Linde 1313-01 - H25CT, H27CT, H30CT, H32CT Workshop Manuals SN 12.09 and up
Linde 1313-01 - H25CT, H27CT, H30CT, H32CT Workshop Manuals SN 12.09 and up - Image 2
Linde 1313-01 - H25CT, H27CT, H30CT, H32CT Workshop Manuals SN 12.09 and up - Image 3
Linde 1313-01 - H25CT, H27CT, H30CT, H32CT Workshop Manuals SN 12.09 and up - Image 4
Linde 1313-01 - H25CT, H27CT, H30CT, H32CT Workshop Manuals SN 12.09 and up - Image 5

Linde 1313-01 – H25CT, H27CT, H30CT, H32CT Workshop Manuals SN 12.09 and up

$50.00

  • Type Of Manual: Workshop Manuals
  • Manual ID: SN 12.09 and up
  • Format: PDF
  • Size: 50.3MB
  • Number of Pages: 463
  • Serial Number:
    SN 12.09 and up
Category:

Description

  • Model List:

    • H25CT
    • H27CT
    • H30CT
    • H32CT
  • 1. Accumulator service case
  • 1.1. Table of content
  • 1.2. Introduction
  • 1.2.1. General
  • 1.3. Safety information
  • 1.3.1. Symbols used
  • 1.3.2. Safety information
  • 1.4. Parts overview
  • 1.4.1. Accumulator service case
  • 1.4.2. Technical data
  • 1.5. Operation
  • 1.5.1. Checks before each use
  • 1.5.2. Determining the filling pressure for accumulators for load damping in practice
  • 1.5.3. Operating the accumulator service case
  • 2. Regular testing
  • 2.1. Table of content
  • 2.2. Regular testing
  • 2.2.1. Principles for testing industrial trucks
  • 2.2.2. Test log
  • 2.2.3. Testing instruments, measuring devices, tools and devices
  • 2.3. Electric motor
  • 2.3.1. Test steps for the electric traction motor
  • 2.4. Internal combustion engine
  • 2.4.1. Test steps for the exhaust system
  • 2.4.2. Diesel internal combustion engine
  • 2.4.3. LPG internal combustion engine
  • 2.5. Drive axle
  • 2.5.1. Drive axle test steps
  • 2.6. Chassis
  • 2.6.1. Test steps for chassis
  • 2.7. Drivers compartment
  • 2.7.1. Test steps for drivers compartment
  • 2.8. Steering systems
  • 2.8.1. Test steps for the steering
  • 2.9. Wheels and tyres
  • 2.9.1. Test steps for wheels
  • 2.9.2. Tyre test steps
  • 2.10. Brake system
  • 2.10.1. Definition and description of the industrial truck groups
  • 2.10.2. Permissible braking distances for unladen industrial trucks
  • 2.10.3. Service brake
  • 2.10.4. Parking brake
  • 2.11. Operating devices
  • 2.11.1. Test steps for operating devices
  • 2.12. Electrics.electronics
  • 2.12.1. Test steps for electrical equipment
  • 2.12.2. Notes regarding insulation testing
  • 2.12.3. Insulation testing
  • 2.12.4. Test steps for the battery and battery connection assemblies
  • 2.13. Hydraulics
  • 2.13.1. Test steps for hydraulic system
  • 2.13.2. Safety regulations for hydraulic hose lines
  • 2.14. Lift mast
  • 2.14.1. Test steps for lift mast
  • 2.14.2. Test steps for load chains
  • 2.15. Load support
  • 2.15.1. Test steps for fork arms
  • 2.15.2. Combined testing device for testing fork arms, lifting chains and lifting hydraulics
  • 2.16. Attachments
  • 2.16.1. Test steps for attachments and other lifting accessories
  • 2.17. Special equipment.accessories
  • 2.17.1. LPG tanks on trucks
  • 2.17.2. Test steps for other accessories
  • 3. Service case Release tools for contacts
  • 3.1. Table of content
  • 3.2. Safety information
  • 3.2.1. Safety information for repair and maintenance work
  • 3.3. Information
  • 3.3.1. Information
  • 3.4. Overview
  • 3.4.1. Overview of service cases
  • 3.5. Plug systems
  • 3.5.1. ATS 2.8 plug connector
  • 3.5.2. CMC plug connector
  • 3.5.3. DCS 9.5 plug connector
  • 3.5.4. DIN 1.5mm circular connector
  • 3.5.5. DIN 2.5mm circular connector
  • 3.5.6. Deutsch DTM plug connector
  • 3.5.7. ECU appliance plug
  • 3.5.8. MCON appliance plug
  • 3.5.9. Appliance plug with JPT and MQS contacts
  • 3.5.10. Appliance plug with MT2 and JPT contacts
  • 3.5.11. SICMA appliance plug
  • 3.5.12. Econoseal JMark 2 plug connector
  • 3.5.13. Elobau 11pin receptacle housing
  • 3.5.14. E5931 plug connector
  • 3.5.15. FASTINFASTON 6.3mm plug connector
  • 3.5.16. GT150 plug connector
  • 3.5.17. HDSCS plug connector
  • 3.5.18. JPT plug connector
  • 3.5.19. JPT SLD plug connector
  • 3.5.20. JPT plug connector Saab
  • 3.5.21. JPT plug connector VW
  • 3.5.22. Kompakt 1.1 plug connector
  • 3.5.23. Bosch Kompakt 4 plug connector
  • 3.5.24. Leavyseal plug connector
  • 3.5.25. MCON 1.2mm LL plug connector
  • 3.5.26. MCON 1.2mm CB plug connector
  • 3.5.27. MCP plug connector
  • 3.5.28. MetriPack 150 plug connector
  • 3.5.29. MiniFit plug connector
  • 3.5.30. Mini Universal MATENLOK plug connector
  • 3.5.31. Mini relay socket for DFK 1.3 and MDK 1.3
  • 3.5.32. MKR Plus plug connector
  • 3.5.33. MQS plug connector
  • 3.5.34. MR plug connector
  • 3.5.35. MTA plug housing and fuse housing
  • 3.5.36. MT2 plug connector
  • 3.5.37. MT2 1.5mm plug connector VW
  • 3.5.38. Multilock plug connector
  • 3.5.39. MX150 plug connector
  • 3.5.40. NG1 plug connector
  • 3.5.41. Phönix Contact HC plug connector
  • 3.5.42. PT 3F plug connector
  • 3.5.43. Relay socket with SPT contacts for DFK 1.3.4 and MDK 1.3.4
  • 3.5.44. Relay socket with SPT and MPT contacts
  • 3.5.45. Fuse holder with SPT contacts
  • 3.5.46. Sicma plug connector
  • 3.5.47. SLK 2.8 plug connector
  • 3.5.48. Souriau UTL7 plug connector
  • 3.5.49. Superseal 1.5mm plug connector
  • 3.5.50. Trident Neptune plug connector
  • 3.5.51. Universal MATENLOK plug connector
  • 3.5.52. VW 9.5mm plug connector
  • 4. Steering axle crimping tool
  • 4.1. Table of content
  • 4.2. Crimping tool
  • 4.2.1. Press tool Overview of parts
  • 4.2.2. Basic device
  • 4.2.3. Basic design
  • 4.3. Replacement kits
  • 4.3.1. Steering axle 301.1601
  • 4.3.2. Steering axle 302.303.1602.1603
  • 4.4. Steering axle 301.302.303
  • 4.4.1. Trackrod pin on the steering cylinder Preparing the press tool
  • 4.4.2. Pressing out the trackrod pin on the steering cylinder
  • 4.4.3. Trackrod pin on the axle stub Preparing the press tool
  • 4.4.4. Pressing out the trackrod pin on the axle stub
  • 4.4.5. Pressing in the trackrod pin on the axle stub
  • 4.4.6. Pressing in the trackrod pin on the steering cylinder
  • 4.5. Steering axle 1601
  • 4.5.1. Trackrod pin on the steering cylinder Preparing the press tool
  • 4.5.2. Pressing out the trackrod pin on the steering cylinder
  • 4.5.3. Trackrod pin for the mudflap on the axle stub Preparing the press tool
  • 4.5.4. Pressing out the trackrod pin for the mudflap on the axle stub
  • 4.5.5. Pressing in the trackrod pin for the mudflap on the axle stub
  • 4.5.6. Pressing in the trackrod pin on the steering cylinder
  • 4.6. Steering axle 1602.1603
  • 4.6.1. Trackrod pin on the steering cylinder Preparing the press tool
  • 4.6.2. Pressing out the trackrod pin on the steering cylinder
  • 4.6.3. Trackrod pin for the mud flap on the axle stub Preparing the press tool
  • 4.6.4. Pressing out the trackrod pin for the mud flap on the axle stub
  • 4.6.5. Pressing in the trackrod pin for the mud flap on the axle stub
  • 4.6.6. Pressing in the trackrod pin on the steering cylinder
  • 5. Linde IC engined truck1313_H25CT, 1313_H27CT, 1313_H30CT, 1313_H32CT
  • 5.1. Table of content
  • 5.2. Product information
  • 5.2.1. Diagnostics
  • 5.3. Motor
  • 5.3.1. LPG engine
  • 5.3.2. LPG system
  • 5.3.3. LPG tank
  • 5.4. Gearbox
  • 5.4.1. Description of the gearbox
  • 5.4.2. Traction drive
  • 5.5. Chassis, bodywork and fittings
  • 5.5.1. Chassis
  • 5.6. Chassis frame
  • 5.6.1. Steering system
  • 5.6.2. Brake system
  • 5.7. Controls
  • 5.7.1. Accelerator
  • 5.7.2. Joystick
  • 5.7.3. Pedals
  • 5.8. Electrics . Electronics
  • 5.8.1. General
  • 5.8.2. Central electrical system
  • 5.8.3. Checks
  • 5.9. Hydraulics
  • 5.9.1. Working hydraulics
  • 5.10. Load lift system
  • 5.10.1. Lift mast
  • 5.11. Circuit diagrams
  • 5.11.1. Hydraulic diagram
  • 5.11.2. Electronic circuit diagram
Rate this product
Reviews

There are no reviews yet.

Be the first to review “Linde 1313-01 – H25CT, H27CT, H30CT, H32CT Workshop Manuals SN 12.09 and up”

Your email address will not be published. Required fields are marked *

Related products