Yanmar 4JH3-TE, 4JH3-TCE, 4JH3-HTE, 4JH3-DTE Marine Diesel Engine Operation Manual

Description

• Model List:
  • 4JH3-TE, 4JH3-TCE, 4JH3-HTE, 4JH3-DTE Marine Diesel Engine

• 1. INTRODUCTION
• 2. FOR SAFE OPERATION
• 2.1. Warning Symbols
• 2.2. Safety Precautions
• 2.3. Location of Product Safety Labels
• 3. PRODUCT EXPLANATION
• 3.1. Use Driving System
• 3.2. Engine Specifications
• 3.2.1. H3-TE
• 3.2.2. H3-TCE
• 3.2.3. H3-HTE
• 3.2.4. H3-DTE
• 3.3. Names of Parts
• 3.4. Major Servicing Parts
• 3.5. Operation Equipment
• 3.5.1. Instrument Panel
• 3.5.2. Remote Control Handle
• 4. BEFORE OPERATION
• 4.1. Fuel Oil, Lube Oil and Cooling Water
• 4.1.1. Fuel Oil
• 4.1.2. Lube oil
• 4.1.3. Cooling Water
• 4.2. Supplying Fuel
• 4.2.1. Filling the Fuel Tank
• 4.2.2. Bleeding the Fuel System
• 4.3. Supplying Engine Lube Oil
• 4.4. Supplying Marine Gear Lube Oil
• 4.5. Supplying Cooling Water
• 4.6. Cranking
• 4.7. Checking the Lube Oil and Cooling Water
• 5. HOW TO OPERATE
• 5.1. Inspection Before Starting
• 5.2. Checking the Illumination Lamps of the Panel Meters
• 5.2.1. Checking the Illumination Lamps of the Panel Meters
• 5.2.2. Checking the Alarm Devices
• 5.2.3. Checking the Panel Meters
• 5.3. starting
• 5.3.1. Daily Starting
• 5.3.2. Starting Under Low Temperature Conditions
• 5.3.3. Restarting After Starting Failure
• 5.3.4. After the Engine has Started
• 5.4. Adjusting the Engine Speed
• 5.5. Clutch Operation for the Marine Gear
• 5.5.1. Forward, Neutral, Reverse
• 5.5.2. Switching to Trawling (Available for KMH4A only)
• 5.6. Check During Operation
• 5.7. Stopping the Engine
• 5.8. Operation Procedure
• 5.9. Long-Term Storage
• 5.9.1. Before storing for long periods of time, perform the following.
• 5.9.2. Checking the Engine for Reuse After a Long Storage Period
• 6. MAINTENANCE INSPECTION
• 6.1. List of Periodic Inspections
• 6.2. Periodic Inspection Items
• 6.2.1. Inspection After Initial 50Hrs. Operation
• 6.2.2. Inspection Every 50 Hours
• 6.2.3. Inspection Every 250 Hrs. or 1 yr.
• 6.2.4. Inspection Every 500 Hrs.or 2 yrs.
• 6.2.5. Inspection Every 1000 Hrs. or 4 yrs.
• 7. TROUBLE AND TROUBLESHOOTING
• 7.1. Simple problems and the appropriate countermeasures
• 7.2. Emergency Repairs for Marine Gear Trouble
• 7.3. Consulting Your Yanmar Dealer or Distributor
• 8. SYSTEM DIAGRAM
• 8.1. Wiring diagram
• 8.1.1. B type Instrument Panel (Optional)
• 8.1.2. C type / C type B type(No.2 station) Instrument Panel (Optional)
• 8.1.3. New B type Instrument Panel (Optional)
• 8.1.4. New C type / New C type New B type(No.2 station)
• 8.1.5. Instrument Panel (Optional)
• 9. COLOPHON
• 10. BACK-ADDRESS