Description
-
Model List:
- BMP 8500 Multi Purpose Compactor
- 1. BMP 8500
- 2. Multipurpose compactor
- 3. General notes
- 4. Description of indicators and control elements
- 5. General
- 6. Tests before taking into operation
- 7. BOSS safety system
- 8. Electronic immobilizer
- 9. Starting the engine
- 10. Driving the machine (cable remote control)
- 11. Safety inspection for the cable remote control
- 12. Switching the vibration on and off
- 13. Shut down the engine
- 14. Shutting down the engine manually
- 15. Starting operation of the radio remote control
- 16. Replacing, recharging the radio remote control power pack
- 17. Safety inspection for the radio remote control
- 18. Switching off of the radio remote control in case of radio interferences
- 19. Entering the machine type code into the display module
- 20. Teaching the BOSS safety system transponder
- 21. Assembling/removing the drum extension
- 22. Loading and transport
- 23. General notes on maintenance
- 24. Fuels and lubricants
- 25. Table of fuels and lubricants
- 26. Runningin instructions
- 27. Maintenance table
- 28. Check the engine oil level
- 29. Check the hydraulic oil level
- 30. Check the fuel level
- 31. Fuel filter, draining off water
- 32. Check the coolant level
- 33. Check the air intake hose
- 34. Changing engine oil and oil filter
- 35. Checking, tensioning, replacing the Vbelt
- 36. Clean the cooling fins on engine and hydraulic oil cooler
- 37. Change the oil in the vibrator shaft housing
- 38. Checking the central screw of the drive hub
- 39. Draining the fuel tank sludge
- 40. Changing the fuel pre cleaner, bleeding the fuel system
- 41. Battery service, checking the main battery switch
- 42. Check the rubber buffers
- 43. Checking, adjusting the valve clearance
- 44. Safety field measurement of the Boss safety system
- 45. Change hydraulic oil and filter
- 46. Change the coolant
- 47. Change the fuel lines
- 48. Checking the injection pressure
- 49. Checking the fuel injection pump
- 50. Checking the fuel injection timing
- 51. Check, clean, replace the combustion air filter
- 52. Adjust the scrapers
- 53. Tightening torques for screws with metric unified thread
- 54. Engine conservation
- 55. General notes
- 56. Engine problems
- 57. Problems with remote control Hetronic with spiral cable
- 58. Problems with radio remote control Hetronic in radio operation
- 59. Faults in BOSS safety system
- 60. Fault indicator
- 61. Fault code
- 62. Input codes for BLM control
There are no reviews yet.