Linde 126-01 – P60Z Operating Instructions SN 05.97 and up SN up to 07.2015

Description

• Model List:
  • P60Z

• 1. Electric tow tractorP60Z
• 1.1. Table of content
• 1.2. Introduction and general description
• 1.2.1. Introduction
• 1.2.2. Legal requirements for placing on the market
• 1.2.3. General description
• 1.3. Safety
• 1.3.1. Driver safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. In the event of tipover
• 1.3.5. Noise emission levels
• 1.3.6. Frequency characteristic for human body vibrations
• 1.4. Getting to know the truck
• 1.4.1. Location of identification plates and labels
• 1.4.2. Tractor type.capacity plate
• 1.4.3. General view of tow tractor
• 1.4.4. Operating controls and indicators
• 1.4.5. Lighting
• 1.4.6. Drivers display
• 1.5. Operation
• 1.5.1. Runningin instructions
• 1.5.2. Pre shift checks
• 1.5.2.1. Preshift
• 1.5.2.2. Check the battery state of charge
• 1.5.2.3. Check all controls and their operation
• 1.5.2.4. Check all Interlock switches
• 1.5.2.5. Check tyre pressures
• 1.5.2.6. Check the automatic towing coupling (if fitted)
• 1.5.2.7. Top up the screen wash reservoir (if fitted)
• 1.5.3. The battery
• 1.5.4. Operator adjustments
• 1.5.5. Braking
• 1.5.6. Driving
• 1.5.7. Coupling trailers
• 1.5.8. Towing guidelines
• 1.5.9. Towing a trailer
• 1.5.10. Loading the carrying compartment
• 1.5.11. Remote inching (option)
• 1.5.12. Windscreen wipers and demister (option)
• 1.5.13. Passenger seat (option)
• 1.6. Maintenance
• 1.6.1. Maintenance safety guidelines
• 1.6.2. Report of Thorough Examination
• 1.6.3. Covers and cowlings
• 1.6.4. Fuses
• 1.6.5. Jacking the tractor
• 1.6.6. Towing the tractor
• 1.6.7. Slinging the tractor
• 1.6.8. Securing for transportation
• 1.6.9. Recommended lubricants
• 1.6.10. Inspection and maintenance data
• 1.6.11. Routine inspection and maintenance
• 1.6.12. Service plans
• 1.6.12.1. As required
• 1.6.12.2. h Service plan
• 1.6.12.3. h Service plan
• 1.6.12.4. h Service plan
• 1.6.13. Motor
• 1.6.13.1. Check traction motor brush wear
• 1.6.14. Axles
• 1.6.14.1. Clean and check the gearbox breather
• 1.6.14.2. Drain and refill the drive axle
• 1.6.15. Chassis, bodywork and fittings
• 1.6.15.1. Clean the tractor
• 1.6.15.2. Check and lubricate the drivers seat
• 1.6.15.3. Check the seat belt for condition and correct operation (if fitted)
• 1.6.15.4. Lubricate the seat pan
• 1.6.15.5. Lubricate the cabin (if fitted)
• 1.6.15.6. Lubricate the automatic towing coupling (if fitted)
• 1.6.16. Undercarriage
• 1.6.16.1. Check security of the wheel nuts
• 1.6.16.2. Check condition and pressure of tyres
• 1.6.16.3. Check and lubricate the steering chain
• 1.6.16.4. Lubricate the steering turntable bearing
• 1.6.16.5. Lubricate the front suspension
• 1.6.16.6. Check the front suspension
• 1.6.16.7. Check and lubricate front wheel bearing
• 1.6.16.8. Check the braking system for damage, corrosion and leaks
• 1.6.16.9. Check the brake fluid level
• 1.6.16.10. Check the front and rear brake shoes
• 1.6.16.11. Change the brake fluid
• 1.6.16.12. Check and lubricate the parking brake mechanism
• 1.6.16.13. Check the drive axle rubber shock mounts
• 1.6.16.14. Check the drive axle suspension bushes
• 1.6.17. Controls
• 1.6.17.1. Check all controls and their operation
• 1.6.18. Electrical . Electronic
• 1.6.18.1. Check the condition of the battery and battery cables
• 1.6.18.2. Check the condition and security of electrical connections and cables
• 1.6.18.3. Check the electronic control unit
• 1.6.19. Taking the tractor out of operation
• 1.6.20. Decommissioning the tractor
• 1.7. Technical data
• 1.7.1. Battery data
• 1.7.2. Wheel rim and tyre data
• 1.7.3. Technical data 48 volt
• 1.7.4. Technical data 24 volt
• 1.8. Circuit diagrams
• 1.8.1. Circuit diagram