Komatsu HM400-2 Articulated Dump Truck Field Assembly Instruction GEN00042-04

Description

• Model List:
  • HM400-2 Articulated Dump Truck

• 1. Cover
• 2. Contents
• 3. Drawings of removed units
• 4. Dimensions of removed units
• 5. Assembly procedure, necessary equipments, and schedule
• 6. Necessary tools and equipments
• 7. Assembly procedure No.
• 7.1. No.0100 Positioning bare machine
• 7.2. No.0150 Installation of rear monitor
• 7.3. No.0200 Installing L.H. and R.H. overfenders
• 7.4. No.0300 Installing L.H. and R.H. mudguards
• 7.5. No.0400 Installing engine hood mirror
• 7.6. No.0410 Installing engine hood mirror (KAL specification)
• 7.7. No.0500 Adjusting N2 gas of front and rear suspensions
• 7.8. No.A0100 Installation of antenna
• 7.9. No.H0100 Installation of handrail (KAL specification)
• 7.10. No.T0100 Assembly of tail gate Installation of brackets
• 7.11. No.T0200 Assembly of tail gate Installation of bearings
• 7.12. No.T0300 Assembly of tail gate Installation of side arms
• 7.13. No.T0400 Assembly of tail gate Installation of tail gate
• 7.14. No.T0500 Assembly of tail gate Installation of cushion
• 7.15. No.T0600 Assembly of tail gate Installation of wires
• 7.16. No.W0020 Install chock bracket on the right and left (KAL specification)
• 7.17. Attached sheet Mirror adjustment procedure
• 8. Extension specification
• 8.1. Drawings of removed units
• 8.2. Dimensions of removed units
• 8.3. Necessary tools and equipments
• 8.4. Assembly procedure
• 8.4.1. No.0010 Setting of bare machine
• 8.4.2. No.0020 Assembly of tail gate
• 8.4.3. No.0030 Installation of protector
• 8.4.4. No.0040 Installation of side extension
• 8.4.5. No.0050 Installation of tail gate 1
• 8.4.6. No.0060 Installation of tail gate 2
• 8.4.7. No.0070 Connection and fixing of grease tubes
• 8.4.8. No.0080 Greasing
• 8.4.9. No.0090 Touch up painting of body
• 9. Appendix Field assembly inspection report