Linde 316-01 – S30, S30T, S30W, S40, S40T, S40W, S50, S50T, S50W, S60, S60T, S60W Operating Instructions SN up to 06.13

Description

• Model List:
  • S30
  • S30T
  • S30W
  • S40
  • S40T
  • S40W
  • S50
  • S50T
  • S50W
  • S60
  • S60T
  • S60W

• 1. Linde Forklift TruckS30, S40, S50, S60
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your Linde truck
• 1.2.2. Technical Description
• 1.2.3. Intended use
• 1.2.4. Impermissible use
• 1.2.5. Symbols used
• 1.2.6. Commissioning
• 1.2.7. Truck Takeover
• 1.2.8. EC declaration of conformity
• 1.3. Safety
• 1.3.1. Safety Rules
• 1.3.1.1. Safety Rules
• 1.3.1.2. Handling Fuel, Lubricants and Coolant
• 1.3.1.3. Residual risks
• 1.3.1.4. Stability
• 1.4. Overview
• 1.4.1. Description
• 1.4.1.1. General view of Truck
• 1.4.1.2. Type Plates
• 1.5. Operation
• 1.5.1. Wheel change
• 1.5.1.1. Location for jacks
• 1.5.1.2. Wheel removal drive axle
• 1.5.1.3. Wheel removal steer axle
• 1.5.1.4. Wheel assembly inspection
• 1.5.1.5. Wheel refitting drive axle
• 1.5.1.6. Wheel refitting steer axle
• 1.5.1.7. Examples of restraining devices
• 1.5.2. Truck access doors and covers
• 1.5.2.1. Drivers cabin
• 1.5.2.2. Engine access
• 1.5.3. Checks and tasks
• 1.5.3.1. Engine oil level check
• 1.5.3.2. Fuel level check
• 1.5.3.3. Coolant level check
• 1.5.3.4. Brake fluid check
• 1.5.3.5. Hydraulic oil level check
• 1.5.3.6. Filling the windscreen washer bottle
• 1.5.3.7. Adjusting the drivers seat
• 1.5.3.8. Tyres check
• 1.5.4. Starting and stopping the engine
• 1.5.4.1. Starting stopping the engine
• 1.5.5. Malfunctions
• 1.5.5.1. Malfunctions engine
• 1.5.6. Driving
• 1.5.6.1. Driving
• 1.5.6.2. Steering
• 1.5.6.3. Operate the horn
• 1.5.6.4. Cab interior light
• 1.5.6.5. Mirrors
• 1.5.7. Braking system
• 1.5.7.1. Braking system
• 1.5.8. Truck lighting and turn indicators
• 1.5.8.1. Lights, hazard and turn indicators
• 1.5.9. Washers and wipers
• 1.5.9.1. Operating the wipers
• 1.5.10. Ventilation and heating
• 1.5.10.1. Heater control and ventilation
• 1.5.11. Fuses
• 1.5.11.1. Fuses
• 1.5.12. Operating the truck
• 1.5.12.1. Before lifting a load
• 1.5.12.2. Lifting a load
• 1.5.12.3. Travelling with load
• 1.5.12.4. Depositing a load
• 1.5.12.5. Control levers
• 1.5.12.6. Before leaving the truck unattended
• 1.5.13. Towing
• 1.5.13.1. Towing
• 1.5.14. Optional equipment
• 1.5.14.1. Optional equipment
• 1.6. Maintenance
• 1.6.1. General remarks
• 1.6.1.1. Hoisting the truck
• 1.6.1.2. Measures before taking the truck out of operation
• 1.6.1.3. Putting the truck back into service
• 1.6.1.4. General information
• 1.6.1.5. Fuel and oil recommendations
• 1.6.1.6. Diesel fuel
• 1.6.2. Inspection and maintenance schedule
• 1.6.2.1. As required Service plan
• 1.6.2.2. h Service plan
• 1.6.2.3. h Service plan
• 1.6.2.4. h Service plan
• 1.6.2.5. h Service plan
• 1.6.2.6. h Service plan
• 1.6.2.7. h Service plan
• 1.6.2.8. Inspection and maintenance data
• 1.6.3. Engine
• 1.6.3.1. Engine oil level check
• 1.6.3.2. Engine oil change
• 1.6.3.3. Fuel prefilter clean
• 1.6.3.4. Fuel filter_change
• 1.6.3.5. Bleeding the fuel system
• 1.6.3.6. Dust valve check
• 1.6.3.7. Air filter element renew
• 1.6.3.8. Renew the safety element
• 1.6.3.9. Coolant level check
• 1.6.3.10. Coolant strength check
• 1.6.3.11. Coolant renew
• 1.6.3.12. Check and clean the radiator and hydraulic oil cooler
• 1.6.3.13. Engine mountings check
• 1.6.3.14. Intake and exhaust system check
• 1.6.3.15. Drive belt check
• 1.6.3.16. Valve clearances check
• 1.6.3.17. Check engine accessories
• 1.6.4. Chassis bodywork and fittings
• 1.6.4.1. Clean the truck
• 1.6.4.2. Check seat belt for condition and correct operation
• 1.6.4.3. Mirrors
• 1.6.4.4. Wheel nuts tighten
• 1.6.4.5. Drive axle hub oil level check
• 1.6.4.6. Drive axle oil change
• 1.6.4.7. Steer axle clean and lubricate
• 1.6.5. Chassis frame
• 1.6.5.1. Structured components check
• 1.6.6. Controls
• 1.6.6.1. Parking brake lubricate
• 1.6.7. Electrics
• 1.6.7.1. Battery check
• 1.6.8. Hydraulics
• 1.6.8.1. Hydraulic oil level check
• 1.6.8.2. Hydraulic oil filters change
• 1.6.8.3. Hydraulic oil renew
• 1.6.9. Load lift system
• 1.6.9.1. Work on the lifting device
• 1.6.9.2. Mast and traverse cylinders lubrication
• 1.6.9.3. Mast chains check and adjust
• 1.6.9.4. Lubrication points
• 1.6.9.5. Renewing the lift chains (at least every 6000h, 3 years and when 2 stretch has been attained)
• 1.6.10. Troubleshooting
• 1.6.10.1. Troubleshooting guide (Diesel engine)
• 1.6.10.2. Troubleshooting guide (Hydraulic system)
• 1.7. Technical data
• 1.7.1. Datasheet
• 1.7.1.1. Datasheet
• 1.7.2. Mast variations
• 1.7.2.1. Mast Variations
• 1.8. Circuit diagrams
• 1.8.1. Electrical circuit diagrams
• 1.8.1.1. Electrical Circuit
• 1.8.2. Hydraulic circuit diagrams
• 1.8.2.1. Hydraulic circuit