Komatsu HM300-5E0 Articulated Dump Truck Field Assembly Instruction GEN00190-01

Description

• Model List:
  • HM300-5E0 Articulated Dump Truck

• 1. Cover
• 2. Drawings of removed units
• 3. Dimensions of removed units
• 4. Assembly procedure, necessary equipments, and schedule
• 5. Necessary tools and equipments
• 6. Assembly procedure
• 6.1. Installation of the sling
• 6.2. Stationary bare machine (travel)
• 6.3. Stationary bare machine (nontravel)
• 6.4. Installation of tire and wheel assembly
• 6.5. Installation of front under mirror
• 6.6. Installation of L.H. fender step
• 6.7. Installation of L.H. fender mirror
• 6.8. Installation of L.H. fender mudguard
• 6.9. Installation of R.H. fender handrail
• 6.10. Installation of R.H. fender mirror
• 6.11. Installation of R.H. fender mudguard
• 6.12. Installation of antenna
• 6.13. Installation of payload and revolving lamp
• 6.14. Installation of payload
• 6.15. Sling and put stationary dump body
• 6.16. Subassembly of dump body
• 6.17. Subassembly of dump body without dump body heating (optional)
• 6.18. Subassembly of dump body with dump body heating
• 6.19. ADT assembly Bushing installation (optional)
• 6.20. ADT assembly side arm installation (optional)
• 6.21. ADT assembly procedure for assembling side arm mounting bolts (optional)
• 6.22. ADT assembly tailgate installation (optional)
• 6.23. ADT assembly with tailgate (optional)
• 6.24. ADT assembly with tailgate (optional)
• 6.25. ADT assembly greasing pipe installation (optional)
• 6.26. Installation of dump body
• 6.27. Connection of hoist cylinder
• 6.28. Installation of fire prevention cover for hoist piping
• 6.29. Connection and adjustment of dump angle sensor
• 6.30. Installation and adjustment of dump body bottom mount
• 6.31. Installation of dump body stopper
• 6.32. Installation of end bolt after installing dump body
• 6.33. Touch up painting of dump body
• 6.34. Sticking of decal on dump body
• 6.35. Sticking of decal on dump body (optional)
• 6.36. Dump body control calibration
• 6.37. Adjustment1 of rearview monitor
• 6.38. Adjustment2 of rearview monitor
• 6.39. Adjustment3 of rearview monitor
• 6.40. Adjustment4 of rearview monitor
• 6.41. N2 gas adjustment of front and rear suspension
• 6.42. No. Attachment 1 Mirror adjustment procedure
• 6.43. No. Attachment 2 Mirror adjustment procedure
• 7. Machine check sheet for field assembly