Komatsu HM300-5 Articulated Dump Truck Field Assembly Instruction GEN00131-00

Description

• Model List:
  • HM300-5 Articulated Dump Truck

• 1. Cover
• 2. Contents
• 3. Drawings of removed units
• 4. Dimensions of removed units
• 5. Assembly procedure, necessary equipments, and schedule
• 6. Necessary tools and equipments
• 7. Assembly procedure
• 7.1. Installation of the sling
• 7.2. Stationary bare machine (travel)
• 7.3. Stationary bare machine (nontravel)
• 7.4. Installation of tire and wheel assembly
• 7.5. Installation of front under mirror
• 7.6. Installation of L.H. fender step
• 7.7. Installation of L.H. fender mirror
• 7.8. Installation of L.H. fender mudguard
• 7.9. Installation of R.H. fender handrail
• 7.10. Installation of R.H. fender mirror
• 7.11. Installation of R.H. fender mudguard
• 7.12. Installation of antenna
• 7.13. Installation of payload and revolving lamp
• 7.14. Installation of payload
• 7.15. Sling and put stationary dump body
• 7.16. Subassembly of dump body
• 7.17. Subassembly of dump body without dump body heating (optional)
• 7.18. Subassembly of dump body with dump body heating
• 7.19. ADT assembly with bearing (optional)
• 7.20. ADT assembly with side arm (optional)
• 7.21. ADT assembly with tailgate (optional)
• 7.22. ADT assembly with tailgate (optional)
• 7.23. ADT assembly with tailgate (optional)
• 7.24. Installation of dump body
• 7.25. Connection of hoist cylinder
• 7.26. Installation of fire prevention cover for hoist piping
• 7.27. Connection and adjustment of dump angle sensor
• 7.28. Installation and adjustment of dump body bottom mount
• 7.29. Installation of dump body stopper
• 7.30. Installation of end bolt after installing dump body
• 7.31. Touch up painting of dump body
• 7.32. Sticking of decal on dump body
• 7.33. Sticking of decal on dump body (OPT tailgate specification)
• 7.34. Adjustment1 of rearview monitor
• 7.35. Adjustment2 of rearview monitor
• 7.36. Adjustment3 of rearview monitor
• 7.37. Adjustment4 of rearview monitor
• 7.38. N2 gas adjustment of front and rear suspension
• 7.39. Attachment 1 Mirror adjustment procedure
• 7.40. Attachment 2 Mirror adjustment procedure
• 8. Field assembly inspection report