JCB 750, 1200, 1650, 2150 Drillmaster Operator Manual

Description

• Model List:
  • 750, 1200, 1650, 2150 Drillmaster

• 1. INTRODUCTION
• 2. About this Manual 1
• 3. Units of Measurement 1
• 4. Warranty 1
• 5. Carrier Machine – Suitability 1
• 6. GENERAL DESCRIPTION
• 7. Check List – Equipment 2
• 8. Attachment Identification 2
• 9. Component Identification 2
• 10. Safety First 2
• 11. SAFETY
• 12. Safety Check List 3
• 13. Decals 4
• 14. INSTALLING AND REMOVING
• 15. Installing-Removing (JCB 160, 165, 170, 185,
• 16. 190, 1110 Robot Skid Steer Loaders) 5
• 17. Installing-Removing (JCB 2CX, 2DX Backhoe
• 18. Loaders. Loader End and JCB Loadalls) 5
• 19. Installing-Removing (JCB 801 Series Mini
• 20. Excavators) 6
• 21. Hose Guides (JCB 3CX, 4CX, 214, 215, 217,
• 22. Backhoe Loaders only – Excavator End) 7
• 23. Backhoe Loaders – Excavator End
• 24. Installing 8
• 25. Removing 8
• 26. Augers 9
• 27. OPERATION
• 28. Safety First 10
• 29. Principles of Hole Drilling 10
• 30. Drilling – Do’s and Dont’s 10
• 31. Travelling 11
• 32. MAINTENANCE
• 33. Safety First 12
• 34. Obtaining Replacement Parts 12
• 35. Service Schedules 12
• 36. Drive Chain – Lubrication 13
• 37. Drive Chain – Adjustment 13
• 38. Drive Shaft Bearing – Adjustment 14
• 39. Auger Wear Parts – Replacing 15
• 40. Teeth and Pilot Bit – Removing-Replacing 15
• 41. SERVICE
• 42. Principle of Operation 16
• 43. Fault Finding 16
• 44. Earth Drill – Dismantling 17
• 45. Earth Drill – Assembly 17
• 46. SPECIFICATION
• 47. Technical Data 18
• 48. Weight of Total Installation-Sample Calculation 18
• 49. Recommended Drillmaster-Auger Combinations 19
• 50. WARRANTY and PROCEDURE
• 51. At rear of Manual