Linde 1171-01 – L06AC Ex3G, L10AC Ex3G, L12AC Ex3G, L16AC Ex3G Operating Instructions

Description

• Model List:
  • L06AC Ex3G
  • L10AC Ex3G
  • L12AC Ex3G
  • L16AC Ex3G

• 1. Electric pallet stacker with counterweightL06 AC, L10 AC, L12 AC, L16 AC Ex 3GD
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your industrial truck
• 1.2.2. Legal requirements for marketing
• 1.2.3. Intended use
• 1.2.4. Impermissible use
• 1.2.5. Basic information on explosion protection
• 1.2.6. Symbols used
• 1.2.7. Receiving the industrial truck
• 1.2.8. Documentation
• 1.2.9. Ecodesign requirements for electric motors and variable speed drives
• 1.2.10. Disposing of gel and lead batteries
• 1.3. Safety
• 1.3.1. Explosion protection safety guidelines
• 1.3.2. Protective equipment for explosion protection
• 1.3.3. Residual risks
• 1.3.4. Stability
• 1.3.5. Noise emission values
• 1.3.6. Vibration values for upper limbs
• 1.3.7. Competent person
• 1.4. Overview
• 1.4.1. Adhesive label
• 1.4.2. Nameplate
• 1.4.3. Truck overview
• 1.4.4. Overview of the technical compartment
• 1.4.5. Overview of the technical compartment with a separate hydraulic block
• 1.4.6. Operating devices
• 1.4.7. Display
• 1.4.8. Electronic key (option)
• 1.5. Operation
• 1.5.1. Technical description
• 1.5.2. Industrial trucks with explosion protection
• 1.5.2.1. Description of use and climatic conditions
• 1.5.2.2. Technical description of explosion protection
• 1.5.2.3. Regular testing
• 1.5.2.4. Batteries for explosion protection
• 1.5.2.5. Wheels and tyres for explosion protection
• 1.5.2.6. Checking the tyres
• 1.5.2.7. Checking the leak resistance
• 1.5.2.8. Handling consumables
• 1.5.2.9. Towing
• 1.5.3. Testing prior to initial commissioning
• 1.5.4. Preshift checks
• 1.5.5. Daily checks before starting work
• 1.5.5.1. Checking the function of the controls
• 1.5.5.2. Checking the safety devices
• 1.5.6. Display
• 1.5.6.1. Selection buttons
• 1.5.6.2. Using the display unit
• 1.5.6.3. Indicator light for explosion protection
• 1.5.7. Driving regulations
• 1.5.8. Driving
• 1.5.8.1. Determining the direction of travel
• 1.5.8.2. Starting up
• 1.5.8.3. Forward travel.reverse travel
• 1.5.8.4. Changing the drive direction
• 1.5.8.5. Double throw safety switch
• 1.5.8.6. Emergency off switch
• 1.5.8.7. Horn
• 1.5.8.8. Brakes
• 1.5.8.9. ECO mode
• 1.5.8.10. Using the truck on a ramp
• 1.5.9. BlueSpot
• 1.5.10. connect access system (LFM)
• 1.5.11. Transporting loads
• 1.5.11.1. Reading the capacity label
• 1.5.11.2. Progressive stopping of the carriage in the lower position
• 1.5.11.3. Using the mast
• 1.5.11.4. Operation of the mast tilt
• 1.5.11.5. Handling a single load
• 1.5.12. Before leaving the truck
• 1.5.13. Drive batteries
• 1.5.13.1. Leadacid battery
• 1.5.13.2. Opening and closing the battery hood
• 1.5.13.3. Disconnecting.connecting the battery connector
• 1.5.13.4. Charging the battery
• 1.5.13.5. Charging the battery using an external charger
• 1.5.13.6. General information on changing batteries
• 1.5.13.7. Changing the vertical access battery
• 1.5.13.8. Replacing the side access battery
• 1.5.14. Driving a truck in an emergency
• 1.5.14.1. Emergency lowering of the mast
• 1.5.14.2. Towing the truck
• 1.5.15. Handling the truck in special operating situations
• 1.5.15.1. Slinging the truck
• 1.5.15.2. Lifting the truck
• 1.6. Servicing
• 1.6.1. General information
• 1.6.2. Safety information regarding servicing work
• 1.6.3. Technical data for inspection and maintenance
• 1.6.4. Recommended lubricants
• 1.6.5. Regular maintenance
• 1.6.6. Service plan
• 1.6.7. Additional service plan for explosion protection
• 1.6.8. Chassis, bodywork and fittings
• 1.6.8.1. Cleaning the truck
• 1.6.8.2. Cleaning the battery and the battery compartment
• 1.6.9. Gearbox
• 1.6.9.1. Cleaning the traction motor cooling fins
• 1.6.10. Steering and wheels
• 1.6.10.1. Cleaning the pinion gear of the steering geared motor
• 1.6.10.2. Checking the condition of the wheels
• 1.6.11. Electrical equipment
• 1.6.11.1. Cleaning and blowing air through the electrical components
• 1.6.11.2. Checking the electrolyte level and topping up with water
• 1.6.11.3. Checking the condition of the cables, terminals and battery connector
• 1.6.12. Hydraulic systems
• 1.6.12.1. Checking the hydraulic system for leaks
• 1.6.12.2. Checking the hydraulic oil level
• 1.6.13. Lift mast
• 1.6.13.1. Cleaning and lubricating the chains
• 1.6.13.2. Adjusting the length of the mast chains
• 1.6.13.3. Checking the protective screen
• 1.6.14. Storage and disposal
• 1.6.14.1. Storage of truck
• 1.6.14.2. Disposal of old trucks
• 1.7. Technical data
• 1.7.1. Datasheet L06L10L12L16 AC Ex 3GD
• 1.7.2. Mast types