Linde 1190-01 – P-matic, P30C, P50C Operating Instructions SN W41190V00349 and up

Description

• Model List:
  • P-matic
  • P30C
  • P50C

• 1. Leadacid battery charger 24V
• 2. Leadacid battery charger 24V . 48V
• 3. Leadacid battery charger 24V . 48V . 80V
• 4. LiIonCharger 18 kW
• 5. Lithiumion batteriesD12 . 14, L12 . 14, N24HP, N20HP . L . Li, P30 . 50C, T20 . 25 AP . SP, T30
• 5.1. Table of content
• 5.2. Introduction
• 5.2.1. Introduction
• 5.2.2. Information on the conformity of lithiumion batteries
• 5.3. Safety
• 5.3.1. Special lithiumion safety rules
• 5.3.2. What to do in the event of incorrect use
• 5.3.3. Personal protective measures following an incident
• 5.3.4. What to do in the event of an accidental spillage
• 5.3.5. Transporting a lithiumion battery
• 5.3.6. Scrapping lithiumion batteries
• 5.4. General views
• 5.4.1. Lithiumion battery types
• 5.4.2. Labels on the top of lithiumion batteries
• 5.4.3. Labels on the sides of lithiumion batteries
• 5.5.1. Checking the charge status
• 5.5.2. Connecting.disconnecting the battery connector
• 5.5.3. Commissioning a truck equipped with a side access lithiumion battery
• 5.5.4. Automatic battery shutoff
• 5.5.5. Battery fitted with a compartment
• 5.5.6. Display on a truck equipped with a lithiumion battery
• 5.5.7. Display functions
• 5.5.8. Installing the external charger
• 5.5.9. Charging lithiumion batteries using an external charger
• 5.5.10. Using the side socket to charge the battery
• 5.5.11. Battery charging times
• 5.5.12. Side access lithiumion battery Changing the battery
• 5.5.13. Battery error codes
• 5.5.14. Lithiumion batteries Longterm storage
• 5.6. Maintenance
• 5.6.1. Maintenance plan for lithiumion batteries
• 5.6.2. Chassis, bodywork and fittings
• 5.6.2.1. Cleaning the lithiumion battery
• 5.6.3. Electrical equipment
• 5.6.3.1. Harnesses and cables
• 5.7. Technical specifications
• 5.7.1. Lithiumion battery weight precision
• 6. Tow tractorP30C, P50C
• 6.1. Table of content
• 6.2. Introduction
• 6.2.1. Your truck
• 6.2.2. Conformity marking
• 6.2.3. Declaration that reflects the content of the declaration of conformity
• 6.2.4. Identification label
• 6.2.5. Correct use
• 6.2.6. Description of use and climatic conditions
• 6.2.7. Impermissible use
• 6.2.8. Symbols used
• 6.2.9. Taking delivery of the industrial truck
• 6.2.10. Rules for the operating company of industrial trucks
• 6.2.11. Disposing of gel and lead batteries
• 6.3. Safety
• 6.3.1. Safety regulations
• 6.3.2. Handling consumables
• 6.3.3. Emissions
• 6.3.3.1. Noise emission values
• 6.3.3.2. Vibration values for upper limbs
• 6.3.4. Residual risks
• 6.3.5. Stability
• 6.3.6. Competent person
• 6.4. General views
• 6.4.1. General view of the truck
• 6.4.2. View of the technical compartment
• 6.4.3. Controls
• 6.4.4. Multifunction indicator
• 6.4.5. Labels
• 6.5.1. Technical description
• 6.5.2. Checks before first commissioning
• 6.5.3. Preshift checks before starting work
• 6.5.4. Daily checks before starting work
• 6.5.4.1. Checking the drive direction controls
• 6.5.4.2. Checking the electric steering
• 6.5.4.3. Checking the brakes
• 6.5.4.4. Checking the safety devices
• 6.5.5. Truck operating instructions
• 6.5.6. Driving regulations
• 6.5.7. Display
• 6.5.7.1. Display settings
• 6.5.8. Driving
• 6.5.8.1. Identification of the direction of travel
• 6.5.8.2. Startup
• 6.5.8.3. Forward travel . reverse travel
• 6.5.8.4. Steering
• 6.5.8.5. Changing the drive direction
• 6.5.8.6. Emergency stop button
• 6.5.8.7. Operation in rideon mode
• 6.5.8.8. Braking, horn, lighting
• 6.5.8.9. Driving on a slope
• 6.5.8.10. Safety when cornering speed limitation
• 6.5.9. connect access system (LFM)
• 6.5.10. Transporting loads
• 6.5.10.1. Coupling controls
• 6.5.10.2. Before towing a load
• 6.5.10.3. Coupling the trailer
• 6.5.10.4. Driving with a trailer
• 6.5.11. Before exiting the truck
• 6.5.12. Gel and lead batteries
• 6.5.12.1. General information on batteries
• 6.5.12.2. Charging the battery
• 6.5.12.3. Checking the battery charge status
• 6.5.12.4. Opening the battery cover
• 6.5.12.5. Plugging in . unplugging the battery connector
• 6.5.12.6. Battery charging with an external charger
• 6.5.12.7. Side access battery unlocking.locking the battery
• 6.5.12.8. Replacing the battery
• 6.5.12.9. Changing the battery using a hoist
• 6.5.12.10. Changing the side access battery using a roller frame
• 6.5.12.11. Changing the side access battery using a trolley
• 6.5.13. Handling the truck in an emergency
• 6.5.13.1. Towing the tow tractor
• 6.5.14. Handling the truck in specific situations
• 6.5.14.1. Slinging the tow tractor
• 6.5.14.2. Lifting the truck
• 6.6. Maintenance
• 6.6.1. General information
• 6.6.2. Technical data for inspection and maintenance
• 6.6.3. Recommended lubricants
• 6.6.4. Accessing the technical compartment
• 6.6.5. Regular maintenance
• 6.6.6. Maintenance schedule
• 6.6.7. Chassis, bodywork and fittings
• 6.6.7.1. Cleaning the tractor
• 6.6.7.2. Cleaning the battery and the battery compartment
• 6.6.7.3. Side access battery selection of battery compartment opening side
• 6.6.7.4. Seat checking the condition
• 6.6.7.5. Handlebar checking the condition
• 6.6.8. Motor
• 6.6.8.1. Cleaning the traction motor cooling fins
• 6.6.9. Steering.wheels.braking
• 6.6.9.1. Checking the condition of the wheels
• 6.6.9.2. Testing the steering geared motor pinion.turntable
• 6.6.10. Electrical equipment
• 6.6.10.1. Cleaning and blowing out the electrical components
• 6.6.10.2. Checking and cleaning the fan
• 6.6.10.3. Checking the condition of cables, terminals and the battery connector
• 6.6.10.4. Checking the electrolyte level and topping up with water
• 6.6.11. Storage and disposal
• 6.6.11.1. Tow tractor storage
• 6.6.11.2. Disposal of old trucks
• 6.7. Datasheet
• 6.7.1. Datasheet P30CP50C
• 6.7.2. Ecodesign requirements for electric motors and variable speed drives