New Holland 40D CVT, 45D CVT, 50D CVT Boomer Compact Tractor Operation and Maintenance Manual 48028209

New Holland 40D CVT, 45D CVT, 50D CVT Boomer Compact Tractor Operation and Maintenance Manual 48028209 - Image 2

New Holland 40D CVT, 45D CVT, 50D CVT Boomer Compact Tractor Operation and Maintenance Manual 48028209 - Image 3

New Holland 40D CVT, 45D CVT, 50D CVT Boomer Compact Tractor Operation and Maintenance Manual 48028209 - Image 4

New Holland 40D CVT, 45D CVT, 50D CVT Boomer Compact Tractor Operation and Maintenance Manual 48028209 - Image 5

new holland 40d cvt 45d cvt 50d cvt boomer compact tractor operation and maintenance manual 48028209 2

new holland 40d cvt 45d cvt 50d cvt boomer compact tractor operation and maintenance manual 48028209 3

New Holland 40D CVT, 45D CVT, 50D CVT Boomer Compact Tractor Operation and Maintenance Manual 48028209

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 48028209
Format: PDF
Size: 26.0MB
Number of Pages: 234
Serial Number:
48028209

Category: New Holland Operator Manual PDF

Model List:
- 40D CVT Boomer Compact Tractor
- 45D CVT Boomer Compact Tractor
- 50D CVT Boomer Compact Tractor

1. GENERAL INFORMATION
1.1. Note to the owner
1.2. Intended use
1.3. ElectroMagnetic Compatibility (EMC)
1.4. Metric and Imperial units abbreviations
1.5. Product Identification Number (PIN)
1.6. Operators manual storage on the machine
1.7. Machine orientation
2. SAFETY INFORMATION
2.1. Safety alert symbol and signal word definition
2.2. Safety alert symbol and signal word definition
2.3. Safety rules
2.4. Ecology and the environment
2.5. Safety features
2.6. Safety signs
2.7. Instructional signs
2.8. International symbols
3. CONTROLS AND INSTRUMENTS
3.1. ACCESS TO OPERATORS PLATFORM
3.1.1. Access to operators platform
3.2. OPERATORS SEAT
3.2.1. Operators seat Adjust
3.2.2. Operators seat beltCare
3.3. FORWARD CONTROLS
3.3.1. Steering wheel Adjust
3.3.2. Instrument panel
3.3.3. ADIC programming
3.3.4. ADIC fault codes Transmission and PTO related
3.3.5. Status and warning icons
3.3.6. Hand throttle lever
3.3.7. Front window wiper/washer
3.4. LEFTHAND SIDE CONTROLS
3.4.1. Transmission shuttle shift lever
3.4.2. Continuously Variable Transmission (CVT) controls
3.4.3. FourWheel Drive (4WD) system Control
3.4.4. Differential lock pedal
3.5. RIGHTHAND SIDE CONTROLS
3.5.1. Speed control pedal
3.5.2. Power TakeOff (PTO) controls
3.5.3. Hydraulic power lift (HPL)
3.5.4. Rear remote control valve(s)
3.5.5. Mid mount two spool remote control valve
3.6. REARWARD CONTROLS
3.6.1. Rear window
3.6.2. Auxiliary power outlet
3.6.3. Rear window wiper/washer (optional)
3.7. OVERHEAD CONTROLS
3.7.1. Cab climate control Overview
3.7.2. Air conditioning Adjust
3.7.3. Sun shades
3.7.4. Cab internal lighting
3.8. EXTERIOR CONTROLS
3.8.1. Hood latch
3.8.2. Rearview outside mirrors Adjust
3.8.3. Toolbox
4. OPERATING INSTRUCTIONS
4.1. COMMISSIONING THE UNIT
4.1.1. CVT transmission controls Settings and adjustments
4.1.2. Suggested operating mode settings Basic user interface
4.1.3. Suggested operating mode settings Enhanced user interface
4.1.4. Power TakeOff (PTO) operation
4.1.5. Extendable drawbar
4.1.6. Deluxe threepoint linkage
4.2. STARTING THE UNIT
4.2.1. Ignition switch Control identification
4.2.2. Preheating the system
4.2.3. Starting the tractor
4.2.4. Starting the tractor with jumper cables
4.3. STOPPING THE UNIT
4.3.1. Stopping the engine
4.3.2. Service brakes
4.3.3. Park brake
5. TRANSPORT OPERATIONS
5.1. ROAD TRANSPORT
5.1.1. External lighting Identification
5.1.2. External lighting Control Multifunction stalk switch
5.1.3. External lighting Control
5.2. RECOVERY TRANSPORT
5.2.1. Preparation for towing
6. WORKING OPERATIONS
6.1. GENERAL INFORMATION
6.1.1. Filling the fuel tank
6.1.2. Engine Runningin Procedure
6.1.3. Driving the tractor
6.2. Tractor hydraulics
6.2.1. Hydraulic Power Lift (HPL)
6.2.2. Position control
6.2.3. Top link
6.2.4. HPL drop rate control valve
6.2.5. Rear remote control valve(s)
6.2.6. Rear remote valve configuration
6.2.7. Mid mount two spool remote control valve
7. MAINTENANCE
7.1. GENERAL INFORMATION
7.1.1. General information
7.1.2. Torque Minimum tightening torques for normal assembly
7.1.3. Biodiesel fuel
7.1.4. Jacking points
7.1.5. Organic Acid Technology (OAT) coolant
7.1.6. Fluids and lubricants
7.2. MAINTENANCE CHART
7.2.1. Maintenance chart
7.3. Every 10 hours or daily
7.3.1. Engine oil level
7.3.2. Engine coolant level
7.4. After first 50 hours
7.4.1. Engine oil and filter
7.4.2. Hydraulic oil filter
7.4.3. Wheels bolt/nut
7.5. Every 50 hours
7.5.1. Lubrication points
7.5.2. Transmission oil level
7.5.3. Brake pedal free play
7.5.4. Fan belt tension
7.5.5. Airconditioning compressor drive belt
7.5.6. Tires
7.5.7. Front axle (4WD) oil level
7.6. Every 100 hours
7.6.1. Air cleaner primary element
7.6.2. Cab air filter
7.6.3. Fuel filter
7.7. Every 300 hours
7.7.1. Engine oil and filter
7.7.2. Hydraulic oil filter
7.7.3. Transmission oil pressure filter
7.7.4. Transmission control valve filter
7.7.5. Fuel filter
7.8. Every 600 hours
7.8.1. Georotor pump inner filter cleaning
7.8.2. Transmission fluid
7.8.3. Front axle (4WD) oil
7.9. Every 1000 hours
7.9.1. Air cleaner safety element inner safety element
7.9.2. Cab air filter
7.9.3. Engine coolant
7.10. General maintenance
7.10.1. Turn signal/hazard light bulb
7.10.2. Cab Work Lights
7.10.3. Park brake
7.10.4. Windshield wiper reservoir
7.10.5. Steering stop bolts
7.10.6. Alternator
7.10.7. Cab frame
7.10.8. Fuel system
7.11. STORAGE
7.11.1. Storage Storing
7.11.2. Storage Check
8. SPECIFICATIONS
8.1. Consumables
8.2. General specifications
8.3. Wheel tread settings
8.4. Front wheels Weight
8.5. Engine General specification
8.6. Frame Dimension
9. ACCESSORIES
9.1. Front ballast Install
9.2. Counterweight Install
9.3. Rear wheel ballasts Install
9.4. Fenders and guards Install
9.5. Factory installed winter packages
10. FORMS AND DECLARATIONS
10.1. Predelivery report Owners copy
10.2. Predelivery report Dealers copy

Rate this product