Yanmar 6CX(M)-ETE Marine Diesel Engine Operation Manual

Description

• Model List:
  • 6CX(M)-ETE Marine Diesel Engine

• 1. FOREWORD
• 2. INTRODUCTION
• 3. CONTENTS
• 4. FOR YOUR IN SAFETY
• 4.1. WARNING SYMBOLS
• 4.2. Safety Precautions
• 4.3. Location for Warning Device Labels
• 5. Explanation of Product
• 5.1. Use, Driving System, etc.
• 5.2. Major Servicing Parts
• 6. IDENTIFICATION OF IMPORTANT PARTS
• 7. ENGINE SPECIFICATIONS
• 8. PRECAUTIONS
• 9. FUEL AND LUBE OIL
• 9.1. Selection and Handling of Fuel
• 9.2. Selection of Lube Oil
• 10. INITIAL OPERATION OF NEW ENGINE
• 10.1. Fuel Supply
• 10.2. Lube Oil Supply
• 10.3. Cooling Water Supply to Fresh Water Tank
• 10.4. Tightening Drain Cock of Seawater System
• 10.5. Bleeding Air from Fuel System
• 10.6. Lubricating Each Section
• 10.7. External Inspection
• 10.8. Checking Operation of Remote Control Unit
• 10.9. Turning
• 10.10. Checking Operation of Gauges
• 10.11. Checking Alarm Devices
• 10.12. Re-checking immediately After Starting Engine
• 11. OPERATION
• 11.1. Starting
• 11.2. Cautions Required Immediately After Starting
• 11.3. Cautions Required During Navigation
• 11.4. Stopping
• 12. HANDLING THE CLUTCH
• 12.1. Handling Precautions
• 12.2. Trawling
• 12.3. Handling the Emergency Bolts
• 12.4. Checking and Adjusting the Reduction and Reversing Gear
• 13. PERIODICAL CHECK AND SERVICE
• 13.1. Fuel Oil System
• 13.2. Lube Oil System
• 13.3. Cooling Water System(Seawater and Fresh Water)
• 13.4. Checking and Adjusting the Engine Parts
• 13.5. Checking the Reduction and Reversing Gear
• 13.6. Adjusting the Remote Control Cable
• 13.7. Checking the Electrical Parts
• 13.8. Handling of Electrical Bilge Pump(optional)
• 13.9. Checking the Turbocharger
• 13.10. Air Cooler
• 14. EASY TROUBLESHOOTING GUIDE
• 14.1. Air is Mixed in Fuel System
• 14.2. Pressures of Engine Lube Oil is Abnormal
• 14.3. Fresh Water temperature is Abnormal High
• 14.4. Clutch Oil Pressure is Abnormal
• 15. SYSTEM DIAGRAMS
• 16. BACK COVER