Description
-
Model List:
- D31EX-21 Galeo Bull Dozer
- D31PX-21 Galeo Bull Dozer
- D37EX-21 Galeo Bull Dozer
- D37PX-21 Galeo Bull Dozer
- 1. COVER
- 2. FOREWORD
- 2.1. FOREWORD
- 2.2. SAFETY INFORMATION
- 2.3. INTRODUCTION
- 2.3.1. FRONT/REAR,LEFT/RIGHT DIRECTIONS OF MACHINE
- 2.4. NECESSARY INFORMATION
- 2.4.1. MACHINE SERIAL NO.PLATE AND POSITION
- 2.4.2. ENGINE SERIAL NO.PLATE AND POSITION
- 2.4.3. EMISSION CONTROL INFORMATION LABEL AND POSITION
- 2.4.4. POSITION OF SERVICE METER
- 2.4.5. TABLE OF ENTER SERIAL NO.AND DISTRIBUTORN
- 3. CONTENTS
- 4. SAFETY
- 4.1. SAFETY
- 4.2. SAFETY LABELS
- 4.2.1. POSITION OF SAFETY PICTOGRAMS
- 4.2.2. SAFETY LABELS
- 4.3. GENERAL PRECAUTIONS
- 4.3.1. SAFETY RULES
- 4.3.2. IF ABNORMALITIES ARE FOUND
- 4.3.3. CLOTHING AND PERSONAL PROTECTIVE ITEMS
- 4.3.4. FIRE EXTINGUISHER AND FIRST AID KIT
- 4.3.5. SAFETY FEATURES
- 4.3.6. KEEP MACHINE CLEAN
- 4.3.7. INSIDE OPERATORS COMPARTMENT
- 4.3.8. ALWAYS APPLY LOCK WHEN LEAVING OPERATORS SEAT
- 4.3.9. HANDRAILS AND STEPS
- 4.3.10. MOUNTING AND DISMOUNTING
- 4.3.11. NO PEOPLE ON ATTACHMENTS
- 4.3.12. CRUSHING OR CUTTING PREVENTION
- 4.3.13. PREVENTION OF BURNS
- 4.3.14. FIRE PREVENTION
- 4.3.15. ACTION IF FIRE OCCURS
- 4.3.16. WINDOW WASHER LIQUID
- 4.3.17. PRECAUTIONS WHEN USING ROPS
- 4.3.18. PRECAUTIONS FOR ATTACHMENTS
- 4.3.19. UNAUTHORIZED MODIFICATION
- 4.3.20. SAFETY AT WORKSITE
- 4.3.21. WORKING ON LOOSE GROUND
- 4.3.22. DO NOT GO CLOSE TO HIGHVOLTAGE CABLES
- 4.3.23. ENSURE GOOD VISIBILITY
- 4.3.24. VENTILATION FOR ENCLOSED ARESA
- 4.3.25. CHECKING SIGNALMANS SIGNALS AND SIGNS
- 4.3.26. EMERGENCY EXIT FROM OPERATORS CAB
- 4.3.27. BE CAREFUL ABOUT ASBESTOS DUST
- 4.4. PRECAUTIONS FOR OPERATION
- 4.4.1. STARTING ENGINE
- 4.4.1.1. CHECKS BEFORE STARTING ENGINE
- 4.4.1.2. PRECAUTIONS WHEN STARTING
- 4.4.1.3. PRECAUTIONS IN COLD AREAS
- 4.4.2. OPERATION
- 4.4.2.1. CHECKS BEFORE OPERATION
- 4.4.2.2. PRECAUTIONS FOR MOVING MACHINE FORWORD OR IN REVERSE
- 4.4.2.3. PRECAUTIONS WHEN TRAVELING
- 4.4.2.4. TRAVELING ON SLOPES
- 4.4.2.5. OPERATE CAREFULLY ON SNOW
- 4.4.2.6. PARKING MACHINE
- 4.4.3. TRANSPORTATION
- 4.4.3.1. LOADING AND UNLOADING
- 4.4.3.2. SHIPPING
- 4.4.4. BATTERY
- 4.4.4.1. BATTERY HAZARD PREVENTION
- 4.4.4.2. STARTING WITH BOOSTER CABLE
- 4.4.5. TOWING
- 4.4.5.1. WHEN TOWING
- 4.5. PRECAUTIONS FOR MAINTENANCE
- 4.5.1. WARNING TAG
- 4.5.2. KEEP WORK PLACE CLEAN AND TIDY
- 4.5.3. APPOINT LEADER WHEN WORKING WITH OTHERS
- 4.5.4. STOP ENGINE BEFORE CARRIYING OUT INSPECTION AND MAINTENANCE
- 4.5.5. TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING
- 4.5.6. PROPER TOOLS
- 4.5.7. NO UNAUTHORIZER PERSONNEL INTO AREA
- 4.5.8. ATTACHMENTS
- 4.5.9. WORK UNDER THE MACHINE
- 4.5.10. NOISE
- 4.5.11. PRECAUTIONS WHEN USING HAMMER
- 4.5.12. REPAIR WELDING
- 4.5.13. REMOVING BATTERY TERMINAL
- 4.5.14. PRECAUTIONS WHEN USING HIGHPRESSURE GREASE TO ADJUST TRACK TENSION
- 4.5.15. DO NOT DISASSEMBLE RECOIL SPRING
- 4.5.16. PRECAUTIONS WITH HIGHPRESSURE OIL
- 4.5.17. HANDLING HIGHPRESSURE HOSES
- 4.5.18. WASTE MATERIAL
- 4.5.19. MAINTENANCE OF AIR CONDITIONER
- 4.5.20. COMPRESSED AIR
- 4.5.21. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 5. OPERATION
- 5.1. GENERAL VIEW
- 5.1.1. GENERAL VIEW OF MACHINE
- 5.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
- 5.2. EXPLANATION OF COMPONENTS
- 5.2.1. MONITOR PANEL
- 5.2.2. SWITCHS
- 5.2.3. CONTROL LEVERS AND PEDALS
- 5.2.4. FUSE
- 5.2.5. ELECTRIC POWER TAKEOUT ADAPTER
- 5.2.6. DOOROPEN LOCK
- 5.2.7. SASH GLASS INTERMEDIATE LOCK
- 5.2.8. CAP,COVER WITH LOCK
- 5.2.9. DOOR POCKET
- 5.2.10. ASHTRAY
- 5.2.11. LUNCHBOX HOLDER BELT
- 5.2.12. CUP HOLDER
- 5.2.13. TOOL BOX
- 5.2.14. GREASE PUMP HOLDER
- 5.2.15. CAR STEREO,HANDLING
- 5.2.16. AIR CONDITIONER,HANDLING
- 5.3. OPERATION
- 5.3.1. CHECK BEFORE STARTING ENGINE,ADJUST
- 5.3.2. STARTING ENGINE
- 5.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
- 5.3.4. STOPPING ENGINE
- 5.3.5. CHECK AFTER STOPPING ENGINE
- 5.3.6. MACHINE OPERATION
- 5.3.7. SHIFTING GEAR
- 5.3.8. SHIFTING BETWEEN FORWARD AND REVERSE
- 5.3.9. STEERING MACHINE
- 5.3.10. PRECAUTIONS FOR OPERATION
- 5.3.11. WORK POSSIBLE USING BULLDOZER
- 5.3.12. PARKING MACHINE
- 5.3.13. CHECK AFTER FINISHING WORK
- 5.3.14. LOCKING
- 5.3.15. TIPS FOR LONGER UNDERCARRIAGE LIFE
- 5.4. TRANSPORTATION
- 5.4.1. TRANSPORTATION MEANS
- 5.4.2. PRECAUTIONS WHEN REMOVING WORK EQUIPMENT
- 5.4.3. REMOVING CAB
- 5.4.4. LOADING,UNLOADING WORK
- 5.4.5. LIFTING MACHINE
- 5.5. COLD WEATHER OPERATION
- 5.5.1. PRECAUTIONS FOR LOW TEMPERATURE
- 5.5.2. AFTER COMPLETION OF WORK
- 5.5.3. AFTER COLD WEATHER
- 5.6. LONGTERM STORAGE
- 5.6.1. BEFORE STORAGE
- 5.6.2. DURING STORAGE
- 5.6.3. AFTER STORAGE
- 5.7. TROUBLESHOOTING
- 5.7.1. AFTER RUNNING OUT OF FUEL
- 5.7.2. MACHINE TOWING METHOD
- 5.7.3. IF BATTERY IS DISCHARGED
- 5.7.4. WHEN ENGINE DOES NOT STOP
- 5.7.5. OTHER TROUBLE
- 6. MAINTENANCE
- 6.1. GUIDES TO MAINTENANCE
- 6.2. OUTLINES OF SERVICE
- 6.2.1. OUTLINE OF OIL,FUEL,COOLANT
- 6.2.2. RELATING TO ELECTRIC SYSTEM
- 6.3. WEAR PARTS LIST
- 6.3.1. WEAR PARTS LIST
- 6.4. USE OF FUEL,COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- 6.4.1. PROPER SELECTION OF FUEL,COOLANT AND LUBRICANTS
- 6.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- 6.5.1. TORQUE LIST
- 6.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 6.6.1. SAFETY CRITICAL PARTS
- 6.7. MAINTENANCE SCHEDULE CHART
- 6.7.1. MAINTENANCE SCHEDULE CHART
- 6.8. SERVICE PROCEDURE
- 6.8.1. WHEN REQUIRED
- 6.8.1.1. CHECK,CLEAN AND REPLACE AIR CLEANER ELEMENT
- 6.8.1.2. CLEAN INSIDE OF COOLING SYSTEM
- 6.8.1.3. CHECK TRACK TENSION
- 6.8.1.4. CHECK AND TIGHTEN TRACK SHOE BOLTS
- 6.8.1.5. CHECK ELECTRICAL INTAKE AIR HEATER
- 6.8.1.6. REVERSE AND REPLACE END BITS AND CUTTING EDGES
- 6.8.1.7. CHECK IDLER OIL LEVEL,ADD OIL
- 6.8.1.8. ADJUST IDLER CLEARANCE
- 6.8.1.9. ADJUST PLAY IN CENTER BALL
- 6.8.1.10. GREASE DOOR HINGE
- 6.8.1.11. CHECK DOOR LOCK STRIKER
- 6.8.1.12. CHECK,ADJUST AIR CONDITIONER
- 6.8.1.13. CHECK WINDOW WASHER FLUID LEVEL,ADD FLUID
- 6.8.1.14. REPLACE WIPER BLADE
- 6.8.1.15. PROCEDURE FOR BLEEDING AIR IN HYDRAULIC SYSTEM
- 6.8.1.16. PROCEDURE FOR RELEASING INTERNAL PRESSURE OF HYDRAULIC SYSTEM
- 6.8.2. CHECK BEFORE STARTING
- 6.8.3. EVERY 50 HOURS SERVICE
- 6.8.3.1. DRAIN WATER,SEDIMENT FROM FUEL TANK
- 6.8.4. EVERY 250 HOURS SERVICE
- 6.8.4.1. LUBRICATING
- 6.8.4.2. CHECK OIL LEVEL IN FINAL DRIVE CASE,ADD OIL
- 6.8.4.3. CHECK LEVEL OF BATTRY ELECTROLYTE
- 6.8.4.4. CHECK BRAKE PERFORMANCE
- 6.8.4.5. CLEAN AIR CONDITIONER AIE FILTER(FRESH/RECIRC FILTER)
- 6.8.5. EVERY 500 HOURS SERVICE
- 6.8.5.1. REPLACE FUEL FILTER CARTRIDGE
- 6.8.5.2. CHANGE OIL ENGINE OIL PAN,REPLACE ENGINE OIL FILTER CARTRIDGE
- 6.8.5.3. REPLACE CORROSION RESISTER CARTRIDGE
- 6.8.5.4. CLEAN,CHECK RADIATOR FINS AND OIL COOLER FINS
- 6.8.6. EVERY 1000 HOURS SERVICE
- 6.8.6.1. CHANGE OIL IN FINAL DRIVE CASE
- 6.8.6.2. CHECK FAN BELT TENSION,ADJUST
- 6.8.6.3. CHECK ALL TIGHTENING PARTS OF TURBOCHARGER
- 6.8.6.4. CHECK PLAY OF TURBOCHARGER ROTOR
- 6.8.6.5. CHECK FOR LOOSE ROPS MOUNT BOLTS
- 6.8.7. EVERY 2000 HOURS SERVICE
- 6.8.7.1. CHANGE OIL IN HYDRAULIC TANK,REPLACE OIL FILTER CARTRIDGE AND CLEAN SUCTION STRAINER
- 6.8.7.2. CLEAN,CHECK TURBOCHARGER
- 6.8.7.3. CHECK VIBRATION DAMPER
- 6.8.7.4. CHECK ALTERNATOR,STARTING MOTOR
- 6.8.7.5. CHECK ENGINE VALVE CLEARANCE,ADJUST
- 6.8.8. EVERY 4000 HOURS SERVICE
- 6.8.8.1. CHECK WATER PUMP
- 7. SPECIFICATIONS
- 7.1. SPECIFICATIONS
- 8. ATTACHMENTS,OPTIONS
- 8.1. GENERAL PRECAUTIONS
- 8.1.1. PRECAUTIONS RELATED TO SAFETY
- 8.2. DELUXE SEAT
- 8.3. HEADREST
- 8.4. EQUIPPING FIRE EXTINGUISHER AND FIRSTAID KIT
- 9. INDEX
There are no reviews yet.