Linde 1171-01 – L06AC, L10AC, L12AC, L16AC Operating Instructions SN W41171V00001 and up

Description

• Model List:
  • L06AC
  • L10AC
  • L12AC
  • L16AC

• 1. V lithiumion batteries
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Important information about the compatibility of the lithiumion battery and truck
• 1.2.2. Before using the truck
• 1.2.3. Important information about this manual
• 1.2.4. Identification label on the lithiumion battery
• 1.2.5. Correct use
• 1.2.6. Dangerous misuse
• 1.2.7. Productspecific risks
• 1.2.8. Information on the conformity of lithiumion batteries
• 1.2.9. Explanations of terms and symbols
• 1.2.10. Qualification of the user
• 1.2.11. Description of use and climatic conditions
• 1.3. Safety
• 1.3.1. Battery management system and safety
• 1.3.2. What to do in an emergency
• 1.3.2.1. Firefighting
• 1.3.2.2. The battery becomes very hot and indicates a fault
• 1.3.2.3. If gas escapes from the battery
• 1.3.3. Firstaid measures
• 1.4. General views
• 1.4.1. General view of 24V LiB batteries from 1.7 to 3.5
• 1.4.2. General view of the 24V LiB 7.1 battery
• 1.4.3. General view of the 24V LiB battery from 10.6 to 14.2
• 1.5.1. Description of the battery
• 1.5.2. Safety guidelines
• 1.5.3. Status of the battery on delivery
• 1.5.4. Transport mode
• 1.5.5. Connecting the battery to the truck
• 1.5.6. Switching on the battery
• 1.5.7. Modes of operation
• 1.5.8. Temperature conditions for operating . charging
• 1.5.9. Charging the battery
• 1.5.9.1. Displaying the charging status
• 1.5.9.2. Charging the battery
• 1.5.9.3. Using the vertical socket to charge the battery
• 1.5.9.4. Using the side socket to charge the battery
• 1.5.9.5. Truck onboard charger
• 1.5.10. Changing the lithiumion battery
• 1.5.11. Switching off the battery
• 1.5.12. Resolving battery faults
• 1.5.13. Transporting lithiumion batteries
• 1.5.13.1. General
• 1.5.13.2. Safety guidelines for transporting the battery out of the truck
• 1.5.13.3. Safety guidelines for transporting the truck with a battery
• 1.5.13.4. Safety guidelines for transporting the battery
• 1.5.13.5. Detecting possible battery damage
• 1.6. Maintenance
• 1.6.1. Regular maintenance
• 1.6.2. Service plan
• 1.6.3. Cleaning the battery
• 1.6.4. Transporting and storing within the company
• 1.6.4.1. Safety provisions
• 1.6.4.2. Storage conditions
• 1.6.5. Disposing of batteries
• 1.7. Technical specifications
• 1.7.1. Lithiumion battery datasheet
• 2. Electric counterweight pallet stackerL06 AC, L10 AC, L12 AC, L16 AC
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Your truck
• 2.2.2. Conformity marking
• 2.2.3. Declaration that reflects the content of the declaration of conformity
• 2.2.4. Identification label
• 2.2.5. Correct use
• 2.2.6. Description of use and climatic conditions
• 2.2.7. Impermissible use
• 2.2.8. Symbols used
• 2.2.9. Taking delivery of the industrial truck
• 2.2.10. Rules for the operating company of industrial trucks
• 2.2.11. Disposing of gel and lead batteries
• 2.3. Safety
• 2.3.1. Safety regulations
• 2.3.2. Handling consumables
• 2.3.3. Emissions
• 2.3.3.1. Noise emission values
• 2.3.3.2. Vibration values for upper limbs
• 2.3.4. Residual risks
• 2.3.5. Stability
• 2.3.6. Competent person
• 2.3.7. Periodic general checks on the trucks
• 2.4. General views
• 2.4.1. General view of the truck
• 2.4.2. General view of the technical compartment
• 2.4.3. General view of the technical compartment with the separate hydraulic block
• 2.4.4. Controls
• 2.4.5. Display
• 2.4.6. Electronic key (option)
• 2.4.7. Labels
• 2.5.1. Technical description
• 2.5.2. Checks before first commissioning
• 2.5.3. Preshift checks before starting work
• 2.5.4. Daily checks before starting work
• 2.5.4.1. Checking the function of the controls
• 2.5.4.2. Checking the safety devices
• 2.5.5. Truck operating instructions
• 2.5.6. Display
• 2.5.6.1. Selection buttons
• 2.5.6.2. Using the display unit
• 2.5.7. Driving regulations
• 2.5.8. Driving
• 2.5.8.1. Determining the direction of travel
• 2.5.8.2. Starting up
• 2.5.8.3. Forward travel.reverse travel
• 2.5.8.4. Double throw safety switch
• 2.5.8.5. Emergency off switch
• 2.5.8.6. Horn
• 2.5.8.7. Braking
• 2.5.8.8. ECO mode
• 2.5.8.9. Using the truck on a ramp
• 2.5.9. BlueSpot
• 2.5.10. connect access system (LFM)
• 2.5.11. Transporting loads
• 2.5.11.1. Reading the capacity label
• 2.5.11.2. Progressive stopping of the carriage in the lower position
• 2.5.11.3. Using the mast
• 2.5.11.4. Operation of the mast tilt
• 2.5.11.5. Handling a single load
• 2.5.12. Cold store usage (optional)
• 2.5.13. Before leaving the truck
• 2.5.14. Gel and lead battery
• 2.5.14.1. General information on batteries
• 2.5.14.2. Opening and closing the battery hood
• 2.5.14.3. Disconnecting.connecting the battery connector
• 2.5.14.4. Charging the battery
• 2.5.14.5. Charging the battery using an external charger
• 2.5.14.6. General information on changing batteries
• 2.5.14.7. Changing the vertical access battery
• 2.5.14.8. Replacing the side access battery
• 2.5.15. Handling the truck in an emergency
• 2.5.15.1. Emergency lowering of the mast
• 2.5.16. Handling the truck in specific situations
• 2.5.16.1. Slinging the truck
• 2.5.16.2. Lifting the truck
• 2.6. Maintenance
• 2.6.1. General information
• 2.6.2. Technical data for inspection and maintenance
• 2.6.3. Recommended lubricants
• 2.6.4. Regular maintenance
• 2.6.5. Service plan
• 2.6.6. Chassis, bodywork and fittings
• 2.6.6.1. Cleaning the truck
• 2.6.6.2. Cleaning the battery and the battery compartment
• 2.6.7. Transmission
• 2.6.7.1. Cleaning the traction motor cooling fins
• 2.6.8. Steering and wheels
• 2.6.8.1. Cleaning the pinion gear of the steering geared motor
• 2.6.8.2. Checking the condition of the wheels
• 2.6.9. Electrical equipment
• 2.6.9.1. Cleaning and blowing air through the electrical components
• 2.6.9.2. Checking the electrolyte level and topping up with water
• 2.6.9.3. Checking the condition of the cables, terminals and battery connector
• 2.6.10. Hydraulic systems
• 2.6.10.1. Checking the hydraulic system for leaks
• 2.6.10.2. Checking the hydraulic oil level
• 2.6.11. Lift mast
• 2.6.11.1. Cleaning and lubricating the chains
• 2.6.11.2. Adjusting the length of the mast chains
• 2.6.11.3. Checking the protective screen
• 2.6.12. Storage and disposal
• 2.6.12.1. Storage of truck
• 2.6.12.2. Disposal of old trucks
• 2.7. Datasheet
• 2.7.1. Datasheet L06L10L12L16 AC
• 2.7.2. Mast types
• 2.7.3. Ecodesign requirements for electric motors and variable speed drives
• 3. Leadacid battery charger 24V
• 4. Leadacid battery charger 24V . 48V
• 5. Leadacid battery charger 24V . 48V . 80V
• 6. LiIonCharger 24V . 120A