Linde 392-01 – H20D, H20T, H25D, H25T Operating Instructions SN 02.02 and up SN up to 12.12

Description

• Model List:
  • H20D
  • H20T
  • H25D
  • H25T

• 1. Diesel truckH20D, H25D
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your forklift truck
• 1.2.2. Proper usage
• 1.2.3. Impermissible use
• 1.2.4. Description of use and climatic conditions
• 1.2.5. Symbols used
• 1.2.6. Technical description
• 1.2.7. Reception of truck
• 1.2.8. Legal requirements for placing on the market
• 1.2.9. Service plan before initial commissioning
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. In the case of tipover
• 1.3.5. Handling consumables
• 1.3.6. Specialist
• 1.3.7. Operation of industrial trucks in plant area
• 1.3.8. Regulations
• 1.3.9. Instructions before fitting attachments
• 1.4. Overview
• 1.4.1. Identification plates
• 1.4.2. Additional capacity rating plate for attachments
• 1.4.3. Truck overview
• 1.4.4. Operating devices
• 1.4.5. Display unit
• 1.4.6. Switch panel
• 1.5. Operation
• 1.5.1. Runningin instructions
• 1.5.2. Checks before starting work
• 1.5.3. Standard equipment
• 1.5.4. Special equipment
• 1.5.5. Working under load
• 1.5.6. Loading . Transporting
• 1.6. Maintenance
• 1.6.1. General information
• 1.6.2. Working on Linde lift mast and at the front of the truck
• 1.6.3. Inspection and maintenance data
• 1.6.4. Recommendations for consumables
• 1.6.5. Inspection and maintenance overview
• 1.6.6. Engine
• 1.6.7. Gearbox
• 1.6.8. Chassis, bodywork and fittings
• 1.6.9. Chassis frame
• 1.6.10. Operating devices
• 1.6.11. Electrics
• 1.6.12. Hydraulics
• 1.6.13. Load lift system
• 1.6.14. Special equipment, accessories
• 1.6.15. Troubleshooting
• 1.7. Technical data
• 1.7.1. Type sheet H 20, as at 09.2010
• 1.7.2. Type sheet H 25, as at 09.2010
• 1.7.3. Load diagrams and lift mast data as at 06.2007
• 1.7.4. Noise emission values
• 1.7.5. Vibration characteristics for body vibrations
• 1.8. Circuit diagrams
• 1.8.1. Wiring diagram
• 1.8.2. Hydraulic circuit diagram
• 2. LPG truckH20T, H25T
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Your forklift truck
• 2.2.2. Proper usage
• 2.2.3. Impermissible use
• 2.2.4. Description of use and climatic conditions
• 2.2.5. Closing the LPG console without an LPG bottle in place
• 2.2.6. Symbols used
• 2.2.7. Technical description
• 2.2.8. Reception of truck
• 2.2.9. Legal requirements for placing on the market
• 2.2.10. Service plan before initial commissioning
• 2.3. Safety
• 2.3.1. Safety guidelines
• 2.3.2. Residual risks
• 2.3.3. Stability
• 2.3.4. In the case of tipover
• 2.3.5. Handling consumables
• 2.3.6. Specialist
• 2.3.7. Operation of industrial trucks in plant area
• 2.3.8. Regulations
• 2.3.9. Safety information on the LPG system
• 2.3.10. Safety guidelines for LPG (extract)
• 2.3.11. Safety measures when working on ignition systems
• 2.3.12. Instructions before fitting attachments
• 2.4. Overview
• 2.4.1. Identification plates
• 2.4.2. Additional capacity rating plate for attachments
• 2.4.3. Truck overview
• 2.4.4. Operating devices
• 2.4.5. Display unit
• 2.4.6. Switch panel
• 2.5. Operation
• 2.5.1. Runningin instructions
• 2.5.2. Checks before starting work
• 2.5.3. Standard equipment
• 2.5.4. Special equipment
• 2.5.5. Working under load
• 2.5.6. Loading . Transporting
• 2.6. Maintenance
• 2.6.1. General points
• 2.6.2. Working on the Linde lift mast and at the front of the truck
• 2.6.3. Inspection and maintenance data
• 2.6.4. Recommendations for consumables
• 2.6.5. Inspection and maintenance overview
• 2.6.6. Engine
• 2.6.7. Gearbox
• 2.6.8. Chassis, bodywork and fittings
• 2.6.9. Chassis frame
• 2.6.10. Operating devices
• 2.6.11. Electrics
• 2.6.12. Hydraulics
• 2.6.13. Load lift system
• 2.6.14. Special equipment, accessories
• 2.6.15. Troubleshooting
• 2.7. Technical data
• 2.7.1. Type sheet H 20 T, as at 09.2010
• 2.7.2. Type sheet H 25 T, as at 09.2010
• 2.7.3. Type sheet H 25 TCT, as at 09.2010
• 2.7.4. Load diagrams and lift mast data as at 06.2007
• 2.7.5. Noise emission values
• 2.7.6. Vibration characteristics for body vibrations
• 2.8. Circuit diagrams
• 2.8.1. Wiring diagram
• 2.8.2. Hydraulic circuit diagram
• 3. Linde Safety Guard
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Linde Safety Guard assistance system
• 3.2.2. Intended use
• 3.2.3. Declaration of conformity for radio equipment
• 3.2.4. Limitations for commissioning or for the permission to operate
• 3.2.5. Symbols used
• 3.3. Safety
• 3.3.1. Safety information
• 3.3.2. Service personnel
• 3.4. Operating devices and display elements
• 3.4.1. Overview
• 3.4.2. Safety Guard display unit Truck Unit
• 3.4.3. Safety Guard Truck Unit display unit for reach trucks
• 3.4.4. Safety Guard communication unit Truck Unit Small
• 3.4.5. Interactive warning vest
• 3.4.6. Mobile warning unit for the interactive warning vest Vest Unit
• 3.4.7. Power bank
• 3.4.8. Charging station for the power bank
• 3.4.9. Safety Guard portable warning unit Portable Unit
• 3.4.10. Safety Guard charging station
• 3.4.11. Safety Guard charging station from 10.2019
• 3.4.12. Safety Guard sensor
• 3.4.13. Safety Guard static warning unit Static Unit
• 3.4.14. Safety Guard Zone radio module Zone Marker
• 3.5. Operating
• 3.5.1. Installation
• 3.5.2. Preshift checks
• 3.5.3. Operation
• 3.6. Maintenance and disposal
• 3.6.1. Maintenance
• 3.6.2. Disposal
• 3.7. Technical data
• 3.7.1. Safety Guard display unit
• 3.7.2. Safety Guard active warning vest
• 3.7.3. Safety Guard mobile warning unit
• 3.7.4. Safety Guard sensor
• 3.7.5. Safety Guard communication unit
• 3.7.6. Safety Guard static warning unit
• 3.7.7. Safety Guard Zone radio module