Komatsu PC350LC-8, PC350NLC-8 Hydraulic Excavator Operation and Maintenance Manual UEAM007013
Komatsu PC350LC-8, PC350NLC-8 Hydraulic Excavator Operation and Maintenance Manual UEAM007013 - Image 2
Komatsu PC350LC-8, PC350NLC-8 Hydraulic Excavator Operation and Maintenance Manual UEAM007013 - Image 3
Komatsu PC350LC-8, PC350NLC-8 Hydraulic Excavator Operation and Maintenance Manual UEAM007013 - Image 4
Komatsu PC350LC-8, PC350NLC-8 Hydraulic Excavator Operation and Maintenance Manual UEAM007013 - Image 5

Komatsu PC350LC-8, PC350NLC-8 Hydraulic Excavator Operation and Maintenance Manual UEAM007013

$30.00

  • Type Of Manual: Operation and Maintenance Manual
  • Manual ID: UEAM007013
  • Format: PDF
  • Size: 15.8MB
  • Number of Pages: 500
Category:

Description

  • Model List:

    • PC350LC-8 Hydraulic Excavator
    • PC350NLC-8 Hydraulic Excavator
  • 1. FOREWORD
  • 1.1. FOREWORD
  • 1.2. SAFETY INFORMATION
  • 1.2.1. Noise emission levels
  • 1.2.2. Vibration levels
  • 1.3. INTRODUCTION
  • 1.3.1. DEMOLITION WORK
  • 1.3.2. DIRECTIONS OF MACHINE
  • 1.3.3. OPERATOR PROTECTIVE STRUCTURE
  • 1.3.4. VISIBILITY FOR OPERATOR
  • 1.3.5. BREAKINGIN THE NEW MACHINE
  • 1.4. PRODUCT INFORMATION
  • 1.4.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
  • 1.4.2. EPA REGULATIONS, ENGINE NUMBER PLATE
  • 1.4.3. FLUORINATED GREENHOUSE GASES
  • 1.4.4. SERVICE METER LOCATION
  • 1.4.5. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
  • 1.4.6. MACHINE SERIAL PLATE
  • 1.4.7. DECLARATION OF CONFORMITY
  • 1.4.8. ATTACHMENTS AND OPTIONS
  • 1.4.9. LONG REACH BOOM AND ARM
  • 1.4.10. INDEX
  • 1.4.11. COLOPHON
  • 2. SAFETY
  • 2.1. SAFETY INFORMATION
  • 2.2. SAFETY LABELS
  • 2.2.1. LOCATION OF SAFETY LABELS
  • 2.2.2. SAFETY LABELS
  • 2.3. SAFETY INFORMATION
  • 2.3.1. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
  • 2.4. SAFETY MACHINE OPERATION
  • 2.4.1. STARTING ENGINE
  • 2.4.2. OPERATION
  • 2.4.3. TRANSPORTATION
  • 2.4.4. BATTERY
  • 2.4.5. TOWING
  • 2.4.6. LIFTING OBJECTS WITH BUCKET LINK LIFTING DEVICE (OPTIONAL EQUIPMENT)
  • 2.4.7. LIFTING OBJECTS WITH BUCKET
  • 2.5. SAFETY MAINTENANCE INFORMATION
  • 3. OPERATION
  • 3.1. MACHINE VIEW ILLUSTRATIONS
  • 3.1.1. OVERALL MACHINE VIEW
  • 3.1.2. CONTROLS AND GAUGES
  • 3.2. DETAILED CONTROLS AND GAUGES
  • 3.2.1. MONITORING SYSTEM
  • 3.2.2. SWITCHES
  • 3.2.3. DIESEL PARTICULATE FILTER (DPF) MONITOR
  • 3.2.4. CONTROL LEVERS AND PEDALS
  • 3.2.5. SUN ROOF
  • 3.2.6. WINDSHIELD
  • 3.2.7. EMERGENCY ESCAPE HAMMER
  • 3.2.8. AIR CONDITIONER CONTROLS
  • 3.2.9. RADIO
  • 3.2.10. AUXILIARY ELECTRIC POWER
  • 3.2.11. FUSE
  • 3.2.12. FUSIBLE LINK
  • 3.2.13. CONTROLLER
  • 3.2.14. TOOL BOX
  • 3.2.15. GREASE PUMP HOLDER
  • 3.2.16. FIRE EXTINGUISHER
  • 3.2.17. REFUELLING PUMP
  • 3.2.18. HANDLING THE ACCUMULATOR
  • 3.3. MACHINE OPERATIONS AND CONTROLS
  • 3.3.1. BEFORE STARTING ENGINE
  • 3.3.2. STARTING ENGINE
  • 3.3.3. AMBIENT TEMPERATURE RANGE FOR OPERATION AND STORAGE
  • 3.3.4. AFTER STARTING ENGINE
  • 3.3.5. STOPPING THE ENGINE
  • 3.3.6. MACHINE OPERATION
  • 3.3.7. STEERING THE MACHINE
  • 3.3.8. SWINGING
  • 3.3.9. WORK EQUIPMENT CONTROLS AND OPERATIONS
  • 3.3.10. WORKING MODE
  • 3.3.11. PROHIBITED OPERATIONS
  • 3.3.12. GENERAL OPERATION INFORMATION
  • 3.3.13. TRAVELLING ON SLOPES
  • 3.3.14. ESCAPE FROM MUD
  • 3.3.15. RECOMMENDED APPLICATIONS
  • 3.3.16. BUCKET REPLACEMENT AND INVERSION
  • 3.3.17. PARKING MACHINE
  • 3.3.18. MACHINE INSPECTION AFTER DAILY WORK
  • 3.3.19. LOCKING
  • 3.4. TRANSPORTATION
  • 3.4.1. TRANSPORTATION PROCEDURE
  • 3.4.2. LOADING AND UNLOADING WITH TRAILER
  • 3.4.3. LIFTING MACHINE
  • 3.5. COLD WEATHER OPERATION
  • 3.5.1. COLD WEATHER OPERATION INFORMATION
  • 3.5.2. AFTER DAILY WORK COMPLETION
  • 3.5.3. AFTER COLD WEATHER SEASON
  • 3.6. LONG TERM STORAGE
  • 3.6.1. BEFORE STORAGE
  • 3.6.2. DURING STORAGE
  • 3.6.3. AFTER STORAGE
  • 3.6.4. STARTING MACHINE AFTER LONGTERM STORAGE
  • 3.7. TROUBLES AND ACTIONS
  • 3.7.1. RUNNING OUT OF FUEL
  • 3.7.2. PHENOMENA THAT ARE NOT FAILURES
  • 3.7.3. TOWING THE MACHINE
  • 3.7.4. LIGHTWEIGHT TOWING HOLE
  • 3.7.5. SEVERE JOB CONDITION
  • 3.7.6. DISCHARGED BATTERY
  • 3.7.7. OTHER TROUBLE
  • 4. MAINTENANCE
  • 4.1. MAINTENANCE INFORMATION
  • 4.2. OUTLINE OF SERVICE
  • 4.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
  • 4.2.2. EXPLANATION OF LUBRICATION CHART DECAL
  • 4.2.3. ELECTRIC SYSTEM MAINTENANCE
  • 4.3. WEAR PARTS
  • 4.3.1. WEAR PARTS LIST
  • 4.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
  • 4.4.1. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
  • 4.5. TIGHTENING TORQUE SPECIFICATIONS
  • 4.5.1. TIGHTENING TORQUE LIST
  • 4.6. SAFETY CRITICAL PARTS
  • 4.6.1. SAFETY CRITICAL PARTS LIST
  • 4.7. MAINTENANCE SCHEDULE
  • 4.7.1. MAINTENANCE SCHEDULE CHART
  • 4.7.2. MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
  • 4.8. MAINTENANCE PROCEDURE
  • 4.8.1. INITIAL 1000 HOURS MAINTENANCE (ONLY AFTER THE FIRST 1000 HOURS)
  • 4.8.2. WHEN REQUIRED
  • 4.8.3. CHECK BEFORE STARTING
  • 4.8.4. EVERY 50 HOURS MAINTENANCE
  • 4.8.5. EVERY 250 HOURS MAINTENANCE
  • 4.8.6. EVERY 500 HOURS MAINTENANCE
  • 4.8.7. EVERY 1000 HOURS MAINTENANCE
  • 4.8.8. .EVERY 2000 HOURS MAINTENANCE
  • 4.8.9. EVERY 4000 HOURS MAINTENANCE
  • 4.8.10. EVERY 5000 HOURS MAINTENANCE
  • 4.8.11. EVERY 8000 HOURS MAINTENANCE
  • 4.9. AUTOMATIC GREASE SYSTEM
  • 4.9.1. Filling the grease reservoir
  • 4.9.2. Method of filling grease reservoir
  • 4.9.3. Indication on the incab display
  • 4.10. END OF SERVICE LIFE
  • 5. SPECIFICATIONS
  • 5.1. SPECIFICATIONS
  • 5.1.1. EXPLANATION OF LIFTING CAPACITY CHART
  • 5.1.2. EXPLANATION OF LIFTING CAPACITY CHART (STRAIGHT BOOM)
  • 6. ATTACHMENTS AND OPTIONS
  • 6.1. GENERAL PRECAUTIONS FOR SAFETY
  • 6.1.1. PRECAUTIONS WHEN SELECTING
  • 6.1.2. READ THE INSTRUCTION MANUAL THOROUGHLY
  • 6.1.3. PRECAUTIONS WHEN REMOVING OR INSTALLING
  • 6.1.4. PRECAUTIONS WHEN USING
  • 6.1.5. SPECIFICATIONS
  • 6.1.6. ARM/PIN INFORMATION
  • 6.2. HYDRAULIC QUICK COUPLER PIPING
  • 6.2.1. LOCATIONS
  • 6.2.2. OPERATION
  • 6.3. BUCKET WITH HOOK
  • 6.3.1. HOOK CONDITION
  • 6.3.2. PROHIBITED OPERATIONS
  • 6.4. MACHINE READY FOR ATTACHMENT
  • 6.4.1. LOCATIONS
  • 6.4.2. HYDRAULIC CIRCUIT
  • 6.4.3. ATTACHMENT REMOVAL AND INSTALLATION
  • 6.4.4. ATTACHMENT OPERATIONS
  • 6.4.5. LONG TERM STORAGE
  • 6.5. ATTACHMENT GUIDE
  • 6.5.1. ATTACHMENT COMBINATIONS
  • 6.5.2. HANDLING CLAMSHELL BUCKET
  • 6.6. RECOMMENDED ATTACHMENT OPERATIONS
  • 6.6.1. HYDRAULIC BREAKER
  • 6.7. HANDLING MACHINES EQUIPPED WITH KOMTRAX
  • 6.7.1. BASIC PRECAUTIONS
  • 6.8. PC BOOM
  • 6.8.1. FEATURES OF 2PIECE BOOM ARM
  • 6.8.2. EXPLANATION OF LIFTING CAPACITY CHART
  • 6.8.3. TRANSPORTATION
  • 6.9. STRAIGHT BOOM
  • 6.9.1. GENERAL VIEW OF MACHINE
  • 6.9.2. CAUTION ITEMS
  • 6.9.3. SPECIFICATIONS
  • 6.9.4. WORKING RANGE (PC 350 STRAIGHT BOOM)
  • 6.10. SUPER LONG FRONT BOOM AND ARM
  • 6.10.1. OPERATION INSTRUCTION
  • 6.10.2. WORKING MODES
  • 6.10.3. TRANSPORT STORAGE OF SUPER LONG FRONT MACHINE
  • 6.10.4. WORKING RANGE OF SUPER LONG FRONT
  • 6.10.5. MAINTENANCE
  • 7. LONG REACH BOOM AND ARM
  • 7.1. OPERATION INSTRUCTIONS
  • 7.1.1. WORKING MODES
  • 7.2. CONTROL LEVERS, PEDALS
  • 7.3. TRANSPORT STORAGE OF 17m LONG REACH MACHINE
  • 7.3.1. INSTALLATION OF SUPPORTING LINK
  • 7.3.2. TRANSPORTATION OF 17m LONG REACH MACHINE
  • 7.4. WORKING RANGE OF 17m LONG REACH
  • 7.5. LIFTING CAPACITY PC350 LC 17m LONG REACH
  • 7.6. MAINTENANCE
  • 7.6.1. SPECIAL SERVICE REQUIREMENTS FOR 17m LONG REACH WORK EQUIPMENT
Rate this product

Reviews

There are no reviews yet.

Be the first to review “Komatsu PC350LC-8, PC350NLC-8 Hydraulic Excavator Operation and Maintenance Manual UEAM007013”

Your email address will not be published. Required fields are marked *

Related products