Linde 1172-01 – L12 EX E2, L12 EX i E2 Operating Instructions

Description

• Model List:
  • L12 EX E2
  • L12 EX i E2

• 1. Pallet stackerL12, L12i
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Applicable standards and directives
• 1.2.2. Proper use
• 1.2.3. Improper use
• 1.2.4. Definitions
• 1.2.5. Description of use and climatic conditions
• 1.2.6. Symbols used
• 1.2.7. Technical description
• 1.2.8. Drive
• 1.2.9. Steering
• 1.2.10. Hydraulic system
• 1.2.11. Operation
• 1.2.12. Braking system
• 1.2.13. Load lift system
• 1.2.14. Chassis frame
• 1.2.15. Electrical system
• 1.2.16. Insulation monitoring
• 1.2.17. Insulation monitoring warning
• 1.2.18. Insulation monitoring fault
• 1.2.19. Temperature monitoring
• 1.2.20. Taking delivery of the industrial truck
• 1.2.21. Legal requirements for placing on the market
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. Handling consumables
• 1.3.5. Working with explosive materials
• 1.3.6. Transportation prohibitions
• 1.3.7. Loading trucks
• 1.3.8. Operating procedures
• 1.3.9. Truck traffic area
• 1.3.10. Qualified person
• 1.3.11. Regulations
• 1.4. Overview
• 1.4.1. Truck overview
• 1.4.2. Identification plate
• 1.4.3. Display elements
• 1.4.4. Operating devices
• 1.5. Operation
• 1.5.1. Service plan before initial commissioning
• 1.5.2. Instructions for runningin
• 1.5.3. Preshift checks
• 1.5.4. Switching the truck on and off
• 1.5.5. Driving
• 1.5.6. Forward travel
• 1.5.7. Reverse travel
• 1.5.8. Changing the drive direction
• 1.5.9. Steering
• 1.5.10. Decelerating when cornering
• 1.5.11. Belly switch
• 1.5.12. Brake system
• 1.5.13. Horn
• 1.5.14. Emergency off switch
• 1.5.15. Working with a load
• 1.5.15.1. Driving with load
• 1.5.15.2. Handling loads
• 1.5.15.3. Use of the truck on a slope
• 1.5.15.4. Emergency lowering
• 1.5.16. Parking the industrial truck securely
• 1.5.17. Loading.transporting
• 1.5.17.1. Crane loading
• 1.5.17.2. Transport
• 1.6. Servicing
• 1.6.1. General information
• 1.6.2. Inspection and maintenance data
• 1.6.3. Recommendations for consumables
• 1.6.4. Inspection and maintenance overview
• 1.6.4.1. hour service plan
• 1.6.4.2. hour service plan
• 1.6.4.3. hour service plan
• 1.6.4.4. hour service plan
• 1.6.5. Preparatory tasks
• 1.6.5.1. Cleaning the industrial truck
• 1.6.6. Gearbox
• 1.6.6.1. Reduction gear maintenance
• 1.6.7. Chassis, bodywork and fittings
• 1.6.7.1. Checking the pressuretight housing
• 1.6.7.2. Lifting device
• 1.6.7.3. Other cleaning and greasing
• 1.6.8. Chassis frame
• 1.6.8.1. Tightening the wheel fastenings
• 1.6.8.2. Servicing the wheels and rollers
• 1.6.8.3. Checking the brake system
• 1.6.9. Operating devices
• 1.6.9.1. Checking that the horn is working correctly
• 1.6.10. Electrics.electronics
• 1.6.10.1. Checking the battery charge status
• 1.6.10.2. Connecting the battery to an external battery charger
• 1.6.10.3. Replacing the battery
• 1.6.10.4. Checking the condition and secure attachment of electric lines, cable connectors, cable connections and explosionprotected screw joints
• 1.6.11. Hydraulics
• 1.6.11.1. Servicing the hydraulic system
• 1.6.12. Load lift system
• 1.6.12.1. Checking the antispark protection on the fork arms for wear
• 1.6.12.2. Servicing the lift mast
• 1.6.13. Troubleshooting
• 1.6.13.1. Fuses
• 1.6.13.2. Reading out the error memory
• 1.6.13.3. Shutting down
• 1.6.13.4. Disposal of old trucks
• 1.6.13.5. Malfunctions during operation
• 1.7. Technical data
• 1.7.1. Technical data
• 1.7.2. Noise emission values