Description
-
Model List:
- D475A-5E0 Bull Dozer
- 1. COVER
- 2. FOREWORD
- 2.1. BEFORE READING THIS MANUAL
- 2.2. SAFETY INFORMATION
- 2.3. INTRODUCTION
- 2.3.1. USE OF MACHINE
- 2.3.2. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
- 2.3.3. VISIBILITY FROM OPERATORS SEAT
- 2.4. NECESSARY INFORMATION
- 2.4.1. PRODUCT IDENTIFICATION NUMBER (PIN), MACHINE SERIAL NO. PLATE
- 2.4.2. EPA REGULATIONS, ENGINE NUMBER PLATE
- 2.4.3. BLADE SERIAL NO. PLATE POSITION
- 2.4.4. RIPPER SERIAL NO. PLATE POSITION
- 2.4.5. POSITION OF SERVICE METER
- 2.4.6. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 2.5. CONTENTS
- 3. SAFETY
- 3.1. SAFETY
- 3.2. SAFETY LABELS
- 3.2.1. POSITIONS OF SAFETY PICTOGRAMS
- 3.2.2. SAFETY LABELS
- 3.3. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
- 3.3.1. PRECAUTIONS BEFORE STARTING OPERATION
- 3.3.2. PREPARATIONS FOR SAFE OPERATION
- 3.3.3. FIRE PREVENTION
- 3.3.4. PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
- 3.3.5. DO NOT GET CAUGHT IN WORK EQUIPMENT
- 3.3.6. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
- 3.3.7. UNAUTHORIZED MODIFICATION
- 3.3.8. PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
- 3.3.9. PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
- 3.4. PRECAUTIONS FOR OPERATION
- 3.4.1. PRECAUTIONS FOR JOBSITE
- 3.4.2. STARTING ENGINE
- 3.4.3. OPERATION
- 3.4.4. TRANSPORTATION
- 3.4.5. TOWING
- 3.5. PRECAUTIONS FOR MAINTENANCE
- 3.5.1. PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
- 3.5.2. PRECAUTIONS FOR INSPECTION AND MAINTENANCE
- 4. OPERATION
- 4.1. GENERAL VIEW
- 4.1.1. GENERAL VIEW OF MACHINE
- 4.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
- 4.2. EXPLANATION OF COMPONENTS
- 4.2.1. FRONT PANEL
- 4.2.2. SWITCHES
- 4.2.3. CONTROL LEVERS, PEDALS
- 4.2.4. DUST INDICATOR
- 4.2.5. POWER SOURCE
- 4.2.6. FUSE BOX
- 4.2.7. DOOR OPEN LOCK
- 4.2.8. SASH GLASS INTERMEDIATE LOCK
- 4.2.9. CAP WITH LOCK
- 4.2.10. DOOR POCKET
- 4.2.11. ASHTRAY
- 4.2.12. TOOL BOX
- 4.2.13. CLEAN INTERIOR OF CAB
- 4.2.14. CAR STEREO, HANDLING
- 4.2.15. AIR CONDITIONER, HANDLING
- 4.3. OPERATION
- 4.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
- 4.3.2. STARTING ENGINE
- 4.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
- 4.3.4. STOPPING ENGINE
- 4.3.5. MOVING MACHINE
- 4.3.6. STOPPING MACHINE
- 4.3.7. SHIFTING GEAR
- 4.3.8. SHIFTING BETWEEN FORWARD AND REVERSE
- 4.3.9. STEERING MACHINE
- 4.3.10. PRECAUTIONS FOR OPERATION
- 4.3.11. PARKING MACHINE
- 4.3.12. CHECK AFTER STOPPING ENGINE
- 4.3.13. CHECK AFTER FINISHING WORK
- 4.3.14. LOCKING
- 4.3.15. WORK POSSIBLE USING BULLDOZER
- 4.3.16. EFFECTIVE USE OF MODE SELECTION SYSTEM
- 4.3.17. RIPPER OPERATION
- 4.3.18. OPERATING METHOD FOR RIPPING OPERATIONS
- 4.3.19. ADJUSTING POSTURE OF WORK EQUIPMENT
- 4.3.20. TIPS FOR LONGER UNDERCARRIAGE LIFE
- 4.4. TRANSPORTATION
- 4.4.1. TRANSPORTATION PROCEDURE
- 4.4.2. LOADING, UNLOADING WORK
- 4.4.3. METHOD OF LIFTING MACHINE
- 4.4.4. TRAVELING ON ROADS
- 4.4.5. REMOVAL OF CAB
- 4.4.6. INSTALLATION OF CAB
- 4.4.7. INSTALLATION OF ROPS
- 4.5. COLD WEATHER OPERATION
- 4.5.1. PRECAUTIONS FOR LOW TEMPERATURE
- 4.5.2. AFTER COMPLETION OF WORK
- 4.5.3. AFTER COLD WEATHER
- 4.6. LONGTERM STORAGE
- 4.6.1. BEFORE STORAGE
- 4.6.2. DURING STORAGE
- 4.6.3. AFTER STORAGE
- 4.6.4. STARTING MACHINE AFTER LONGTERM STORAGE
- 4.7. TROUBLESHOOTING
- 4.7.1. AFTER RUNNING OUT OF FUEL
- 4.7.2. METHOD OF TOWING MACHINE
- 4.7.3. IF BATTERY IS DISCHARGED
- 4.7.4. OTHER TROUBLE
- 4.7.5. WHEN MODE SELECTION SYSTEM FLASHES
- 5. MAINTENANCE
- 5.1. GUIDES TO MAINTENANCE
- 5.2. OUTLINES OF SERVICE
- 5.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
- 5.2.2. OUTLINE OF ELECTRIC SYSTEM
- 5.2.3. HANDLING HYDRAULIC RELATED EQUIPMENT
- 5.3. WEAR PARTS
- 5.3.1. WEAR PARTS LIST
- 5.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
- 5.4.1. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
- 5.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- 5.5.1. TORQUE LIST
- 5.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 5.6.1. SAFETY CRITICAL PARTS
- 5.7. MAINTENANCE SCHEDULE CHART
- 5.7.1. MAINTENANCE SCHEDULE CHART
- 5.8. SERVICE PROCEDURE
- 5.8.1. INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS)
- 5.8.2. WHEN REQUIRED
- 5.8.3. CHECK BEFORE STARTING
- 5.8.4. EVERY 250 HOURS SERVICE
- 5.8.5. EVERY 500 HOURS SERVICE
- 5.8.6. EVERY 1000 HOURS SERVICE
- 5.8.7. EVERY 2000 HOURS SERVICE
- 5.8.8. EVERY 4000 HOURS SERVICE
- 5.8.9. EVERY 8000 HOURS SERVICE
- 6. SPECIFICATIONS
- 6.1. SPECIFICATIONS
- 7. ATTACHMENTS, OPTIONS
- 7.1. GENERAL PRECAUTIONS
- 7.1.1. PRECAUTIONS RELATED TO SAFETY
- 7.2. SELECTION OF TRACK SHOE
- 7.2.1. SELECTION OF TRACK SHOES
- 7.3. PROCEDURE FOR SELECTING RIPPER POINT
- 7.4. EFFECTIVE METHOD OF OPERATION FOR DUAL TILTDOZER
- 7.4.1. BLADE CONDITION
- 7.4.2. DOZING WORK
- 7.4.3. LEVELING (SPREADING) OPERATION
- 7.4.4. DITCHING OPERATION
- 7.4.5. BOULDER RAISING OPERATION
- 7.4.6. SIDECUTTING OPERATIONS
- 7.4.7. HORIZONTAL DOZING OPERATIONS FROM SIDE SLOPE (ROUGH GROUND)
- 7.5. SHOE SLIP CONTROL
- 7.5.1. MODE SELECTION SWITCH PANEL (SHOE SLIP CONTROL)
- 7.5.2. EFFECTIVE USE OF MODE SELECTION SYSTEM
- 7.5.3. IF MODE SELECTION SYSTEM FLASHES
- 7.6. HANDLING MACHINES EQUIPPED WITH VHMS
- 7.6.1. VHMS INSTALLED, COMMUNICATIONS TERMINAL NOT INSTALLED
- 7.6.2. VHMS AND COMMUNICATIONS TERMINAL INSTALLED
- 8. INDEX
Reviews
There are no reviews yet.