Linde 1174-01 – L14R, L14RW, L16R, L16RW Operating Instructions SN W41174V00083 and up

Description

• Model List:
  • L14R
  • L14RW
  • L16R
  • L16RW

• 1. V lithiumion batteries
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Important information about the compatibility of the lithiumion battery and truck
• 1.2.2. Before using the truck
• 1.2.3. Important information about this manual
• 1.2.4. Identification label on the lithiumion battery
• 1.2.5. Correct use
• 1.2.6. Dangerous misuse
• 1.2.7. Productspecific risks
• 1.2.8. Information on the conformity of lithiumion batteries
• 1.2.9. Explanations of terms and symbols
• 1.2.10. Qualification of the user
• 1.2.11. Description of use and climatic conditions
• 1.3. Safety
• 1.3.1. Battery management system and safety
• 1.3.2. What to do in an emergency
• 1.3.3. Firstaid measures
• 1.4. General views
• 1.4.1. General view of 24V LiB batteries from 1.7 to 3.5
• 1.4.2. General view of the 24V LiB 7.1 battery
• 1.4.3. General view of the 24V LiB battery from 10.6 to 14.2
• 1.5.1. Description of the battery
• 1.5.2. Safety guidelines
• 1.5.3. Status of the battery on delivery
• 1.5.4. Transport mode
• 1.5.5. Connecting the battery to the truck
• 1.5.6. Switching on the battery
• 1.5.7. Modes of operation
• 1.5.8. Temperature conditions for operating . charging
• 1.5.9. Charging the battery
• 1.5.10. Changing the lithiumion battery
• 1.5.11. Switching off the battery
• 1.5.12. Resolving battery faults
• 1.5.13. Transporting lithiumion batteries
• 1.6. Maintenance
• 1.6.1. Regular maintenance
• 1.6.2. Service plan
• 1.6.3. Cleaning the battery
• 1.6.4. Transporting and storing within the company
• 1.6.5. Disposing of batteries
• 1.7. Technical specifications
• 1.7.1. Lithiumion battery datasheet
• 2. Leadacid battery charger 24V
• 3. Leadacid battery charger 24V . 48V
• 4. Leadacid battery charger 24V . 48V . 80V
• 5. LiIonCharger 18 kW
• 6. LiIonCharger 24V . 120A
• 7. Lithiumion batteriesT20R.R.S.SF.SR, T25R.R.S.SF.SRD12R.R.S.SFL14.16R.R
• 7.1. Table of content
• 7.2. Introduction
• 7.2.1. Introduction
• 7.2.2. Information on the conformity of lithiumion batteries
• 7.3. Safety
• 7.3.1. Special lithiumion safety rules
• 7.3.2. What to do in the event of incorrect use
• 7.3.3. Personal protective measures following an incident
• 7.3.4. What to do in the event of an accidental spillage
• 7.3.5. Transporting a lithiumion battery
• 7.3.6. Scrapping lithiumion batteries
• 7.4. General views
• 7.4.1. Lithiumion battery types
• 7.4.2. Labels on the top of lithiumion batteries
• 7.4.3. Labels on the sides of lithiumion batteries
• 7.5.1. Checking the charge status
• 7.5.2. Connecting.disconnecting the battery connector
• 7.5.3. Commissioning a truck equipped with a side access lithiumion battery
• 7.5.4. Automatic battery shutoff
• 7.5.5. Battery fitted with a compartment
• 7.5.6. Specific features of the display
• 7.5.7. Installing the external charger
• 7.5.8. Charging lithiumion batteries using an external charger
• 7.5.9. Using the side socket to charge the battery
• 7.5.10. Battery charging times
• 7.5.11. Side access lithiumion battery Changing the battery
• 7.5.12. Battery error codes
• 7.5.13. Lithiumion batteries Longterm storage
• 7.6. Maintenance
• 7.6.1. Maintenance plan for lithiumion batteries
• 7.6.2. Chassis, bodywork and fittings
• 7.6.3. Electrical equipment
• 7.7. Technical specifications
• 7.7.1. Lithiumion battery weight precision
• 8. Pallet stackerL14 R, L16 R
• 8.1. Table of content
• 8.2. Introduction
• 8.2.1. Your truck
• 8.2.2. Conformity marking
• 8.2.3. Declaration that reflects the content of the declaration of conformity
• 8.2.4. Identification label
• 8.2.5. Correct use
• 8.2.6. Description of use and climatic conditions
• 8.2.7. Impermissible use
• 8.2.8. Symbols used
• 8.2.9. Taking delivery of the industrial truck
• 8.2.10. Rules for the operating company of industrial trucks
• 8.2.11. Disposing of gel and lead batteries
• 8.3. Safety
• 8.3.1. Safety regulations
• 8.3.2. Handling consumables
• 8.3.3. Emissions
• 8.3.4. Residual risks
• 8.3.5. Stability
• 8.3.6. Competent person
• 8.3.7. Periodic general checks on the trucks
• 8.4. General views
• 8.4.1. General view
• 8.4.2. General view of the technical compartment
• 8.4.3. Controls
• 8.4.4. Display
• 8.4.5. Electronic key (option)
• 8.4.6. Labels
• 8.5.1. Technical description
• 8.5.2. Checks before first commissioning
• 8.5.3. Preshift checks
• 8.5.4. Daily checks before starting work
• 8.5.5. Truck operating instructions
• 8.5.6. Operation of operator presence detection
• 8.5.7. Drivers compartment settings
• 8.5.8. Display
• 8.5.9. Driving regulations
• 8.5.10. Driving
• 8.5.11. connect access system (LFM)
• 8.5.12. Transporting loads
• 8.5.13. Driving assistance system Load Management
• 8.5.14. Cold store usage (optional)
• 8.5.15. Before leaving the truck
• 8.5.16. Gel and lead battery
• 8.5.17. Handling the truck in an emergency
• 8.5.18. Handling the truck in specific situations
• 8.6. Maintenance
• 8.6.1. General information
• 8.6.2. Technical data for inspection and maintenance
• 8.6.3. Recommended lubricants
• 8.6.4. Accessing the technical compartment
• 8.6.5. Regular maintenance
• 8.6.6. Maintenance plan
• 8.6.7. Chassis, bodywork and fittings
• 8.6.8. Steering and wheels
• 8.6.9. Electrical equipment
• 8.6.10. Hydraulic systems
• 8.6.11. Lift mast
• 8.6.12. Storage and disposal
• 8.7. Datasheet
• 8.7.1. L14R . L16R datasheet
• 8.7.2. L14RL16R mast types
• 8.7.3. Ecodesign requirements for electric motors and variable speed drives
• 9. Pallet stackerL14 RW, L16 RW
• 9.1. Table of content
• 9.2. Introduction
• 9.2.1. Your truck
• 9.2.2. Conformity marking
• 9.2.3. Declaration that reflects the content of the declaration of conformity
• 9.2.4. Identification label
• 9.2.5. Correct use
• 9.2.6. Description of use and climatic conditions
• 9.2.7. Impermissible use
• 9.2.8. Symbols used
• 9.2.9. Taking delivery of the industrial truck
• 9.2.10. Rules for the operating company of industrial trucks
• 9.2.11. Disposing of gel and lead batteries
• 9.3. Safety
• 9.3.1. Safety regulations
• 9.3.2. Handling consumables
• 9.3.3. Emissions
• 9.3.4. Residual risks
• 9.3.5. Stability
• 9.3.6. Competent person
• 9.3.7. Periodic general checks on the trucks
• 9.4. General views
• 9.4.1. General views
• 9.4.2. General view of the technical compartment
• 9.4.3. Controls
• 9.4.4. Display
• 9.4.5. Electronic key (option)
• 9.4.6. Labels
• 9.5.1. Technical description
• 9.5.2. Checks before first commissioning
• 9.5.3. Preshift checks
• 9.5.4. Daily checks before starting work
• 9.5.5. Truck operating instructions
• 9.5.6. Stepping on.off the truck
• 9.5.7. Drivers compartment settings
• 9.5.8. Display
• 9.5.9. Driving regulations
• 9.5.10. Driving with a dualpedal truck
• 9.5.11. Singlepedal option
• 9.5.12. connect access system (LFM)
• 9.5.13. Transporting loads
• 9.5.14. Driving assistance system Load Management
• 9.5.15. Cold store usage (optional)
• 9.5.16. Before leaving the truck
• 9.5.17. Gel and lead battery
• 9.5.18. Handling the truck in an emergency
• 9.5.19. Handling the truck in specific situations
• 9.6. Maintenance
• 9.6.1. General information
• 9.6.2. Technical data for inspection and maintenance
• 9.6.3. Recommended lubricants
• 9.6.4. Accessing the technical compartment
• 9.6.5. Regular maintenance
• 9.6.6. Service plan
• 9.6.7. Chassis, bodywork and fittings
• 9.6.8. Steering and wheels
• 9.6.9. Electrical equipment
• 9.6.10. Hydraulic systems
• 9.6.11. Lift mast
• 9.6.12. Storage and disposal
• 9.7. Datasheet
• 9.7.1. L14 RW . L16 RW datasheet
• 9.7.2. Datasheet for L14 RW . L16 RW with initial lift
• 9.7.3. L14 RW . L16 RW mast types
• 9.7.4. Ecodesign requirements for electric motors and variable speed drives