Linde 1346-01 – E18S, E20S Production site Summerville Operating Instructions

Description

• Model List:
  • E18S
  • E20S Production site Summerville

• 1. series Electric Forklift TruckModels E18S, E20S
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Scope
• 1.2.2. Obligations of the Equipment Owner
• 1.2.3. Operator Responsibilities
• 1.2.4. Proper use
• 1.2.5. Hazard messages
• 1.3. Safety
• 1.3.1. Before Operation
• 1.3.2. Operator Daily Checklist
• 1.3.3. Operating Position
• 1.3.4. Pedestrians
• 1.3.5. Travel
• 1.3.6. Lifting and Lowering
• 1.3.7. Inclines, Ramps, Docks, Elevators
• 1.3.8. Avoiding Falls and Tipovers
• 1.3.9. Suspended Loads
• 1.3.10. Parking
• 1.3.11. Battery Safety
• 1.3.12. Safety During Maintenance
• 1.3.12.1. Personnel Qualifications
• 1.3.12.2. Hazardous Substances
• 1.3.13. Operator warning decals
• 1.3.13.1. Data plate
• 1.3.13.2. Voltage decal
• 1.3.13.3. Operator warning decal
• 1.3.13.4. Trained operator warning decal
• 1.3.13.5. Test or service warning decal
• 1.3.13.6. Never stand or walk under forks warning decal
• 1.3.13.7. Do not lift personnel warning decal
• 1.3.13.8. Crushed fingers warning decal
• 1.3.13.9. No step warning decal
• 1.3.13.10. Back up alarm warning decal
• 1.4. Overview
• 1.4.1. Technical Description
• 1.4.2. Truck Components
• 1.4.3. Display Unit
• 1.4.4. Controls
• 1.4.5. Decal and Data Plate Location
• 1.4.6. Data Plate
• 1.4.7. Definition of directions
• 1.4.8. Chassis Options
• 1.5. Operation
• 1.5.1. Unloading and Preparing a New Truck for Operation
• 1.5.2. Steering Wheel Height Adjustment
• 1.5.3. Armrest Adjustment
• 1.5.4. Operating the Display Unit
• 1.5.5. Turning the Truck On and Off
• 1.5.6. Driving
• 1.5.7. Braking
• 1.5.8. Steering System
• 1.5.9. Horn
• 1.5.10. Emergency Stop Switch
• 1.5.11. Fork Position Adjustment
• 1.5.12. Hydraulic Controls
• 1.5.13. Lights and BackUp Alarm
• 1.5.14. Fan (optional equipment)
• 1.5.15. Tilt Memory (optional equipment)
• 1.5.16. Changing the Battery
• 1.5.17. Connecting the Battery to an External Charger
• 1.5.18. Manual Lowering of Fork Carriage
• 1.5.19. Towing the Truck
• 1.5.20. Securing the Truck for Transport
• 1.5.21. Hoisting the Truck
• 1.5.22. Long term storage
• 1.6. Maintenance
• 1.6.1. Personnel Qualifications
• 1.6.2. Cleaning
• 1.6.2.1. Cleaning the Truck
• 1.6.2.2. Cleaning the Lift Chains
• 1.6.3. Operator Inspection and Maintenance
• 1.6.3.1. Daily Inspection Overview
• 1.6.3.2. Daily Inspection Checklist
• 1.6.3.3. Check for fluid leakage
• 1.6.3.4. Check overhead guard
• 1.6.3.5. Check hydraulic cylinders
• 1.6.3.6. Check lift chains
• 1.6.3.7. Check fork carriage
• 1.6.3.8. Check battery retention
• 1.6.3.9. Check battery connector
• 1.6.3.10. Check hydraulic oil level
• 1.6.3.11. Check wheels and tires
• 1.6.3.12. Check the steering axle
• 1.6.3.13. Check decal condition
• 1.6.3.14. Check multifunction handle bellows
• 1.6.3.15. Antistatic strap (optional equipment)
• 1.6.3.16. Operational checks
• 1.6.4. Routine Lubrication and Inspection
• 1.6.4.1. Routine Lubrication and Inspection Intervals
• 1.6.4.2. Checking Gear Oil Level
• 1.6.4.3. Checking Pedals
• 1.6.4.4. Hydraulic Tank Pressure Valve Test
• 1.6.4.5. Steer Axle Lubrication
• 1.6.4.6. Lubricating Mast Bearing Blocks
• 1.6.4.7. Testing and Cleaning the Fans
• 1.6.4.8. Adjusting and Lubricating Lift Chains
• 1.6.4.9. Checking Reeving Hose Preload (optional equipment)
• 1.6.4.10. Lubricating the Sideshifter (optional equipment)
• 1.6.5. Scheduled Maintenance
• 1.6.5.1. General Maintenance Information
• 1.6.5.2. Scheduled Maintenance Chart
• 1.6.5.3. Sideshifter Maintenance Intervals
• 1.6.5.4. Sideshifter Maintenance (optional equipment)
• 1.6.6. Fluids and Lubricants
• 1.6.6.1. Capacities
• 1.6.6.2. Fluid and Lubricant Specifications
• 1.6.7. Troubleshooting
• 1.6.7.1. Fuses
• 1.7. Specifications
• 1.7.1. Dimensions
• 1.7.2. Specifications E18S and E20S
• 1.7.3. Mast Heights