Linde 352-06 – H40D, H45D, H50D Production site Xiamen Operating Instructions SN C1X352X50001 and up

Description

• Model List:
  • H40D
  • H45D
  • H50D

• 1. Diesel truckH40D06, H45D06, H50D06
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Introduction
• 1.2.2. Intended use
• 1.2.3. Improper use
• 1.2.4. Additional information
• 1.2.5. Description of use and climatic conditions
• 1.2.6. Symbols used
• 1.2.7. Legal requirements for marketing
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. In the event of tipover
• 1.3.5. Handling consumables
• 1.3.6. Accident prevention check
• 1.3.7. Soot particulate filter inspection
• 1.3.8. EMC Electromagnetic Compatibility
• 1.3.9. Competent person
• 1.3.10. Regulations
• 1.3.11. Emergency exit for models with rear window
• 1.3.12. Installing attachments
• 1.3.13. Manually lowering the load forks
• 1.4. Views
• 1.4.1. General view
• 1.4.2. Identification plates
• 1.4.3. Warning Label Diagram
• 1.4.4. Control elements and indicators
• 1.4.5. Fire extinguisher installation position
• 1.4.6. Rearview mirror installation position
• 1.5. Operation
• 1.5.1. Daily checks and maintenance before operation
• 1.5.1.1. Checks and maintenance before first operation
• 1.5.1.2. Daily checks
• 1.5.1.3. Closing the engine cover
• 1.5.1.4. Checking the fuel level
• 1.5.1.5. Refuelling
• 1.5.1.6. Fastening the seat belt
• 1.5.1.7. Opening the seat belt
• 1.5.1.8. Adjusting the drivers seat
• 1.5.2. Instructions for entering and exiting the drivers cab
• 1.5.2.1. Entering and exiting the cab
• 1.5.3. Driving
• 1.5.3.1. Starting the engine
• 1.5.3.2. Switching off the engine
• 1.5.3.3. Driving
• 1.5.4. Steering system
• 1.5.4.1. Steering
• 1.5.5. Brake system
• 1.5.5.1. Service brake
• 1.5.6. Central control lever for lifting device and attachments
• 1.5.6.1. Centrallever control of lifting device and attachments
• 1.5.6.2. Tilting the lift mast forwards
• 1.5.6.3. Tilting the mast back
• 1.5.6.4. Lifting the fork carriage
• 1.5.6.5. Lowering the fork carriage
• 1.5.6.6. Operating the attachments
• 1.5.7. Lights and switches
• 1.5.7.1. Switching on the work light
• 1.5.7.2. Turning on the warning lights
• 1.5.7.3. Switching on the direction indicators
• 1.5.8. Horn, data logger
• 1.5.8.1. Operating the horn
• 1.5.8.2. Data logger
• 1.5.9. Before lifting a load
• 1.5.10. Loading
• 1.5.10.1. Adjusting the fork spread
• 1.5.10.2. Loading
• 1.5.11. Driving under load and unloading
• 1.5.11.1. Travel with a load
• 1.5.11.2. Unloading
• 1.5.12. Parking the truck
• 1.5.13. Transporting and lifting the truck
• 1.5.13.1. Transport with lorry or lowbed semitrailer
• 1.5.13.2. Hoisting the truck with a crane
• 1.5.13.3. Hoisting the truck with the eyebolts
• 1.5.14. Replacing wheels, towing jaws, removing the mast
• 1.5.14.1. Changing wheels
• 1.5.14.2. Trailer coupling
• 1.5.14.3. Mast removal
• 1.5.15. Towing instructions
• 1.5.15.1. Towing
• 1.5.15.2. Towing procedure
• 1.5.15.3. Releasing the wheel drive brake pressure
• 1.5.15.4. Opening the hydraulic system choke piston
• 1.5.15.5. After towing
• 1.5.15.6. Resetting the braking force
• 1.5.16. Taking the truck out of operation
• 1.6. Maintenance
• 1.6.1. Summary
• 1.6.2. Recommended fuels and oils
• 1.6.3. Inspection and maintenance after the first 50 working hours
• 1.6.4. Preparations
• 1.6.4.1. Cleaning the truck
• 1.6.5. Engine
• 1.6.5.1. Changing the engine oil
• 1.6.5.2. Checking the engine oil level
• 1.6.5.3. Changing the engine oil filter
• 1.6.5.4. Replacing the fuel filter.water trap
• 1.6.5.5. Changing the air filter insert and checking the vacuum switch
• 1.6.5.6. Cleaning the air filter insert
• 1.6.5.7. Emptying the fuel filter.water trap
• 1.6.5.8. Charging the fuel system
• 1.6.5.9. Checking the leak resistance of the intake and exhaust pipes
• 1.6.5.10. Cleaning and inspecting the injector
• 1.6.5.11. Checking the condition and fastening of the engine mounts
• 1.6.5.12. Checking or replacing the hoses in the fuel system and cooling system
• 1.6.6. Cooling system
• 1.6.6.1. Checking and cleaning the radiator fins
• 1.6.6.2. Changing the coolant
• 1.6.6.3. Checking the coolant level
• 1.6.7. Steering axle and wheels
• 1.6.7.1. Cleaning and lubricating the steering axle
• 1.6.7.2. Checking the tyres for damage and foreign matter
• 1.6.7.3. Tightening the tyre nuts
• 1.6.8. Chassis
• 1.6.8.1. Check the lap seat belt for condition and correct operation
• 1.6.8.2. Checking the installation of the engine and drive axle
• 1.6.8.3. Checking the fastening of the engine bracket, overhead guard, tilt cylinder, steering axle and wheel drive
• 1.6.9. Control system
• 1.6.9.1. Checking the operation of the parking brake
• 1.6.9.2. Checking the operation of the service brake
• 1.6.9.3. Checking the driving brake and adjusting if necessary
• 1.6.10. Electrical components
• 1.6.10.1. Checking battery charging status
• 1.6.10.2. Checking the condition and tightness of cables and connections
• 1.6.10.3. Checking fuses
• 1.6.11. Hydraulics
• 1.6.11.1. Replacing the breather
• 1.6.11.2. Changing the hydraulic oil
• 1.6.11.3. Checking the hydraulic oil level
• 1.6.11.4. Checking the leak resistance of the hydraulics, drive axle, variable speed transmission and lines (visual inspection)
• 1.6.11.5. Checking the preload of the double hoses (if equipped with attachments)
• 1.6.12. Mast type
• 1.6.12.1. Work on themast and on the front part of the truck
• 1.6.12.2. Securing the mast against tilting back
• 1.6.12.3. Standard mast
• 1.6.12.4. Securing the raised standard mast
• 1.6.12.5. Duplex mast
• 1.6.12.6. Securing the raised duplex mast
• 1.6.12.7. Triplex mast
• 1.6.12.8. Securing the raised triplex mast
• 1.7. Technical data
• 1.7.1. H 40, H 45, H 50 models Technical datasheet Deutz TCD 2.9
• 1.7.2. H 40, H 45, H 50 models Technical datasheet_Deutz TD 2.9