Komatsu PC128UU-1 Avance Hydraulic Excavator Operation and Maintenance Manual CEAM004200

Description

• Model List:
  • PC128UU-1 Avance Hydraulic Excavator

• 1. MAIN MENU
• 2. COVER
• 3. INTRODUCTION
• 4. SAFETY INFORMATION
• 5. OVERVIEW OF THE EQUIPMENT
• 5.1. DESIGNATED USES
• 5.2. FEATURES OF THIS MACHINE
• 5.3. BREAKIN
• 6. MEMO
• 7. LOCATION OF SERIAL NUMBER PLATES, AND FORM TO ENTER SERIAL NUMBER AND NAME OF THE DISTRIBUTOR
• 7.1. LOCATION OF SERIAL NUMBER
• 7.2. LOCATION OF ENGINE SERIAL NUMBER
• 7.3. FORM FOR ENTERING THE CYLINDER NUMBER AND THE KOMATSU DISTRIBUTOR
• 8. TABLE OF CONTENTS
• 9. SAFETY
• 10. BASIC PRECAUTIONS
• 11. PRECAUTIONS FOR OPERATING
• 11.1. BEFORE STARTING THE ENGINE
• 11.2. AFTER STARTING THE ENGINE
• 11.3. TRANSPORT THE VEHICLE
• 11.4. BATTERY
• 11.5. TOWING
• 11.6. BUCKET WITH HOOK
• 12. PRECAUTIONS FOR MAINTENANCE
• 12.1. PRIOR TO PERFORMING MAINTENANCE
• 12.2. DURING MAINTENANCE
• 13. WHERE SAFETY LABELS HAVE BEEN ATTACHED
• 13.1. WHERE SAFETY LABELS ARE LOCATED
• 14. OPERATION
• 15. THE NAME OF EACH PART
• 15.1. GENERAL DIAGRAM OF THE VEHICLE
• 15.2. GENERAL VIEW OF CONTROLS AND GAUGES
• 16. EXPLANATION OF EACH DEVICE
• 16.1. VEHICLE MONITOR PANEL
• 16.2. SWITCHES
• 16.3. CONTROL LEVERS / PEDALS
• 16.4. ENGINE HOOD
• 16.5. FRONT WINDOW
• 16.6. SLIDING DOOR
• 16.7. FUSE BOX
• 16.8. FUSIBLE LINK
• 16.9. LOCKING CAP AND COVERS
• 16.10. TOOL BOX
• 16.11. GREASE GUN HOLDER
• 16.12. CONTROLLERS
• 16.13. ASHTRAY (OPTIONAL)
• 16.14. REAR UNDER VIEW MIRROR (OPTIONAL)
• 16.15. USING THE CAR RADIO
• 16.16. USING THE AIR CONDITIONER
• 17. OPERATION
• 17.1. CHECKS BEFORE STARTING THE ENGINE
• 17.2. STARTING THE ENGINE
• 17.3. CHECKS AND TASKS TO BE PERFORMED AFTER STARTING THE ENGINE
• 17.4. MOVING THE MACHINE
• 17.5. STEERING THE MACHINE
• 17.6. STOPPING THE MACHINE
• 17.7. SWINGING
• 17.8. PROHIBITED ACTIONS WHILE OPERATING THE MACHINE
• 17.9. PRECAUTIONS DURING OPERATION
• 17.10. PRECAUTIONS WHEN CLIMBING OR DESCENDING SLOPES
• 17.11. EXTRICATING THE MACHINE FROM MUD
• 17.12. OPERATIONS THAT CAN BE PERFORMED WITH THE HYDRAULIC EXCAVATOR
• 17.13. CHANGING THE BUCKET
• 17.14. PARKING THE MACHINE
• 17.15. CHECKS AFTER COMPLETING OPERATION
• 17.16. STOPPING THE ENGINE
• 17.17. CHECKS AFTER THE ENGINE HAS BEEN STOPPED
• 17.18. LOCKING
• 17.19. USING THE 4 SYSTEMS
• 17.20. USING RUBBER TRACK SHOES (FOR MACHINES SPECIFIED FOR USE WITH RUBBER TRACKS)
• 18. TRANSPORTING
• 18.1. HOW TO LOAD AND UNLOAD THE VEHICLE
• 18.2. PRECAUTIONS WHEN CARRYING THINGS
• 18.3. PRECAUTIONS WHEN TRANSPORTING
• 19. HANDLING IN COLD WEATHER
• 19.1. PREPARATION FOR LOW TEMPERATURES
• 19.2. PRECAUTIONS AFTER COMPLETING OPERATIONS
• 19.3. PREPARING THE CAR HEATER
• 19.4. AFTER THE COLD WEATHER SEASON IS OVER
• 20. LONGTERM STORAGE
• 20.1. BEFORE STORING THE MACHINE
• 20.2. DURING STORAGE
• 20.3. AFTER STORAGE
• 21. TROUBLESHOOTING
• 21.1. PHENOMENA THAT ARE NOT BREAKDOWNS
• 21.2. HOW TO TOW WITH THE MACHINE OR BE TOWED
• 21.3. HOW TO USE THE HOOK FOR TOWING LIGHT OBJECTS
• 21.4. PRECAUTIONS FOR SPECIAL JOB SITES
• 21.5. WHEN THE BATTERY IS DEAD
• 21.6. WHEN THIS PHENOMENON OCCURS
• 22. CHECKS AND MAINTENANCE
• 23. PRECAUTIONS IN PERFORMING CHECKS AND MAINTENANCE
• 24. BASIC MAINTENANCE
• 24.1. ESSENTIAL INFORMATION ON OIL, FUEL AND COOLANT
• 24.2. SUMMARY OF ELECTRICAL SYSTEM
• 24.3. SUMMARY OF HYDRAULIC SYSTEM
• 25. CONSUMABLE SUPPLIES
• 26. USAGE OF FUEL AND LUBRICATING GREASE ACCORDING TO AMBIENT TEMPERATURE
• 26.1. FUEL / OIL
• 26.2. COOLANT
• 27. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
• 27.1. LIST OF TOOLS NECESSARY
• 27.2. TORQUE TABLE
• 28. ABOUT REGULAR REPLACEMENT OF IMPORTANT COMPONENTS
• 29. LIST OF MAINTENANCE
• 29.1. MAINTENANCE SCHEDULE
• 29.2. SERVICE TIME WHEN USING HYDRAULIC BREAKERS
• 29.3. MAINTENANCE SCHEDULE
• 30. SERVICE PROCEDURES
• 30.1. INITIAL SERVICE AFTER 250 HOURS OF OPERATION
• 30.2. MAINTENANCE THAT IS NOT REGULARLY SCHEDULED
• 30.3. CHECKS BEFORE STARTING OPERATIONS
• 30.4. SERVICE TO BE PERFORMED AFTER EVERY 50 HOURS OF OPERATION
• 30.5. SERVICE TO BE PERFORMED AFTER EVERY 100 HOURS OF OPERATION
• 30.6. SERVICE TO BE PERFORMED AFTER EVERY 250 HOURS OF OPERATION
• 30.7. SERVICE TO BE PERFORMED AFTER EVERY 500 HOURS OF OPERATION
• 30.8. SERVICE TO BE PERFORMED AFTER EVERY 1000 HOURS OF OPERATION
• 30.9. SERVICE TO BE PERFORMED AFTER EVERY 2000 HOURS OF OPERATION
• 30.10. SERVICE TO BE PERFORMED AFTER EVERY 4000 HOURS OF OPERATION
• 31. INSPECTIONS REQUIRED
• 31.1. BEFORE BEGINNING WORK (CHECKS PRIOR TO STARTING OPERATIONS)
• 31.2. CHECKS BEFORE BEGINNING WORK (CHECKS PRIOR TO STARTING OPERATIONS)
• 32. SPECIFICATIONS
• 33. SPECIFICATIONS
• 34. OPTIONAL PARTS, ATTACHMENTS
• 35. GENERAL PRECAUTIONS
• 35.1. SAFETY PRECAUTIONS
• 35.2. PRECAUTIONS WHEN ATTACHMENTS ARE INSTALLED
• 36. USING THE BUCKET WITH HOOK
• 36.1. CHECKING THE BUCKET WITH HOOK ATTACHED FOR DAMAGE
• 36.2. OPERATIONS THAT SHOULD NOT BE PERFORMED
• 36.3. PRECAUTIONS DURING OPERATION
• 37. USING SEAT BELTS
• 37.1. SEAT BELTS
• 38. INFORMATION ON OPTIONAL ATTACHMENTS
• 38.1. INFORMATION ON OPTIONAL ATTACHMENTS
• 38.2. ATTACHMENT COMBINATION TABLE
• 38.3. SELECTING TRACKS
• 38.4. USING RUBBER PAD TRACKS
• 38.5. USING THE AUTOMATIC LEVELING DEVICE
• 38.6. USING THE MONOBOOM
• 38.7. USING VEHICLES TO WHICH ATTACHMENTS CAN BE INSTALLED (MONOBOOM)
• 38.8. SWITCHING OPERATION PATTERNS (ON MACHINES WHICH HAVE A PATTERN SWITCHING VALVE INSTALLED)