Linde 360-01 – T16L Operating Instructions SN 03.97 and up SN up to 05.09

Description

• Model List:
  • T16L

• 1. Electric pallet truck with additional lift360_T16L
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Impermissible use
• 1.2.2. Description of use and climatic conditions
• 1.2.3. Symbols used
• 1.2.4. Technical description
• 1.2.5. EC declaration of conformity
• 1.3. Safety
• 1.3.1. Residual risks
• 1.3.2. Stability
• 1.3.3. Handling consumables
• 1.3.4. Periodic general checks on trucks
• 1.4. General views
• 1.4.1. Plates and labels
• 1.4.2. General view T16L type 360
• 1.4.3. T16L type 360 controls
• 1.4.4. Combined hour meter . battery discharge indicator
• 1.5.1. T16L driving
• 1.5.2. Braking system, horn
• 1.5.3. Use of the truck on a slope
• 1.5.4. Using the lifting device . T16L capacity
• 1.5.5. Handling loads
• 1.5.6. Slinging, lifting, towing the truck
• 1.6. Maintenance
• 1.6.1. Maintenance
• 1.6.2. Technical inspection and maintenance characteristics
• 1.6.3. Daily checks before starting work
• 1.6.3.1. Checking the direction controls
• 1.6.3.2. Checking the lift.lower controls of the fork arms
• 1.6.3.3. Checking the lifting.lowering controls of the mast
• 1.6.3.4. Check braking
• 1.6.3.5. Testing the safety devices
• 1.6.3.6. Checking the battery charge status
• 1.6.3.7. Opening the battery cover
• 1.6.3.8. Connect . disconnect the battery plug
• 1.6.3.9. Charging the battery with the builtin charger
• 1.6.3.10. Recharging the battery with an external charger
• 1.6.3.11. Checking the condition of the cables, terminals and battery connector
• 1.6.3.12. Specific mast maintenance
• 1.6.4. Service plan as required
• 1.6.4.1. Cleaning the truck
• 1.6.4.2. Battery maintenance
• 1.6.4.3. Battery with vertical access
• 1.6.4.4. Wheels, check the fixing
• 1.6.4.5. Wheels, check the state
• 1.6.4.6. Opening the front cover
• 1.6.4.7. Pull the flexible cover clear to access the reduction gearbox and themotor
• 1.6.4.8. Checking the fuses
• 1.6.5. Inspection and maintenance overview
• 1.6.5.1. Service plan as required
• 1.6.5.2. h Service plan
• 1.6.5.3. h Service plan
• 1.6.5.4. h Service plan
• 1.6.6. Traction motor
• 1.6.6.1. Inspection . replacement of the traction motor brushes
• 1.6.7. Gearbox
• 1.6.7.1. Transmission checking the oil level in the reducer
• 1.6.8. Steering . braking . wheels
• 1.6.8.1. Checking and adjusting the brake control
• 1.6.8.2. Checking and adjusting the belt tension
• 1.6.8.3. Adjusting the height of the stabiliser wheels
• 1.6.8.4. Electromagnetic brake, controlling the tiller foot pull switch
• 1.6.9. Electrical equipment
• 1.6.9.1. Electrical system checking the condition and fastening of electricalcables and connections
• 1.6.9.2. Cleaning the electrical panel
• 1.6.10. Hydraulic circuits
• 1.6.10.1. Checking the hydraulic fluid level
• 1.6.10.2. Draining the hydraulic circuit
• 1.6.11. Lift mast
• 1.6.11.1. Work on the lifting mast
• 1.7. Technical specification
• 1.7.1. Datasheet T16L type 360
• 1.8. Diagrams
• 1.8.1. Circuit diagram for T16L type 360
• 1.8.2. Hydraulic diagram for T16L Type 360