
• 1.4.1. Commissioning
• 1.4.2. Everyday startup and initialisation
• 1.4.3. Automatic startup
• 1.5. Displacement in robot area
• 1.5.1. Prerequisites
• 1.5.2. Usual safety distance
• 1.6. Interventions on an robot
• 1.6.1. Normal stop in automatic mode
• 1.6.2. Emergency stop in automatic mode
• 1.6.3. Operation in manual mode
• 1.7. Switching off
• 1.7.1. Temporary stop
• 1.7.2. Prolonged stop
• 1.7.3. Typical procedure for lockout tagout
• 1.8. Battery management
• 1.8.1. Battery management
• 1.8.2. Standard batteries
• 1.8.3. Automatically chargeable batteries (option)
• 1.9. Technical datasheet
• 1.9.1. Dimensions
• 1.9.2. Technical Data
• 2. Electric Pallet StackerL14, L16, L14AP, L16APL14AS, L16AS, L14APAS, L16APAS
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Introduction
• 2.2.2. Intended use
• 2.2.3. Improper use
• 2.2.4. Additional information
• 2.2.5. Description of use and climatic conditions
• 2.2.6. Symbols used
• 2.2.7. Technical description
• 2.3. Safety
• 2.3.1. Safety guidelines
• 2.3.2. Residual risks
• 2.3.3. Stability
• 2.3.4. Handling consumables
• 2.3.5. EMC Electromagnetic compatibility
• 2.3.6. Regulations
• 2.3.7. Competent person
• 2.4. General views
• 2.4.1. Nameplate locations
• 2.4.2. Identification plates
• 2.4.3. Full view, without platform
• 2.4.4. Full view, with platform
• 2.4.5. Controls
• 2.4.6. Hour meter.Battery discharge indicator combination (ILDB)
• 2.5.1. Checks before first use
• 2.5.2. Daily checks before use
• 2.5.3. Using the charger
• 2.5.4. Driving, without platform
• 2.5.4.1. Operating instructions
• 2.5.4.2. Identification of the direction of travel
• 2.5.4.3. Startup
• 2.5.4.4. Forward travel.reverse travel
• 2.5.4.5. Reversing direction of travel
• 2.5.4.6. Steering
• 2.5.4.7. Safety reverser
• 2.5.4.8. Emergency stop button
• 2.5.4.9. Use of the truck on a slope
• 2.5.5. Driving, with platform
• 2.5.5.1. Operating instructions
• 2.5.5.2. Identification of the direction of travel
• 2.5.5.3. Startup
• 2.5.5.4. Pedestrian driving
• 2.5.5.5. Rideon driving
• 2.5.5.6. Forward travel.reverse travel
• 2.5.5.7. Reversing direction of travel
• 2.5.5.8. Steering
• 2.5.5.9. Emergency stop button
• 2.5.5.10. Using the truck on a slope
• 2.5.6. Braking system, horn
• 2.5.7. Using the mast
• 2.5.8. Load rating plate
• 2.5.9. Working with loads
• 2.5.10. Slinging, lifting and towing the mast
• 2.5.11. Measures when storing the stacker for a longer period of time
• 2.5.12. Cold store use
• 2.5.12.1. Use in cold stores
• 2.6. Maintenance
• 2.6.1. General information
• 2.6.2. Calendar of testing and maintenance operations
• 2.6.3. Technical inspection and maintenance characteristics
• 2.6.4. Recommended lubricants
• 2.6.5. Maintenance plan as required
• 2.6.5.1. Cleaning the truck
• 2.6.5.2. Cleaning the battery and its compartment
• 2.6.5.3. Opening the front hood (L14L16 without platform)
• 2.6.5.4. Removing flexible hood providing access to the tiller joint (L14L16 without platform)
• 2.6.5.5. Opening the front hood (L14L16 with platform)
• 2.6.5.6. Battery for side removal
• 2.6.5.7. Battery with vertical access
• 2.6.5.8. Opening the sideaccess battery cover
• 2.6.5.9. Opening the verticalaccess battery cover
• 2.6.5.10. Checking the fuses
• 2.6.6. Inspection and maintenance overview
• 2.6.6.1. hour Service plan
• 2.6.6.2. hour service plan
• 2.6.6.3. hour service plan
• 2.6.7. Traction motor
• 2.6.7.1. Cleaning the traction motor cooling fins
• 2.6.8. Steering . braking . wheels
• 2.6.8.1. Cleaning the pinion gear of the steering geared motor
• 2.6.8.2. Checking the condition and tightness of wheels
• 2.6.8.3. Adjusting the height of the stabiliser wheel
• 2.6.8.4. Checking and adjusting (if necessary) the air gap on the electromagnetic brake
• 2.6.9. Electrical equipment
• 2.6.9.1. Cleaning and blowing the electrical panel
• 2.6.9.2. Checking the tightness of power cables
• 2.6.9.3. Checking the electrolyte level and topping up with water
• 2.6.9.4. Checking the condition of cables, terminals and battery connector
• 2.6.10. Hydraulic circuits
• 2.6.10.1. Blowcleaning and checking the pump motor brushes
• 2.6.10.2. Checking the hydraulic system for leaks
• 2.6.10.3. Hydraulic oil level check
• 2.6.10.4. Hydraulic oil level check
• 2.6.10.5. Draining the hydraulic oil
• 2.6.10.6. Replacing the pressure filter
• 2.6.11. Lift mast
• 2.6.11.1. Specific mast maintenance
• 2.6.12. Lifting system
• 2.6.12.1. Checking the various joints
• 2.6.12.2. Checking the side stop fixings in the battery compartment
• 2.7. Technical datasheet
• 2.7.1. Mast data
• 2.7.2. L14 . L16 Technical Datasheet
• 2.7.3. L14AS . L16A2 Technical Datasheet
• 2.7.4. L14APAS . L16APAS Technical Datasheet
• 2.7.5. Noise emission values
• 2.7.6. Vibration characteristic values for bodily vibrations
• 3. Leadacid battery charger 24V
• 4. Leadacid battery charger 24V . 48V
• 5. Leadacid battery charger 24V . 48V . 80V