New Holland T5.110, T5.120 Electro Command Tractor Operation and Maintenance Manual 51537376

New Holland T5.110, T5.120 Electro Command Tractor Operation and Maintenance Manual 51537376 - Image 2

New Holland T5.110, T5.120 Electro Command Tractor Operation and Maintenance Manual 51537376 - Image 3

New Holland T5.110, T5.120 Electro Command Tractor Operation and Maintenance Manual 51537376 - Image 4

New Holland T5.110, T5.120 Electro Command Tractor Operation and Maintenance Manual 51537376 - Image 5

new holland t5110 t5120 electro command tractor operation and maintenance manual 51537376 2

new holland t5110 t5120 electro command tractor operation and maintenance manual 51537376 3

New Holland T5.110, T5.120 Electro Command Tractor Operation and Maintenance Manual 51537376

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 51537376
Format: PDF
Size: 29.2MB
Number of Pages: 372
Serial Number:
51537376

Category: New Holland Operator Manual PDF

Model List:
- T5.110 Electro Command Tractor
- T5.120 Electro Command Tractor

1. GENERAL INFORMATION
1.1. Note to the owner
1.2. Intended use
1.3. ElectroMagnetic Compatibility (EMC)
1.4. Manual scope and required training level
1.5. Metric and imperial units abbreviations
1.6. Identification plates
1.7. Operators manual storage on the machine
1.8. Machine orientation
1.9. Selective Catalytic Reduction (SCR) exhaust treatment Overview
2. SAFETY INFORMATION
2.1. Safety rules and signal word definitions
2.2. Safety rules General information
2.3. Safety rules Maintenance
2.4. Safety rules Wheels and tires
2.5. Safety rules Driving on public roads and transportation in general
2.6. Safety rules Explosions and fires
2.7. Safety rules Battery
2.8. Safety rules Instructor seat
2.9. Safety rules Operator presence system
2.10. Safety rules Power TakeOff (PTO)
2.11. Safety rules Reflectors and warning lights
2.12. Safety rules Seat belts
2.13. Safety rules Operator protective structure
2.14. Safety rules HVAC system
2.15. Safety rules Personal Protective Equipment (PPE)
2.16. Safety rules Do not use sign
2.17. Safety rules Hazardous chemicals
2.18. Safety rules Near utilities
2.19. Safety rules In the event of electrical storms
2.20. Safety rules Mounting and dismounting the machine
2.21. Safety rules Lifting and overhead loads
2.22. Safety rules Front end loader
2.23. Ecology and the environment
2.24. Towing the tractor for recovery
2.25. Tractor jacking points
2.26. Burn prevention
2.27. Decals and plates Safety signs
3. CONTROLS AND INSTRUMENTS
3.1. Access to operators platform
3.2. Operators seat
3.3. Instructional seat
3.4. Forward controls
3.5. Lefthand side controls
3.6. Righthand side controls
3.7. Exterior controls
3.8. Display
3.9. Warning and advisory symbols
4. OPERATING INSTRUCTIONS
4.1. Commissioning the unit
4.2. Starting the unit
4.3. Stopping the unit
4.4. Moving the unit
5. TRANSPORT OPERATIONS
5.1. Road transport
5.2. Recovery transport
6. WORKING OPERATIONS
6.1. General information
6.2. Transmission
6.3. Rear remote control valves
6.4. Midmount control valve
6.5. Rear Power TakeOff (PTO)
6.6. Front Power TakeOff (PTO)
6.7. Rear hydraulic lift
6.8. Front hydraulic lift
6.9. Rear threepoint hitch
6.10. Threepoint hitch front
6.11. Towbar
6.12. Wheels and tires
6.13. Tread and fender settings
6.14. Ballasting
6.15. Power sockets
7. MAINTENANCE
7.1. General information
7.2. Maintenance planning
7.3. As required
7.4. At warning message display
7.5. Every 10 hours or daily
7.6. After the first 50 hours of operation
7.7. Every 50 hours
7.8. Every 100 hours
7.9. Every 300 hours
7.10. Every 600 hours
7.11. Every 1200 hours or annually
7.12. Every 1200 hours or two years
7.13. Every two years
7.14. Every 3600 hours or two years
7.15. Every 3600 hours or four years
7.16. Electrical system
7.17. Fuse and relay locations
7.18. Storage
7.19. Calibration
8. TROUBLESHOOTING
8.1. Fault code resolution
8.2. Symptom(s)
9. SPECIFICATIONS
9.1. General dimensions
9.2. Maximum permitted loads on front and rear axle
9.3. Maximum permitted loads on drawbar
9.4. x 16 transmission speed table
9.5. x 32 transmission speed table
9.6. Additional equipment attachment points
9.7. Additional equipment attachment points
9.8. Front loader support
9.9. Backup alarm and light

Rate this product