Linde 144-01 – T20S Operating Instructions

Description

• Model List:
  • T20S

• 1. Electric pallet truck144_T20S
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your truck
• 1.2.2. Impermissible use
• 1.2.3. Specific use of the equipment
• 1.2.4. Truck acceptance
• 1.2.5. Symbols used
• 1.2.6. Legal requirements for placing on the market
• 1.2.7. Technical description
• 1.3. Safety
• 1.3.1. Safety regulations
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. Operation of industrial trucks in plant area
• 1.3.5. Competent person
• 1.3.6. Periodic general checks on trucks
• 1.3.7. Handling consumables
• 1.4. General views
• 1.4.1. Labels
• 1.4.2. General view, T20S
• 1.4.3. Controls
• 1.4.4. Multifunction indicator until 01.2009
• 1.4.5. Screen sequence until 01.2009
• 1.4.6. Adjusting the multifunction indicator until 01.2009
• 1.4.7. Multifunction indicator from 02.2009
• 1.4.8. Screen sequencefrom 02.2009
• 1.4.9. Adjusting the multifunction indicator from 02.2009
• 1.4.10. Biometry option
• 1.5.1. Operating instructions
• 1.5.2. Adjusting the floor
• 1.5.3. Startup
• 1.5.4. Emergency off switch
• 1.5.5. Determining the drive direction
• 1.5.6. Changing the drive direction
• 1.5.7. Steering
• 1.5.8. Use on slopes
• 1.5.9. Braking
• 1.5.10. Controlling the horn and the load arms
• 1.5.11. Load handling
• 1.5.12. Slinging, lifting, towing
• 1.6. Maintenance
• 1.6.1. Maintenance
• 1.6.2. Checks and maintenance work after the first 50 operating hours
• 1.6.3. Schedule of testing and maintenance operations
• 1.6.4. Technical data
• 1.6.5. Recommended lubricants
• 1.6.6. Configuring the multifunction indicator
• 1.6.7. Checking the forward.reverse and lifting.lowering controls
• 1.6.8. Checking the electric steering
• 1.6.9. Checking safety braking
• 1.6.10. Testing the safety devices
• 1.6.11. Checking the battery charge status
• 1.6.12. Checking the opening of the battery cover
• 1.6.13. Plugging in . unplugging the battery connector
• 1.6.14. Charging the battery using an external charger
• 1.6.15. Checking the condition of cables, terminals and battery connector
• 1.6.16. Maintenance schedule as required
• 1.6.16.1. Cleaning the truck
• 1.6.16.2. Clean the battery and its compartment
• 1.6.16.3. Removing the floor
• 1.6.16.4. Opening the motor compartment cover
• 1.6.16.5. Removing the steering wheel
• 1.6.16.6. Removing the controller cover
• 1.6.16.7. Check the fuses
• 1.6.16.8. Frontaccess battery changing using fixed or mobile stands
• 1.6.16.9. Frontaccess battery changing using a hoist
• 1.6.16.10. Removing.Refitting the battery
• 1.6.16.11. Side access battery changing using a roller frame
• 1.6.16.12. Sideaccess battery changing using a trolley
• 1.6.17. Inspection and maintenance overview
• 1.6.17.1. Schedule of testing and maintenance operations
• 1.6.18. Traction motor
• 1.6.18.1. Checking and, if necessary, replacing the traction motor brushes
• 1.6.19. Transmission
• 1.6.19.1. Checking the transmission gear oil level
• 1.6.19.2. Replacing the transmission gear oil
• 1.6.20. Steering.Wheels.Braking
• 1.6.20.1. Checking the mechanical mounting of components
• 1.6.20.2. Checking the wheel fastenings
• 1.6.20.3. Checking the condition of the wheels
• 1.6.20.4. Lubricating the steering pinions
• 1.6.20.5. Checking and, if necessary, replacing the steering motor brushes
• 1.6.20.6. Adjusting the electromagnetic brake
• 1.6.21. Electrical equipment
• 1.6.21.1. Clean the electrical plate
• 1.6.21.2. Cleaning and checking the wear of contacts
• 1.6.21.3. Checking and cleaning the controller fan
• 1.6.21.4. Battery maintenance
• 1.6.21.5. Checking the condition and mounting of cables and electrical connections
• 1.6.22. Hydraulic systems
• 1.6.22.1. Hydraulic system
• 1.6.22.2. Removing the pump unit
• 1.6.22.3. Changing the hydraulic oil
• 1.6.23. Load lift system
• 1.6.23.1. Lubricating the load lift system joints (option)
• 1.7. Datasheet
• 1.7.1. T20S Datasheet
• 2. EnerSys.Hawker Batteries
• 3. MIDAC Batteries
• 4. TAB Batteries